A microlens array structure that prevents automated photocopying is presented. This copy defeat laminate (CDL) employs a cylindrical lens array structure in conjunction with a mask pattern to prevent at-normal viewing of the document. Image brightness perceived by the human eye is reviewed as well as basic radiometry. Equations for Lambertian and CDL image brightness are derived. The brighter-than-white appearance of a CDL covered document is explained. Designs for the full-page-defeat and full-page-view versions of the CDL are presented.
Download full-text PDF |
Source |
|---|---|
| http://dx.doi.org/10.1364/ao.36.005363 | DOI Listing |
Publication Analysis
Top Keywords
Similar Publications
Conventional light field measurement using a micro-lens array suffers from grid-like artifacts in the refocused image because the sub-aperture images are sampled at linear and equal intervals like a grid pattern. In this study, we propose a method for measuring light field using a pair of wedge prisms and a method for calibrating the sub-aperture position. The epitrochoids trajectory of rays generated by rotating prisms yields unequal intervals and variable sampling of the sub-aperture position.
View Article and Find Full Text PDFThis work investigates how misalignments of collimation lenses affect two performance criteria: minimum throughput within an angular window and maximum beam height. Based on these criteria, we establish an alignment concept for the first section of a LiDAR emitter. The performance criteria are derived from the overall LiDAR system requirements and applied to an optical system consisting of a laser diode array source, a microlens array for slow-axis collimation, and an acylinder for fast-axis collimation.
View Article and Find Full Text PDFCylindrical microlens arrays are important optical elements for autostereoscopic display. Conventional fixed focal length cylindrical microlens arrays do not allow switching between 2D mode and 3D mode when constructing a 3D viewing zone. In contrast, cylindrical liquid crystal microlens arrays with zoom characteristics allow switching between 2D and 3D states, as well as adjusting the width of the sub-viewing zone.
View Article and Find Full Text PDFPrecision glass molding (PGM) technology, as an efficient and straightforward method for producing glass lenses, has been widely applied in the mass production of aspheric glass lenses. However, molding complex surfaces such as free-form and array surfaces is still in its infancy. To reveal the variations of temperature and stress of microlens array (MLA) optical elements during the molding process, a simulation model was established using the finite element method (FEM), and the heating and forming stages of a chalcogenide glass MLA optical element were studied.
View Article and Find Full Text PDFThis paper proposes an imaging technique to remove strong reflections from specular surfaces using polarization characteristics combined with light field imaging. Firstly, the correct strong reflection region is found by studying the reflected light characteristics, and the strong reflection region highlights are filtered out using Stokes parameters based on polarization information. Then, a system of microlens arrays with different transmittances was built for imaging, and the system was image-corrected to enable more information about the scene to be captured.
View Article and Find Full Text PDFWant AI Summaries of new PubMed Abstracts delivered to your In-box?
Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!