2,3-Dimethyl-2,3-diisobutyl succinonitrile was identified as the main volatile organic compound (>90%) emitted from laser printers during the printing process. Experiments were carried out in a large environmental chamber of 30 m3, where the printers were placed and working simulating 'real office setting' conditions. Air samples were taken on Tenax TA adsorbent cartridges in the vicinity of the printers and further analyzed by thermal desorption gas chromatography/mass spectrometry (TDGC/MS). The structure of the compound has been determined and is presented in this study. Additional data obtained by nuclear magnetic resonance (NMR), Fourier transform infrared (FTIR) spectroscopy, and liquid chromatography/tandem mass spectrometry (LC/MS/MS) support the proposed structure, with no reported CAS number, as 2,3-dimethyl-2,3-diisobutyl succinonitrile. It is a byproduct of the thermal decomposition of 2,2'-azobis(2,4-dimethyl valeronitrile), a commercially available free radical polymerization initiator used in polymerization processes during the manufacture of the toners. By means of head-space GC/MS, 15 toners used in black & white and colour printers have been investigated. Six of them contained 2,3-dimethyl-2,3-diisobutyl succinonitrile, which has also been detected in the respective processed paper.
Download full-text PDF |
Source |
|---|---|
| http://dx.doi.org/10.1002/rcm.3386 | DOI Listing |
Publication Analysis
Top Keywords
Similar Publications
Rapid Na Transport Pathway and Stable Interface Design Enabling Ultralong Life Solid-State Sodium Metal Batteries.
Angew Chem Int Ed Engl
December 2024
School of Materials Science and Engineering, State Key Laboratory of Fine Chemicals, Frontiers Science Center for Smart Materials Oriented Chemical Engineering, Technology Innovation Center of High Performance Resin Materials (Liaoning Province), Dalian University of Technology, Dalian, 116024, China.
Sodium-metal batteries (SMBs) using solid-state polymer electrolytes (SPEs) show impressive superiority in energy density and safety. As promising candidates for SPEs, solid-state plastic crystal electrolytes (SPCE) based on succinonitrile (SN) plastic crystal could achieve high ion conductivity and wide voltage window. Nonetheless, the notorious SN decomposition reaction on the electrode/electrolyte interface seriously challenges the stable operation of the battery.
View Article and Find Full Text PDFUnlocking Sulfide Solid-State Battery Longevity by the Paradigm of Dual-Functional Plastic Crystal.
ACS Nano
January 2025
Department of Chemistry, Collaborative Innovation Center of Chemistry for Energy Materials, Shanghai Key Laboratory of Molecular Catalysis and Innovative Materials, Institute of New Energy, Fudan University, Shanghai 200438, China.
The utilization of sulfide-based solid electrolytes represents an attractive avenue for high safety and energy density all-solid-state batteries. However, the potential has been impeded by electrochemical and mechanical stability at the interface of oxide cathodes. Plastic crystals, a class of organic materials exhibiting remarkable elasticity, chemical stability, and ionic conductivity, have previously been underutilized due to their susceptibility to dissolution in liquid electrolytes.
View Article and Find Full Text PDFHigh-Rate 4.2 V Solid-State Potassium Batteries by In Situ Polymerized Epoxide Ether Electrolyte.
Nano Lett
January 2025
College of Materials Science and Engineering, Hunan Joint International Laboratory of Advanced Materials and Technology of Clean Energy, Hunan Province Key Laboratory for Advanced Carbon Materials and Applied Technology, Hunan University, Changsha 410082, China.
Article Synopsis
- Solid-state metallic potassium batteries (SSMPBs) are gaining attention as alternatives to lithium batteries, but face challenges like low ionic conductivity and high interfacial resistance.
- Researchers achieved improved performance by using in situ ring-opening polymerization with a plasticizer and catalyst, resulting in short-chain polyether electrolytes that significantly enhance ionic conductivity.
- The developed SSMPBs show a high discharge capacity of 69 mAh/g at 100 mA/g and 88.8% capacity retention after 100 cycles, outperforming previous SSMPB studies.
Breaking Solvation Dominance Effect Enabled by Ion-Dipole Interaction Toward Long-Spanlife Silicon Oxide Anodes in Lithium-Ion Batteries.
Nanomicro Lett
December 2024
State Key Laboratory of Space Power-Sources, School of Chemistry and Chemical Engineering, Harbin Institute of Technology, Harbin, 150001, People's Republic of China.
Micrometer-sized silicon oxide (SiO) anodes encounter challenges in large-scale applications due to significant volume expansion during the alloy/de-alloy process. Herein, an innovative deep eutectic electrolyte derived from succinonitrile is introduced to enhance the cycling stability of SiO anodes. Density functional theory calculations validate a robust ion-dipole interaction between lithium ions (Li) and succinonitrile (SN).
View Article and Find Full Text PDFNon-Flammable fluorinated gel polymer electrolyte for safe lithium metal batteries in harsh environments.
J Colloid Interface Sci
December 2024
Jiangsu Key Laboratory of Materials and Technologies for Energy Storage, College of Materials Science and Technology, Nanjing University of Aeronautics and Astronautics, Nanjing 210016, China; State Key Laboratory of Mechanics and Control for Aerospace Structures, Nanjing University of Aeronautics and Astronautics, Nanjing 210016, China.
Compared to liquid electrolytes, gel polymer electrolytes (GPEs) offer enhanced safety and represent an up-and-coming option for high-energy-density lithium metal batteries (LMBs). However, several challenges hindered the practical application of GPEs for LMBs, such as low ionic conductivity at room temperature, decomposition at high voltage, and poor interfacial compatibility with lithium anode. In this study, a non-flammable fluorinated GPE was synthesized using 2,2,2-trifluoroethyl acrylate (TFEA) and ethoxylated trimethylolpropane triacrylate (ETPTA) as precursor materials, with succinonitrile (SN) incorporated as a plasticizer and a dual-salt system of lithium bis(trifluoro-methane) sulfonimide and lithium difluoroxalate borate.
View Article and Find Full Text PDFWant AI Summaries of new PubMed Abstracts delivered to your In-box?
Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!