The dynamic temperature phase sensitivity of a three-layer optical fiber is calculated for unjacketed as well as Al- and Hytrel-coated fibers. The calculations include both the variation of the refractive index with temperature and the thermally induced axial and radial strains. The calculated phase sensitivity indicates that it is currently possible to measure a 1-microdegree C temperature change at frequencies exceeding 50 kHz with 1 cm of a metal coated optical fiber.
Download full-text PDF |
Source |
|---|---|
| http://dx.doi.org/10.1364/ao.22.000478 | DOI Listing |
Publication Analysis
Top Keywords
Similar Publications
Mechanisms of the Photomechanical Response in Thin-Film Dye-Doped Glassy Polymers.
Polymers (Basel)
January 2025
Department of Physics, Washington State University, Pullman, WA 99163, USA.
This work aims to determine the mechanism of the photomechanical response of poly(Methyl methacrylate) polymer doped with the photo-isomerizable dye Disperse Red 1 using the non-isomerizable dye Disperse Orange 11 as a control to isolate photoisomerization. Samples are free-standing thin films with thickness that is small compared with the optical skin depth to assure uniform illumination and photomechanical response throughout their volume, which differentiates these studies from most others. Polarization-dependent measurements of the photomechanical stress response are used to deconvolute the contributions of angular hole burning, molecular reorientation and photothermal heating.
View Article and Find Full Text PDFHigh-Performance Optical Fiber Displacement Sensor with Extended Linear Range and Sensitivity.
Sensors (Basel)
January 2025
Department of Communications Engineering, University of the Basque Country, 48013 Bilbao, Spain.
Optical Fiber Displacement Sensors (OFDSs) provide several advantages over conventional sensors, including their compact size, flexibility, and immunity to electromagnetic interference. These features make OFDSs ideal for use in confined spaces, such as turbines, where direct laser access is impossible. A critical aspect of OFDS performance is the geometry of the fiber bundle, which influences key parameters such as sensitivity, range, and dead zones.
View Article and Find Full Text PDFAn Ultra-Wide Range D-Shaped Fiber SPR Sensor with a Nanostructure of Gold-MoS and Sodium for the Simultaneous Measurement of Refractive Index and Temperature.
Sensors (Basel)
January 2025
School of Physics and Electronic Engineering, Guangzhou University, Guangzhou 510006, China.
Refractive index (RI) and temperature (T) are both critical environmental parameters for environmental monitoring, food production, and medical testing. The paper develops a D-shaped photonic crystal fiber (PCF) sensor to measure RI and T simultaneously. Its cross-sectional structure encompasses a hexagonal-hole lattice, with one hole selectively filled with toluene for temperature sensing.
View Article and Find Full Text PDFLaboratory Tests Using Distributed Fiber Optical Sensors for Strain Monitoring.
Sensors (Basel)
January 2025
Civil Engineering Department, Polytechnic School, University of Sao Paulo, São Paulo 05508-220, Brazil.
Using fiber optics as a tool for different kinds of geotechnical monitoring can be highly attractive and cost-effective when compared to conventional instruments, such as piezometers and inclinometers, among others. A single fiber optic cable may cover a larger monitoring area compared to conventional instrumentation and allows for monitoring more than one physical quantity with the same fiber optic cable. The literature provides several different examples of distributed fiber optic systems usage.
View Article and Find Full Text PDFDistributed Fiber Optic Strain Sensing Technology for Monitoring Soil Deformation Induced by Leakage in Buried Water Pipelines: A Model Test Study.
Sensors (Basel)
January 2025
State Key Laboratory of Hydrology-Water Resources and Hydraulic Engineering, Nanjing Hydraulic Research Institute, Nanjing 210029, China.
Water pipelines in water diversion projects can leak, leading to soil deformation and ground subsidence, necessitating research into soil deformation monitoring technology. This study conducted model tests to monitor soil deformation around leaking buried water pipelines using distributed fiber optic strain sensing (DFOSS) technology based on optical frequency domain reflectometry (OFDR). By arranging strain measurement fibers in a pipe-soil model, we investigated how leak location, leak size, pipe burial depth, and water flow velocity affect soil strain field monitoring results.
View Article and Find Full Text PDFWant AI Summaries of new PubMed Abstracts delivered to your In-box?
Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!