Objectives: The purpose of this study was to compare torsional strength, ductility and fracture behaviors of Ti-6Al-7Nb, CP Ti and Co-Cr alloy castings after laser welding.
Methods: Dumbbell-shaped castings of three metal alloys (Ti-6Al-7Nb alloy, CP Ti, Co-Cr alloy) were cut in half and laser welded with a Nd:YAG pulse laser-welding machine at either 220V or 260V of laser voltage. After being laser welded, all cast specimens were tested with a multi-axial hydraulic testing machine (MTS 858 Mini Bionix) using a torsional test. The fracture surfaces were investigated with a scanning electron microscope.
Results: None of the laser-welded Ti-6Al-7Nb alloy and CP Ti castings was broken within the welded joint, showing torsional strength as high as the unwelded castings. Unlike the other groups, the laser-welded Co-Cr alloy castings exhibited brittle fracture appearance and provided substantially less torsional strength.
Significance: The torsional strength of the laser-welded Ti-6Al-7Nb alloy and CP Ti castings was as high as that of the unwelded castings while this finding could not apply to the Co-Cr alloy castings. This indicates that the mechanical strength of the laser-welded Ti-6Al-7Nb alloy dental casting is sufficient for clinical applications.
Download full-text PDF |
Source |
---|---|
http://dx.doi.org/10.1016/j.dental.2007.10.002 | DOI Listing |
Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!