The potential for solar ultraviolet (UV) radiation to act as a significant abiotic control of Cryptosporidium parvum oocysts in nature is unknown. Infectivity of C. parvum following exposure to artificial UV-B and natural solar radiation, with and without UV wavelengths, was tested under controlled pH and temperature conditions. Percent infectivity of exposed oocysts was determined by in vitro cell culture. Artificial UV-B exposures of 32 and 66 kJ/m2 significantly decreased oocyst infectivity by an average of 58 and 98%, respectively. Exposure of oocysts to approximately half and full intensity of full solar spectrum (all wavelengths) for a period of less than 1 day (10 h) in mid-summer reduced mean infectivity by an average of 67% and >99.99%, respectively. Exposure of the C. parvum oocysts to UV-shielded solar radiation (>404 nm) in early autumn reduced mean infectivity by 52%, while full spectrum solar radiation (exposure at all wavelengths) reduced mean infectivity by 97%. The data provide strong evidence that exposure to natural solar radiation can significantly reduce C. parvum infectivity. Direct effects of solar radiation on oocysts in nature will depend on the depth distribution of the oocysts, water transparency, mixing conditions, and perhaps other environmental factors such as temperature, pH, and stress.
Download full-text PDF |
Source |
---|---|
http://dx.doi.org/10.1021/es071324r | DOI Listing |
J Environ Manage
January 2025
Graduate School of Media and Governance, Keio University, 5322 Endo, Fujisawa City, Kanagawa Prefecture, 252-0882, Japan. Electronic address:
The adoption of residential renewable energy is pivotal for achieving the 'Net Zero' goal, yet financial assessments of household investments in this area remain complex due to dynamic market conditions. This study introduces a novel closed-form financial valuation framework for residential solar photovoltaic (PV) systems, explicitly addressing the uncertainties of electricity market price fluctuations (market risk) and energy policy changes (policy risk) using Geometric Brownian Motion (GBM). A case study in France demonstrates the framework's application, revealing that the discount rate is the most influential factor in solar PV valuation, followed by system lifespan and policy-driven Feed-in Tariff (FiT) rates.
View Article and Find Full Text PDFAdv Mater
January 2025
Department of Applied Physical Sciences, University of North Carolina at Chapel Hill, Chapel Hill, NC, 27599, USA.
Perovskite technologies has taken giant steps on its advances in only a decade time, from fundamental science to device engineering. The possibility to exploit this technology on a thin flexible substrate gives an unbeatable power to weight ratio compares to similar photovoltaic systems, opening new possibilities and new integration concepts, going from building integrated and applied photovoltaics (BIPV, BAPV) to internet of things (IoT). In this perspective, the recent progress of perovskite solar technologies on flexible substrates are summarized, focusing on the challenges that researchers face upon using flexible substrates.
View Article and Find Full Text PDFJ Exp Biol
January 2025
Department of Biology, San Francisco State University, San Francisco, CA 94132, USA.
One notable consequence of climate change is an increase in the frequency, scale and severity of heat waves. Heat waves in terrestrial habitats (atmospheric heat waves, AHW) and marine habitats (marine heat waves, MHW) have received considerable attention as environmental forces that impact organisms, populations and whole ecosystems. Only one ecosystem, the intertidal zone, experiences both MHWs and AHWs.
View Article and Find Full Text PDFACS Energy Lett
January 2025
Department of Chemistry and Centre for Processable Electronics, Molecular Sciences Research Hub, Imperial College London, London W12 0BZ, U.K.
Antisolvent treatment is used in the fabrication of perovskite films to control grain growth during spin coating. We study widely incorporated aromatic hydrocarbons and aprotic ethers, discussing the origin of their performance differences in 2D/3D Sn perovskite (PEAFASnI) solar cells. Among the antisolvents that we screen, diisopropyl ether yields the highest power conversion efficiency in solar cells.
View Article and Find Full Text PDFACS Energy Lett
January 2025
Department of Materials, Imperial College London, Exhibition Road, London SW7 2AZ, U.K.
Antimony sulfide (SbS) is a promising candidate as an absorber layer for single-junction solar cells and the top subcell in tandem solar cells. However, the power conversion efficiency of SbS-based solar cells has remained stagnant over the past decade, largely due to trap-assisted nonradiative recombination. Here we assess the trap-limited conversion efficiency of SbS by investigating nonradiative carrier capture rates for intrinsic point defects using first-principles calculations and Sah-Shockley statistics.
View Article and Find Full Text PDFEnter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!