Atmospheric concentrations of polybrominated diphenyl ethers at near-source sites.

Environ Sci Technol

Department of Integrated Natural Sciences, Arizona State University West Campus, P.O. Box 37100, Phoenix, Arizona 85069, USA.

Published: September 2007

Concentrations of polybrominated diphenyl ethers (PBDEs) were determined in air samples from near suspected sources, namely an indoors computer laboratory, indoors and outdoors at an electronics recycling facility, and outdoors at an automotive shredding and metal recycling facility. The results showed that (1) PBDE concentrations in the computer laboratorywere higherwith computers on compared with the computers off, (2) indoor concentrations at an electronics recycling facility were as high as 650,000 pg/m3 for decabromodiphenyl ether (PBDE 209), and (3) PBDE 209 concentrations were up to 1900 pg/m3 at the downwind fenceline at an automotive shredding/metal recycling facility. The inhalation exposure estimates for all the sites were typically below 110 pg/kg/day with the exception of the indoor air samples adjacent to the electronics shredding equipment, which gave exposure estimates upward of 40,000 pg/kg/day. Although there were elevated inhalation exposures at the three source sites, the exposure was not expected to cause adverse health effects based on the lowest reference dose (RfD) currently in the Integrated Risk Information System (IRIS), although these RfD values are currently being re-evaluated by the U.S. Environmental Protection Agency. More research is needed on the potential health effects of PBDEs.

Download full-text PDF

Source
http://dx.doi.org/10.1021/es070844jDOI Listing

Publication Analysis

Top Keywords

recycling facility
16
concentrations polybrominated
8
polybrominated diphenyl
8
diphenyl ethers
8
air samples
8
electronics recycling
8
pbde 209
8
exposure estimates
8
health effects
8
atmospheric concentrations
4

Similar Publications

Unlabelled: Global aquaculture production faces the challenge of biologically cycling nitrogenous waste. Biofloc technology (BFT) systems offer the potential to reduce water consumption and eliminate waste products by using beneficial microorganisms to convert waste into usable nutrients or non-toxic molecules. Unlike flow-through systems (FTS), which depend on continuous water exchange and result in higher operational costs as well as limited microbiome stability, BFT operates without the need for constant water exchange.

View Article and Find Full Text PDF

This study investigates the primary data collected at a used cooking oil (UCO) recycling facility to quantify its environmental impact when used as a rejuvenator in high content reclaimed asphalt pavement (RAP) mixes. Annual energy consumption data sets on transportation, storage, filtration, machinery, and purification are assessed using the life cycle assessment (LCA) methodology with the LCA software Simapro 9.4 to evaluate the influential parameters and processes in reducing emissions.

View Article and Find Full Text PDF

Polyethylene terephthalate (PET) is a widely utilized synthetic polymer, favored in various applications for its desirable physicochemical characteristics and widespread accessibility. However, its extensive utilization, coupled with improper waste disposal, has led to the alarming pollution of the environment. Thus, recycling PET products is essential for diminishing global pollution and turning waste into meaningful materials.

View Article and Find Full Text PDF

Workers in electronics waste and lamp recycling facilities are at risk of exposure to elemental mercury through inhalation of mercury vapor and mercury-containing dust. Employers at an electronics waste and lamp recycling facility in Ohio that crushes mercury-containing lamps expressed concerns about mercury exposure from work processes and requested a health hazard evaluation by CDC's National Institute for Occupational Safety and Health (NIOSH). In April 2023, NIOSH conducted a multidisciplinary investigation to assess elemental and inorganic mercury exposures, including epidemiologic, environmental, and ventilation assessments.

View Article and Find Full Text PDF

An elastocaloric thermal battery based on generative learning-designed phase-change alloys is developed to facilitate the efficient recycling of low-temperature waste heat. This battery stores thermal energy as latent heat in a phase-change alloy and releases it on demand through applied stress at ambient temperature. Alloy compositions and corresponding processing parameters, tailored to desired transformation characteristics, are efficiently discovered through a generative learning-enabled inverse design framework, which converts the hand-drawn target heat flow curve into tangible compositional and processing designs.

View Article and Find Full Text PDF

Want AI Summaries of new PubMed Abstracts delivered to your In-box?

Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!