Changes in the activity and structure of alkaline phosphatase (ALP) and L-lactate dehydrogenase (LDH) were investigated after high pressure processing (HPP). HPP treatments (206-620 MPa for 6 and 12 min) were applied to ALP and LDH prepared in buffer, fat-free milk, and 2% fat milk. Enzyme activities were measured using enzymatic assays, and changes in structure were investigated using far-ultraviolet circular dichroism (CD) spectroscopy and dynamic light scattetering (DLS). Kinetic data indicated that the activity of ALP was not affected after 6 min of pressure treatments (206-620 MPa), regardless of the medium in which the enzyme was prepared. Increasing the processing time to 12 min did significantly reduce the activity of ALP at 620 MPa (P < 0.001). However, even the lowest HPP treatment of 206 MPa induced a reduction in LDH activity, and the course of reduction increased with HPP treatment until complete inactivation at 482, 515, and 620 MPa. CD data demonstrated a partial change in the secondary structure of ALP at 620 MPa, whereas the structure of LDH showed gradual denaturation after exposure at 206 MPa for 6 min, leading to a random coil structure at both 515 and 620 MPa. DLS results indicated aggregation of ALP only at HPP treatment of 206 MPa and not above and enzyme precipitation as well as aggregation at 345, 415, 482, and 515 MPa. The loss of LDH activity with increasing pressure and time treatment was due to the combined effects of denaturation and aggregation.
Download full-text PDF |
Source |
---|---|
http://dx.doi.org/10.1021/jf071518q | DOI Listing |
Nanoscale
January 2025
Department of Orthopedic Surgery, The Second Hospital of Dalian Medical University, No. 467, Zhongshan Road, Shahekou District, Dalian City, Liaoning 116021, China.
The use of bioresorbable compositions has been considered a promising therapeutic approach for treating compromised bone tissues. Gellan gum (GG) is a predominant polysaccharide recognized for its exceptional biocompatibility and biodegradability, facile bio-fabrication, and customizable mechanical attributes, rendering it well-suited for developing versatile bone scaffolds. On the other hand, MXene nanosheets have been declared a representational filler to augment the osteogenic effect and amend the mechanical properties of the polymeric biomaterials.
View Article and Find Full Text PDFMaterials (Basel)
December 2024
Department of Non-Ferrous Metals, AGH University of Science and Technology, 30-059 Krakow, Poland.
The aim of this study was to compare the mechanical properties of carbon-fiber-reinforced polymer (CFRP) composites produced using three popular technologies. The tests were performed on composites produced from prepregs in an autoclave, the next variant is composites produced using the infusion method, and the third variant concerns composites produced using the vacuum-assisted hand lay-up method. For each variant, flat plates with dimensions of 1000 mm × 1000 mm were produced while maintaining similar material properties and fabric arrangement configuration.
View Article and Find Full Text PDFSci Rep
December 2024
MARE-Marine and Environmental Sciences Centre & ARNET-Aquatic Research Network Associated Laboratory - CETEMARES, Av. do Porto de Pesca 30, Peniche, 2520-620, Portugal.
The management and creation of Marine Protected Areas (MPAs) is currently under great focus, with international organisations aiming to protect 30% of our oceans by 2030. The success of MPAs depends on a nuanced understanding of local ecological dynamics and threats, which can significantly influence ecosystem balance. Herbivory can be a stressor for foundation species, namely kelp forests, contributing to their decline in several regions of the globe.
View Article and Find Full Text PDFMater Horiz
December 2024
Chemical Sciences Division, Oak Ridge National Laboratory, Oak Ridge, TN 37831, USA.
Glass fiber reinforced polymer (GFRP) composites are valued for their strength and cost-effectiveness. However, traditional GFRPs often face challenges for end-of-life recycling due to their non-depolymerizable thermoset matrices, and long-term performance due to inadequate interfacial adhesion, which can lead to fiber-matrix delamination. Here, we have designed dynamic fiber-matrix interfaces to allow tough and closed-loop recyclable GFRPs by utilizing a vitrimer, derived from upcycled polystyrene--poly(ethylene--butylene)--polystyrene (SEBS) with boronic ester (S-Bpin) and amine-based diol crosslinker.
View Article and Find Full Text PDFInt J Biol Macromol
November 2024
Pharmaceutical Sciences Research Center, Health Technology Institute, Kermanshah University of Medical Sciences, Kermanshah, Iran.
Most conventional wound dressings do not meet the clinical requisites owing to their limited multifunctionality. Herein, a bilayer wound dressing containing both hydrogel and fibrous structures with multifunctional features was developed for effective skin rehabilitation. Sodium alginate (SA)/gelatin (Gel) hydrogel comprising Matricaria chamomilla L extract and silver sulfadiazine (AgSD) drug as antibacterial agents was cross-linked using genipin and CaCl.
View Article and Find Full Text PDFEnter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!