AI Article Synopsis

  • * Increasing the applied voltage to 8 V results in a remnant polarization of 4.5 microC/cm² and a coercive field of 80 kV/cm, highlighting the material's ferroelectric properties.
  • * The research successfully developed a one-transistor-capacitor (1TC) structure for BZ1T9 ferroelectric RAM, utilizing a different type of thin-film transistor for better performance and smaller device size

Article Abstract

In this study, the Ba(Zr0.1Ti0.9)O3 (BZ1T9) thin films have been well deposited on the Pt/Ti/SiO2/Si substrate. The optimum radio frequency (RF) deposition parameters are developed, and the BZ1T9 thin films deposition at the optimum parameters have the maximum capacitance and dielectric constant of 4.4 nF and 190. As the applied voltage is increased to 8 V, the remnant polarization and coercive field of BZ1T9 thin films are about 4.5 microC/cm2 and 80 kV/cm. The counterclockwise current hysteresis and memory window of n-channel thin-film transistor property are observed, and that can be used to indicate the switching of ferroelectric polarization of BZ1T9 thin films. One-transistor-capacitor (1TC) structure of BZ1T9 ferroelectric random access memory device using bottom-gate amorphous silicon thin-film transistor was desirable because of the smaller size and better sensitivity. The BZ1T9 ferroelectric RAM devices with channel width = 40 microm and channel length = 8 microm has been successfully fabricated and the ID-VG transfer characteristics also are investigated in this study.

Download full-text PDF

Source
http://dx.doi.org/10.1109/tuffc.2007.457DOI Listing

Publication Analysis

Top Keywords

bz1t9 thin
16
thin films
16
ferroelectric ram
8
ram devices
8
thin-film transistor
8
bz1t9 ferroelectric
8
bz1t9
6
fabrication one-transistor-capacitor
4
one-transistor-capacitor structure
4
structure nonvolatile
4

Similar Publications

Article Synopsis
  • * Increasing the applied voltage to 8 V results in a remnant polarization of 4.5 microC/cm² and a coercive field of 80 kV/cm, highlighting the material's ferroelectric properties.
  • * The research successfully developed a one-transistor-capacitor (1TC) structure for BZ1T9 ferroelectric RAM, utilizing a different type of thin-film transistor for better performance and smaller device size
View Article and Find Full Text PDF

Want AI Summaries of new PubMed Abstracts delivered to your In-box?

Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!