Pyrolysis (Py)-GC/MS was applied to differentiate between automobile paint samples. The method was used for analysis of 36 samples of styrene acrylic urethane clearcoats that were indistinguishable on the basis of their infrared spectra and elemental composition. Differences observed in the obtained pyrograms of the compared paint samples were relatively small. Therefore, statistical analysis of the obtained results was performed. The likelihood ratio test suitable for multivariate data analysis supported by analysis of data structure by graphical model was used. This approach allowed not only distinguishing the samples compared, but also allowed the evaluation of the evidential value of such observations, which is very important from a forensic point of view.
Download full-text PDF |
Source |
|---|---|
| http://dx.doi.org/10.1016/j.chroma.2007.09.045 | DOI Listing |
Publication Analysis
Top Keywords
Similar Publications
Fabrication of Quasi-Solid Polymer Electrolytes for Lithium Metal Battery via Photopolymerization-Induced Microphase Separation.
ACS Appl Mater Interfaces
January 2025
Universite de Pau et des Pays de l'Adour, E2S UPPA, CNRS, IPREM, 64053, Pau, France.
The photopolymerization-induced microphase separation (photo-PIMS) process involving a reactive polymer block was implemented to fabricate nanostructured quasi-solid polymer electrolytes (QSPEs) for use in lithium metal batteries (LMBs). This innovative one-pot fabrication enhances interfacial properties in LMBs by enabling nanostructuring of QSPE directly onto the electrodes. This process also allows for customization of QSPE structural dimensions by tweaking the architecture and molar mass of poly[(oligo ethylene glycol) methyl ether methacrylate--styrene] (P(OEGMA--S)) macromolecular chain transfer agent.
View Article and Find Full Text PDFBioinspired bicontinuous adhesive hydrogel for wearable strain sensor with high sensitivity and a wide working range.
J Colloid Interface Sci
January 2025
Key Laboratory for Soft Chemistry and Functional Materials of Ministry of Education, Nanjing University of Science and Technology, Nanjing 210094 China. Electronic address:
Conductive hydrogel strain sensors demonstrate extensive potential in artificial robotics, human-computer interaction, and health monitoring, owing to their excellent flexibility and biocompatibility. Wearable strain sensors for real-time monitoring of human activities require hydrogels with self-adhesion, desirable sensitivity, and wide working range. However, balancing the high sensitivity and a wide working range remains a challenge.
View Article and Find Full Text PDFA Technical-Economic Study on Optimizing FDM Parameters to Manufacture Pieces Using Recycled PETG and ASA Materials in the Context of the Circular Economy Transition.
Polymers (Basel)
January 2025
Department of Mechanical Engineering, Doctoral School, Petroleum-Gas University of Ploiesti, 100680 Ploiesti, Romania.
Article Synopsis
- The paper focuses on optimizing FDM (Fused Deposition Modeling) parameters, specifically layer height (L) and infill density percentage (I), for creating tensile and compression samples from recycled PETG and ASA materials.
- The study employs value analysis to balance mechanical strength and production cost, revealing that layer height primarily affects tensile samples made from rPETG, while infill density is crucial for rASA samples.
- Ultimately, the research identifies optimal FDM settings (L = 0.20 mm and I = 100%) for producing parts from recycled materials, supporting circular economy practices in manufacturing.
Chain Transfer Kinetics of Rhodixan A1 RAFT/MADIX Agent.
Molecules
December 2024
Syensqo, Centre de Recherche et Innovation Aubervilliers, 52 Rue de la Haie Coq, 93308 Aubervilliers Cedex, France.
Rhodixan A1 is the trade name for -ethyl -(1-methoxycarbonylethyl)dithiocarbonate, a RAFT/MADIX agent used by Syensqo to produce block copolymer additives for aqueous formulations on an industrial scale. Chain transfer coefficients to Rhodixan A1 determined for 25 different styrenic, acrylate, and acrylamide monomers were relatively low (0.6 < C < 3.
View Article and Find Full Text PDFPolystyrene-Poly(acrylic acid) Block Copolymers for Encapsulation of Butyrylcholinesterase into Injectable Nanoreactors.
Biomolecules
December 2024
Institute of Fundamental Medicine and Biology, Kazan Federal University, 18 Kremlyovskaya St., 420008 Kazan, Russia.
The article is devoted to the creation of enzymatic nanoreactors based on polystyrene-block-poly(acrylic acid) (PS-b-PAA) copolymers containing bioscavengers capable of neutralizing toxic esters both in the body and in the environment. Block copolymers of different amphiphilicity, hydrophilicity and molecular weights were synthesized and characterized using gel permeation chromatography, NMR and UV spectroscopy. Polymeric nanocontainers in the absence and presence of human butyrylcholinesterase were made by film hydration and characterized by dynamic light scattering and microscopy methods.
View Article and Find Full Text PDFWant AI Summaries of new PubMed Abstracts delivered to your In-box?
Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!