The effect of bone bonding (KG Cera, Mina 13, and titanium) and nonbone bonding (KGy-213, M 8/1) implants on primary calcification in endosteal bone was examined by comparing changes in the morphometry of matrix vesicles to those occurring during normal bone healing following ablation of rat tibial marrow. The concentration of matrix vesicles, their diameter, and their distance from the calcification front were determined using computerized cytomorphometry at the transmission electron microscopic level. The results demonstrated that bone bonding materials supported an increase in matrix vesicle concentration when compared with control bone at 6 and 14 days postimplantation. At 14 days, there were fewer matrix vesicles in the bone adjacent to the nonbonding implants. Though matrix vesicle diameter decreased in the control bone between 6 and 14 days, it increased in all of the experimental samples. Diameters were significantly greater in the bone bonding samples at 14 days and significantly lower in the nonbonding samples at 6 days. Distance from the calcification front decreased between 6 and 14 days in all groups except in bone adjacent to the KGy-213 implants. In bone adjacent to the bone bonding implants, distance from the calcification front was comparable to or further than that of control bone; in the nonbonding samples it was closer to the calcification front. These results demonstrate that production and maturation of matrix vesicles is influenced in a differential manner by the presence of implant materials.
Download full-text PDF |
Source |
---|---|
http://dx.doi.org/10.1007/BF02556260 | DOI Listing |
Carbohydr Polym
March 2025
Department of Orthopedics Trauma and Microsurgery, Zhongnan Hospital, Wuhan University, Wuhan 430000, China; Hubei Clinical Medical Research Center of Trauma and Microsurgery, Wuhan 430000, China. Electronic address:
Functional injectable hydrogel (IH) is promising for infected bone defects (IBDs) repair, but how to endow it with desired antibacterial/immunoregulatory functions as well as avoid mechanical failures during its manipulation has posed as main challenges. Herein, rosmarinic acid (RosA), a natural product with antibacterial/immunoregulatory activities, was utilized to develop a FCR IH through forming phenylboronic acid ester bonds with 4-formylphenyl phenylboronic acid (4-FPBA) grafted chitosan (CS) (FC). After being applied to the IBD site, the FCR IH was then injected with tobramycin (Tob) solution, another alkaline antibacterial drug, to induce in situ crystallization of the FC, endowing the resultant FCRT hydrogel with adaptively enhanced mechanical strength and structural stability.
View Article and Find Full Text PDFACS Appl Bio Mater
January 2025
Advanced Magnetic Materials Research Center, School of Metallurgy and Materials Engineering, College of Engineering, University of Tehran, North Kargar Street, Tehran 11155-4563, Iran.
Although 3D printing is becoming a dominant technique for scaffold preparation in bone tissue engineering (TE), developing hydrogel-based ink compositions with bioactive and self-healing properties remains a challenge. This research focuses on developing a bone scaffold based on a composite hydrogel, which maintains its self-healing properties after incorporating bioactive glass and is 3D-printable. The plain hydrogel ink was synthesized using natural polymers of 1 wt % N-carboxyethyl chitosan, 2 wt % hyaluronic acid aldehyde, 0.
View Article and Find Full Text PDFFront Cardiovasc Med
December 2024
School of Pharmacy, Jiangsu Key Laboratory for Pharmacology and Safety Evaluation of Chinese Materia Medica, Nanjing University of Chinese Medicine, Nanjing, Jiangsu, China.
Cholesterol aggregation in dendritic cells (DCs) triggers an inflammatory response and accelerates the development of atherosclerosis (AS). Resveratrol (RES), a natural compound with anti-inflammatory and cholesterol metabolism regulatory properties, has been shown to influence the maturation and inflammatory functions of DCs. However, its relationship with cholesterol metabolism remains unclear.
View Article and Find Full Text PDFJ Prosthodont Res
January 2025
Department of Masticatory Function and Health Science, Division of Oral Health Sciences, Graduate School of Medical and Dental Sciences, Tokyo Medical and Dental University (TMDU), Tokyo, Japan.
Purpose: To compare the stress distribution in loaded zirconia resin-bonded fixed dental prostheses (RBFDPs) and periodontal tissue using finite element analysis, considering reduced alveolar bone levels and the number of retainers.
Methods: A human skull was micro-CT scanned. Three framework designs were tested: a 2-unit RBFDP using the maxillary left central incisor (#21) as an abutment, another using a canine (#23), and a 3-unit RBFDP using both #21 and #23.
Biomater Adv
December 2024
College of Biological Science and Engineering, Fuzhou University, No. 2 Xueyuan Road, Fuzhou 350108, China; Fujian Key Laboratory of Medical Instrument and Pharmaceutical Technology, Fuzhou University, No. 2 Xueyuan Road, Fuzhou 350108, China. Electronic address:
In anterior cruciate ligament (ACL) repair methods, the continuous enzymatic erosion of synovial fluid can impede healing and potentially lead to repair failure, as well as exacerbate articular cartilage wear, resulting in joint degeneration. Inspired by the blood clot during medial collateral ligament healing, we developed a composite scaffold comprising collagen (1 %, w/v) and polyvinyl alcohol (5 %, w/v) combined with platelet-rich plasma (PRP). The composite scaffold provides a protective barrier against synovial erosion for the ruptured ACL, while simultaneously facilitating tissue repair, thereby enhancing the efficacy of ACL repair techniques.
View Article and Find Full Text PDFEnter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!