We describe a self-limiting, low-energy argon-ion-milling process that enables noncircular device patterns, such as squares or hexagons, to be formed using precursor arrays of uniform circular openings in poly(methyl methacrylate) defined using electron beam lithography. The proposed patterning technique is of particular interest for bit-patterned magnetic recording medium fabrication, where square magnetic bits result in improved recording system performance. Bit-patterned magnetic medium is among the primary candidates for the next generation magnetic recording technologies and is expected to extend the areal bit density limits far beyond 1 Tbit/in(2). The proposed patterning technology can be applied either for direct medium prototyping or for manufacturing of nanoimprint lithography templates or ion beam lithography stencil masks that can be utilized in mass production.
Download full-text PDF |
Source |
|---|---|
| http://dx.doi.org/10.1021/nl071793r | DOI Listing |
Publication Analysis
Top Keywords
Similar Publications
Inverse design (ID) is a computational method that systematically explores a design space to find optimal device geometries based on specific performance criteria. In silicon photonics, ID often generates design features that degrade significantly due to the fabrication process, limiting the applicability of these devices in scalable fabrication. We demonstrate a solution to this performance degradation through fabrication-aware inverse design (FAID), integrating lithography models for deep-ultraviolet (DUV) lithography and electron-beam lithography (EBL) into the shape optimization approach of ID.
View Article and Find Full Text PDFThe cross talk and power consumption of the 2 × 2 optical switch is a key metric in the design of large-scale photonic integrated circuits (PICs). We build a theoretical model of a 2 × 2 Mach-Zehnder interferometer (MZI) optical switch, taking into account both imbalances in the arm loss and the coupler splitting ratio. The splitting ratio imbalance requirement for a given switch cross talk is summarized, which provides a guideline for the switch design.
View Article and Find Full Text PDFLong-wavelength infrared metamaterial absorber with polarization and angle insensitivity using compact hybrid cylindrical structures.
Nanoscale
December 2024
National Key Laboratory of Advanced Micro and Nano Fabrication Technology, Shanghai Jiao Tong University, Shanghai, 200240, China.
Broadband metamaterial absorbers in the long wavelength infrared region are promising in applications including thermal imaging, cloaking, radiative cooling and IR signature suppression. Although high absorption over the long wavelength infrared region has been extensively achieved, the challenge is to shrink both the thickness and lateral footprint of unit absorbing structures. Here, a compact broadband long wavelength infrared metamaterial absorber consisting of multilayered Ge/Ti/Ge/SiO hybrid cylindrical structures, whose period and thickness are only ∼1.
View Article and Find Full Text PDFOptimization of Soft X-Ray Fresnel Zone Plate Fabrication Through Joint Electron Beam Lithography and Cryo-Etching Techniques.
Nanomaterials (Basel)
November 2024
Nanotechnology Group, USAL-Nanolab, Departamento de Física Fundamental, Universidad de Salamanca (USAL), E-37008 Salamanca, Spain.
The ability to manufacture complex 3D structures with nanometer-scale resolution, such as Fresnel Zone Plates (FZPs), is crucial to achieve state-of-the-art control in X-ray sources for use in a diverse range of cutting-edge applications. This study demonstrates a novel approach combining Electron Beam Lithography (EBL) and cryoetching to produce silicon-based FZP prototypes as a test bench to assess the strong points and limitations of this fabrication method. Through this method, we obtained FZPs with 100 zones, a diameter of 20 µm, and an outermost zone width of 50 nm, resulting in a high aspect ratio that is suitable for use across a range of photon energies.
View Article and Find Full Text PDFRealization of all two-dimensional Bravais lattices with metasurface-based interference lithography.
Nanophotonics
April 2024
KAIST, Daejeon, Republic of Korea.
Proximity-field nanopatterning (PnP) have been used recently as a rapid, cost-effective, and large-scale fabrication method utilizing volumetric interference patterns generated by conformal phase masks. Despite the effectiveness of PnP processes, their design diversity has not been thoroughly explored. Here, we demonstrate that the possibility of generating any two-dimensional lattice with diverse motifs.
View Article and Find Full Text PDFWant AI Summaries of new PubMed Abstracts delivered to your In-box?
Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!