The stochastic theory of chromatography and an equilibrium based approach were used for the prediction of peak shape and retention data of anions. This attempt incorporating the potential advantages of two different chromatographic phenomena for analytical purposes. It is an integrated method to estimate kinetic and thermodynamic properties for the same chromatographic run of ions. The stochastic parameters of eluted anions, such as the residence time of the molecule on the surface of the stationary phase, and the average number of adsorption steps were determined on the basis of a retention database of organic and inorganic anions (formate, chloride, bromide, nitrate, sulphate, oxalate, phosphate) obtained by using carbonate/bicarbonate eluent system at different pHs (9-11) and concentrations (7-13 mM). In the investigated IC system the residence times are much higher and the average number of sorption steps is somewhat smaller than in RP-HPLC. The simultaneous application of the stochastic and the multispecies eluent/analyte model was utilized to peak shape simulation and the retention controlling of various anions under elution conditions of practical importance. The similarities between the measured and the calculated chromatograms indicates the predictive and simulation power of the combined application of the stochastic theory and the multiple species eluent/analyte retention model.

Download full-text PDF

Source
http://dx.doi.org/10.1016/j.chroma.2007.07.043DOI Listing

Publication Analysis

Top Keywords

peak shape
12
stochastic theory
12
retention controlling
8
shape simulation
8
average number
8
application stochastic
8
retention
5
stochastic
5
controlling peak
4
simulation anion
4

Similar Publications

Ankle push-off is important for efficient, human-like walking, and many prosthetic devices mimic push-off using motors or elastic elements. The knee is extended throughout the stance phase and begins to buckle just before push-off, with timing being crucial. However, the exact mechanisms behind this buckling are still unclear.

View Article and Find Full Text PDF

A bio-fabrication approach is a novel way to develop chitosan-stabilized magnesium oxide nanomaterials (cMgO-NMs). The process involves utilizing polymeric chitosan as the reducing and stabilizing agent. The characteristics of the developed cMgO-NMs were determined using various spectroscopical techniques.

View Article and Find Full Text PDF

The eastern equatorial Atlantic hosts a productive marine ecosystem that depends on upward supply of nitrate, the primary limiting nutrient in this region. The annual productivity peak, indicated by elevated surface chlorophyll levels, occurs in the Northern Hemisphere summer, roughly coinciding with strengthened easterly winds. For enhanced productivity in the equatorial Atlantic, nitrate-rich water must rise into the turbulent layer above the Equatorial Undercurrent.

View Article and Find Full Text PDF

Background: The storage process of Nongxiangxing daqu is closely related to the quality of the daqu. The role of storage in daqu manufacture remains unclear, and most actual production relies on previous production experience.

Results: With the extension of daqu storage over a period of time, saccharifying activity, liquefying activity, fermenting activity, and esterifying activity reached a peak when stored for 3 to 4 months.

View Article and Find Full Text PDF

Two-dimensional (2D) black arsenic phosphorus (b-AsP) material has been attracting considerable attention for its extraordinary properties. However, its application in large-scale device fabrication remains challenging due to the limited scale and irregular shape. Here, we found the special effect of Te upon growth of b-AsP and developed a novel Te-regulated steady growth (Te-SG) strategy to obtain high-quality b-AsP single crystal.

View Article and Find Full Text PDF

Want AI Summaries of new PubMed Abstracts delivered to your In-box?

Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!