There are numerous problems yet to be solved in waste management and although efforts towards waste recovery and recycling have been made, landfills are still the most common method used in the EU and many other industrialised countries. Thermal disposal, particularly incineration, is a tested and viable alternative. In 2004, only 11% of the annual waste production of Italy was incinerated. Sicily, with over five million inhabitants, is the second largest region in Italy where waste management is now a critical problem. The use of landfills can no longer be considered a satisfactory environmental solution; therefore, new methods have to be chosen and waste-to-energy plants could provide an answer. This paper gives details of municipal solid waste management in Sicily following a new Waste Management Plan. Four waste-to-energy plants will generate electricity through a steam cycle; the feedstock will become the residue after material recovery, which is calculated as 20-40% weight of the collected municipal solid waste.
Download full-text PDF |
Source |
|---|---|
| http://dx.doi.org/10.1016/j.wasman.2007.05.003 | DOI Listing |
Publication Analysis
Top Keywords
Similar Publications
Ecofriendly remediation of cadmium, lead, and zinc using dead cells of Microcystis aeruginosa.
Sci Rep
January 2025
Hydrobiology Lab, National Institute of Oceanography and Fisheries (NIOF), Cairo, Egypt.
The utilization of cyanobacteria toxin-producing blooms for metal ions adsorption has garnered significant attention over the last decade. This study investigates the efficacy of dead cells from Microcystis aeruginosa blooms, collected from agricultural drainage water reservoir, in removing of cadmium, lead, and zinc ions from aqueous solutions, and simultaneously addressing the mitigation of toxin-producing M. aeruginosa bloom.
View Article and Find Full Text PDFPolycotton waste textile recycling by sequential hydrolysis and glycolysis.
Nat Commun
January 2025
Van 't Hoff Institute for Molecular Sciences, University of Amsterdam, Amsterdam, The Netherlands.
As a result of the current high throughput of the fast fashion collections and the concomitant decrease in product lifetime, we are facing enormous amounts of textile waste. Since textiles are often a blend of multiple fibers (predominantly cotton and polyester) and contain various different components, proper waste management and recycling are challenging. Here, we describe a high-yield process for the sequential chemical recycling of cotton and polyester from mixed waste textiles.
View Article and Find Full Text PDFOptimized pure cellulose from rice straw using low alkali concentration for sustainable nanocellulose and nanohydrogel production with enhanced dye reduction.
Int J Biol Macromol
January 2025
Department of Food Technology and Nutrition, Lovely Professional University, Phagwara 144411, Punjab, India. Electronic address:
Conversion of rice straw into nanocellulose offers a sustainable approach to agricultural waste management, yielding an industrially important product with potential applications. This work focuses on effectively extracting pure cellulose from both widely used Basmati and Parmal rice straw (BRS and PRS) using less alkali concentrations (3-5 % NaOH). The process was optimized via Box Behnken design at 90-150 °C temperatures for 90-150 min, which resulted in 88.
View Article and Find Full Text PDFEstimating wastewater emissions and environmental levels of typical organic contaminants based on regionalized modelling.
Environ Res
January 2025
The Key Laboratory of Environmental Pollution Health Risk Assessment, Research Center of Emerging Contaminants, South China Institute of Environmental Sciences, Ministry of Ecology and Environment, Guangzhou 510655, P.R. China.
Organic contaminants (OCs) are released into the environment through effluent discharges from wastewater treatment plants (WWTP), posing risks to environment health. However, emissions from various source, particularly large-scale investigations across different industries, remain poorly understood. Based on both sampling and statistical data, this study estimates the emissions of 10 OCs, including perfluorooctane acid (PFOA), perfluorooctane sulfonate (PFOS), 4-nonylphenol (4-NP), 4-tert-octylphenol (4-t-OP), dibutyl phthalate (DBP), di-iso-butyl phthalate (DIBP), dimethyl phthalate (DMP), butyl benzyl phthalate (BBP), di(2-ethylhexyl) phthalate (DEHP), and bisphenol A (BPA), from the effluents of 160 factories across 8 industries, 541 municipal wastewater treatment plants (MWWTPs), and 8 waste treatment plants (WTPs) in the upper Yangtze River Basin.
View Article and Find Full Text PDFCarbon dioxide, global boiling, and climate carnage, from generation to assimilation, photocatalytic conversion to renewable fuels, and mechanism.
Sci Total Environ
January 2025
Program in Environmental and Polymer Engineering, Graduate School of INHA University, 100 Inha-ro, Michuhol-gu, Incheon 22212, Republic of Korea; Department of Environmental Engineering, INHA University, 100 Inha-ro, Michuhol-gu, Incheon 22212, Republic of Korea. Electronic address:
The increasing CO concentration in the atmosphere has substantial impacts on the global temperature. For energy sustainability and minimization of the effects of global warming, an approach to understand CO capturing and a carbon neutral culture is extremely essential in the present circumstances. The CO emission from vehicles and industries can be minimized using energy cost-effective techniques and can be converted more selectively into reusable fuels via thermochemical, electrochemical, photochemical, photocatalytic, electrocatalytic, biological and inorganic carbonate-based approaches.
View Article and Find Full Text PDFWant AI Summaries of new PubMed Abstracts delivered to your In-box?
Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!