The effects of pH, agitation speed, and dissolved oxygen tension (DOT), significant in common fungal fermentations, on the production of polygalacturonase (PG) enzyme and their relation to morphology and broth rheology were investigated using Aspergillus sojae in a batch bioreactor. All three factors were effective on the response parameters under study. An uncontrolled pH increased biomass and PG activity by 27% and 38%, respectively, compared to controlled pH (pH 6) with an average pellet size of 1.69 +/- 0.48 mm. pH did not significantly affect the broth rheology but created an impact on the pellet morphology. Similarly, at constant agitation speed the maximum biomass obtained at 500 rpm and at 30 h was 3.27 and 3.67 times more than at 200 and 350 rpm, respectively, with an average pellet size of 1.08 +/- 0.42 mm. The maximum enzyme productivity of 0.149 U mL-1 h-1 was obtained at 200 rpm with an average pellet size of 0.71 +/- 0.35 mm. Non-Newtonian and pseudoplastic broth rheology was observed at 500 rpm agitation speed, broth rheology exhibited dilatant behavior at the lower agitation rate (200 rpm), and at the medium agitation speed (350 rpm) the broth was close to Newtonian. Furthermore, a DOT range of 30-50% was essential for maximum biomass formation, whereas only 10% DOT was required for maximum PG synthesis. Non-Newtonian shear thickening behavior (n > 1.0) was depicted at DOT levels of 10% and 30%, whereas non-Newtonian shear thinning behavior (n < 1.0) was dominant at 50% DOT. The overall fermentation duration (50-70 h) was considerably shorter compared to common fungal fermentations, revealing the economic feasibility of this particular process. As a result this study not only introduced a new strain with a potential of producing a highly commercially significant enzyme but also provided certain parameters significant in the design and mathematical modeling of fungal bioprocesses.
Download full-text PDF |
Source |
---|---|
http://dx.doi.org/10.1021/bp070079c | DOI Listing |
Langmuir
January 2025
Biomedical Engineering Program, University of Colorado Boulder, Boulder, Colorado 80309, United States.
Lipid-coated oxygen microbubbles (OMBs) are being investigated for biomedical applications to alleviate hypoxia such as systemic oxygenation and image-guided radiosensitization therapy. Additionally, they hold potential for boarder application as oxygen carriers beyond the biomedical filed. Understanding the stability and oxygen release properties of OMBs in dynamic aqueous environments is critical for these applications.
View Article and Find Full Text PDFBioresour Technol
January 2025
Institute of Chemical Engineering, Bulgarian Academy of Sciences, Acad. Georgi Bontchev str., bl. 103, 1113 Sofia, Bulgaria. Electronic address:
The present study investigates the natural ability of Bacillus velezensis R22 to produce 2,3-BD from two inulin-rich substrates - insoluble and soluble chicory flour. After complex optimization of the media content and process parameters by consecutive application of Plackett-Burman design and response surface methodology, the strain R22 was capable of producing 71.2 g/L (95.
View Article and Find Full Text PDFFood Res Int
January 2025
Department of Food Engineering and Technology, Faculty of Food Engineering, Universidade Estadual de Campinas (UNICAMP), 13083-862, Campinas, Brazil. Electronic address:
This study focused on evaluating the fractionation of pequi oil and modeling the process using solid-liquid equilibrium (SLE) theory. The pequi oil was comprehensively characterized, including its fatty acid (FA) and acylglycerol (AG) profiles, moisture content, acidity, carotenoid levels, and thermal behavior. Low acidity and partial acylglycerols content, along with its TAG profile (mainly OOP, POP, OOO and PPP) and melting behavior proved that, in fact, this oil is quite suitable for fractionation.
View Article and Find Full Text PDFFoods
December 2024
Chemical Engineering Faculty, Centro de Estudios y de Investigación en Biotecnología (CIBIOT), Universidad Pontificia Bolivariana, Medellín 050031, Colombia.
This study evaluated the desorption of cadmium (Cd) from cocoa waste-derived flour using organic acids. Cocoa pods were collected from Antioquia and Casanare, Colombia, to analyze the geographical Cd content and its distribution within the pod tissues. Acid selection was performed using a multi-criteria decision-making (MCDM) matrix, and Cd desorption was assessed through a full factorial 2 experimental design, considering acid concentration, pulp density, and agitation speed.
View Article and Find Full Text PDFArch Microbiol
January 2025
Tecnológico Nacional de México, Instituto Tecnológico de Morelia, 58120, Morelia, Mexico.
The metabolites gluconic acid, 5-ketogluconic acid, proline, and glutamic acid, produced by Pseudomonas reptilivora B-6bs, are industrially important, particularly in food and pharmaceutical sectors. However, producing these metabolites involves biotin supplementation to enhance yields, which is an expensive additive, and reducing its use can significantly lower production costs. Thus, This study aimed to enhance the production of gluconic acid, 5-ketogluconic acid, proline, and glutamic acid without biotin supplementation.
View Article and Find Full Text PDFEnter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!