Diminishing fossil fuel reserves and growing concerns about global warming indicate that sustainable sources of energy are needed in the near future. For fuels to be useful in the transportation sector, they must have specific physical properties that allow for efficient distribution, storage and combustion; these properties are currently fulfilled by non-renewable petroleum-derived liquid fuels. Ethanol, the only renewable liquid fuel currently produced in large quantities, suffers from several limitations, including low energy density, high volatility, and contamination by the absorption of water from the atmosphere. Here we present a catalytic strategy for the production of 2,5-dimethylfuran from fructose (a carbohydrate obtained directly from biomass or by the isomerization of glucose) for use as a liquid transportation fuel. Compared to ethanol, 2,5-dimethylfuran has a higher energy density (by 40 per cent), a higher boiling point (by 20 K), and is not soluble in water. This catalytic strategy creates a route for transforming abundant renewable biomass resources into a liquid fuel suitable for the transportation sector, and may diminish our reliance on petroleum.
Download full-text PDF |
Source |
|---|---|
| http://dx.doi.org/10.1038/nature05923 | DOI Listing |
Publication Analysis
Top Keywords
Similar Publications
Carbon dioxide, global boiling, and climate carnage, from generation to assimilation, photocatalytic conversion to renewable fuels, and mechanism.
Sci Total Environ
January 2025
Program in Environmental and Polymer Engineering, Graduate School of INHA University, 100 Inha-ro, Michuhol-gu, Incheon 22212, Republic of Korea; Department of Environmental Engineering, INHA University, 100 Inha-ro, Michuhol-gu, Incheon 22212, Republic of Korea. Electronic address:
The increasing CO concentration in the atmosphere has substantial impacts on the global temperature. For energy sustainability and minimization of the effects of global warming, an approach to understand CO capturing and a carbon neutral culture is extremely essential in the present circumstances. The CO emission from vehicles and industries can be minimized using energy cost-effective techniques and can be converted more selectively into reusable fuels via thermochemical, electrochemical, photochemical, photocatalytic, electrocatalytic, biological and inorganic carbonate-based approaches.
View Article and Find Full Text PDFA review on the role of nanocomposites for desulfurization of liquid transportation fuels.
J Environ Manage
January 2025
University of Stuttgart, Institute of Chemical Technology, Faculty of Chemistry, D-70550 Stuttgart, Germany; South Ural State University (National Research University), Chelyabinsk, Russian Federation. Electronic address:
Stringent sulfur removal regulations from transportation fuels from typical levels of 500 ppm to ultra-low levels of 10 ppm (BS-6 standard) present a critical challenge for the crude processing industry. This research thoroughly investigates emerging desulfurization technologies, with a focus on nanocomposite (NC) materials that exhibit exceptional sulfur removal efficiency. Advanced nanocomposite catalysts, such as (TBA)PWFe@TiO@PVA, have near-complete removal rates of 96-99% for complicated sulfur compounds like dibenzothiophene (DBT) and derivatives.
View Article and Find Full Text PDFInvestigation of Biocrude Production from Spirulina via Catalytic Hydrothermal Liquefaction with the Ru/ZrO-SiO Catalyst.
ACS Omega
January 2025
School of Ecology and Environment, Renmin University of China, No.59 Zhongguancun Street, Beijing 100872, China.
Hydrothermal liquefaction (HTL) is a promising technology for converting wet biomass to liquid fuels. However, the biocrude yield and quality in this process are unsatisfactory without catalysts. Herein, a Ru/ZrO-SiO catalyst was prepared with the NaBH reducing method for the HTL of .
View Article and Find Full Text PDFWaste Heat and Habitability: Constraints from Technological Energy Consumption.
Astrobiology
January 2025
Department of Aerospace, Physics and Space Sciences, Florida Institute of Technology, Melbourne, Florida, USA.
Waste heat production represents an inevitable consequence of energy conversion as per the laws of thermodynamics. Based on this fact, by using simple theoretical models, we analyze constraints on the habitability of Earth-like terrestrial planets hosting putative technological species and technospheres characterized by persistent exponential growth of energy consumption and waste heat generation. In particular, we quantify the deleterious effects of rising surface temperature on biospheric processes and the eventual loss of liquid water.
View Article and Find Full Text PDFTandem Catalysis for Plastic Depolymerization: In Situ Hydrogen Generation via Methanol APR for Sustainable PE Hydrogenolysis.
Angew Chem Int Ed Engl
January 2025
Seoul National University of Science & Technology, Department of Chemical and Biomolecular Engineering, 232 Gongneung-ro, 01811, Seoul, KOREA, REPUBLIC OF.
Depolymerizing plastic waste through hydrogen-based processes, such as hydrogenolysis and hydrocracking, presents a promising solution for converting plastics into liquid fuels. However, conventional hydrogen production methods rely heavily on fossil fuels, exacerbating global warming. This study introduces a novel approach to plastic waste hydrogenolysis that utilizes in situ hydrogen generated via the aqueous phase reforming (APR) of methanol, a biomass-derived chemical offering a more sustainable alternative.
View Article and Find Full Text PDFWant AI Summaries of new PubMed Abstracts delivered to your In-box?
Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!