The aim of this pilot study was to evaluate the mechanical strength of an acrylic resin palatal denture base reinforced with a mesh or bundle of glass fibers. Silicon and stone casts of an edentulous maxilla (Frasaco) were used to manufacture palatal denture bases (n = 20) using heat-polymerized acrylic resin (SR Triplex Hot). The denture bases were reinforced with either 1 or 3 layers of glass-fiber mesh (Stick Net) or with a bundle of unidirectional glass fibers (Stick). Denture bases without reinforcement served as the control group. Fracture tests were carried out on a universal testing machine to determine each material's mechanical strength. The highest mean fracture values of 919 N were obtained in samples with 3 layers of Stick Net, with mean values of 677 N in the control samples. The differences between these 2 groups were statistically significant (P < .05). The applied glass-fiber reinforcement increased the mechanical strength of the acrylic resin palatal denture bases.
Download full-text PDF |
Source |
|---|
Publication Analysis
Top Keywords
Similar Publications
Enhancing biofuel pellet quality using torrefaction and co-pelletization of palm kernel shell and empty fruit bunch.
Environ Sci Pollut Res Int
January 2025
Faculty of Chemical & Process Engineering Technology, Universiti Malaysia Pahang Al-Sultan Abdullah, Lebuh Persiaran Tun Khalil Yaakob, 26300, Kuantan, Pahang, Malaysia.
Palm kernel shell (PKS) and empty fruit bunch (EFB) are potential biomass resources for producing solid biofuel for energy applications. However, raw EFB and PKS are not uniform in size and pose rotting behavior. Torrefaction and co-pelletization are both effective methods to improve their combustion and mechanical characteristics.
View Article and Find Full Text PDFUsing Industrial Mining Solid Waste through Conversion to Phase-Change Materials for Thermal Energy Storage.
Chempluschem
January 2025
China University of Mining and Technology, School of electrical and power engineering, NO.1, Daxue Road, 221116, Xuzhou, CHINA.
The mining industry produces a large amount of industrial solid waste every year. Among them, fly ash (FA), slag and tailings are the three main solid wastes, which can cause soil pollution, air pollution, water pollution and serious threat to human health if not handled properly. At present, the treatment methods of industrial solid waste mainly include direct landfill, recovery of high-value components, production of construction materials, etc.
View Article and Find Full Text PDFEffects of rapid infrared radiation heating on the warping deformation and mechanical properties of selective laser melted Co-Cr dental alloy.
J Prosthet Dent
January 2025
Undergraduate student, School of Mechanical Engineering, Shandong University of Technology, Zibo, PR China.
Statement Of Problem: Infrared radiation heating (IRH) technology has been innovatively applied to the annealing of selective laser melted (SLM) cobalt chromium (Co-Cr) frameworks. However, previous studies have not reported the effects of IRH on the warping deformation and mechanical properties of these frameworks.
Purpose: The purpose of this in vitro study was to investigate the effects of IRH on the warping deformation and mechanical properties of dental SLM Co-Cr alloy and to evaluate its potential applications in dental restorations.
Experimental bilayer zirconia systems after aging: Mechanical, optical, and microstructural characterization.
Dent Mater
January 2025
Department of Prosthodontics and Periodontology, Bauru School of Dentistry, University of São Paulo, Bauru, SP 17012-901, Brazil.
Objectives: To characterize two experimental zirconia bilayer materials compared to their monolithic controls, before and after hydrothermal aging.
Methods: Commercial zirconia powders were utilized to fabricate two bilayer materials: 3Y-TZP+ 5Y-PSZ (3Y+5Y/BI) and 4Y-PSZ+ 5Y-PSZ (4Y+5Y/BI), alongside control groups 3Y-TZP (3Y/C), 4Y-PSZ (4Y/C), and 5Y-PSZ (5Y/C). Compacted specimens were sintered (1550 °C- 2 h, 3 °C/min), and half of them underwent hydrothermal aging (134 °C-20h, 2.
Yam starch-based sustainable edible films loaded with bioactive components from aroeira leaf extract: Mechanical, physical, and antioxidant properties.
Int J Biol Macromol
January 2025
Graduate Program in Food Science and Technology, Federal University of Paraíba, 58051-900 João Pessoa, Paraíba, Brazil. Electronic address:
This study aimed to investigate the impact of adding aroeira leaf extract (Schinus terebinthifolius Raddi) to a yam starch film matrix, focusing on the development of potentially active films and the evaluation of their physicochemical, mechanical, optical, and antioxidant properties. Films were produced using the casting method with varying extract concentrations (0, 3, 6, 12, and 15 %), yam starch (2 %), and glycerol (1 %). The antioxidant properties were analyzed by determining the total phenolic content, 2,2-Diphenyl-1-Picrylhydrazyl (DPPH) radical scavenging, ferric reducing power, and 2,2-azinobis (3-ethylbenzothiazoline-6-sulfonic acid) (ABTS) radical elimination, which revealed a significant increase in antioxidant properties as the extract concentration increased.
View Article and Find Full Text PDFWant AI Summaries of new PubMed Abstracts delivered to your In-box?
Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!