Dynamic characteristics of a magnetically levitated impeller in a centrifugal blood pump.

Centrifugal blood pumps that employ hybrid active/passive magnetic bearings to support noncontact impellers have been developed in order to reduce bearing wear, pump size, the power consumption of the active magnetic bearing, and blood trauma. However, estimates made at the design stage of the vibration of the impeller in the direction of passive suspension during pump operation were inaccurate, because the influence of both the pumping fluid and the rotation of the impeller on the dynamic characteristics was not fully recognized. The purpose of this study is to investigate the dynamic characteristics in a fluid of a magnetically levitated rotating impeller by measuring both the frequency response to sinusoidal excitation of the housing over a wide frequency range and the displacement due to input of a pulsatile flow during left ventricular (LV) assist. The excitation tests were conducted under conditions in which the impeller was levitated in either air or water, and with or without rotation. The experimental and analytical results indicate that vibration of the impeller due to the external force in water was decreased, compared with that in air due to the hydraulic force of water. The axial resonant frequency rose quadratically with rotational speed, and the tilt mode had two resonant frequencies while rotating due to the gyroscopic effect. With the pump inserted into a mock systemic circulatory loop, the dynamic stability of the impeller when pulsatile pressure was applied during LV assist was verified experimentally. The amplitudes of vibration in response to the pulsatile flow in the passively constrained directions were considerably smaller in size than the dimensions of initial gaps between the impeller and the pump housing.