The effect of hydrostatic pressure on chemical reactions induced by 20 kHz ultrasound has been studied using three different methods: the oxidation of potassium iodide, bubble cloud visualization studies, and sound attenuation measurements. The latter two have demonstrated that shielding of the ultrasonic wave is less pronounced at elevated pressures. Accordingly, the yield of iodine liberation increases with increasing pressure. At high static pressures, however, the less efficient cavitation dynamics dominate and the chemical reactivity decreases rapidly.
Download full-text PDF |
Source |
|---|---|
| http://dx.doi.org/10.1021/jp070635l | DOI Listing |
Publication Analysis
Top Keywords
Similar Publications
Raman spectroscopic investigation of phase changes and reactivity of 1-pentadecene under high-pressure and high-temperature conditions.
Spectrochim Acta A Mol Biomol Spectrosc
March 2025
Faculty of Science, Hokkaido University, N10 W8, Kita-ku, Sapporo, Hokkaido 060-0810, Japan.
The phase changes and reactivity of 1-pentadecene (CH) were investigated using Raman spectroscopy under high-pressure and high-temperature conditions using diamond anvil cells. At room temperature, the phase changes from liquid phase to solid phase I, and solid phase I to solid phase II were observed at 0.3 GPa and 4.
View Article and Find Full Text PDFExternal negative pressure transiently reduces intravenous pressure and augments the arteriovenous pressure gradient in the affected limb segment.
PLoS One
December 2024
Faculty of Medicine, University of Oslo, Oslo, Norway.
Recently intermittent negative pressure has emerged as a potential treatment in vascular disease and has similarities with established experimental interventions such as lower body negative pressure. The direct, local influences of either method upon intravascular pressure still require some clarification however, particularly in the immediate moments following onset. We investigated the acute intravascular pressure responses to intermittent cycles of negative pressure in the supine and sitting postures.
View Article and Find Full Text PDFEnhanced UV Light Responsivity in <110>-Oriented 2D Perovskites Realized by Pressure-Induced Ultrafast Exciton Transport.
Angew Chem Int Ed Engl
October 2024
State Key Laboratory of Molecular Reaction Dynamics, Dalian Institute of Chemical Physics, Chinese Academy of Sciences, Dalian, 116023, China.
Two-dimensional (2D) <100>-oriented perovskites exhibit superior optoelectronic properties, offering significant potential in photovoltaic, light-emitting, and photodetection applications. Nevertheless, their enlarged interlayer spacing restricts longitudinal carrier transport, thereby limiting its potential applications. While <110>-oriented 2D perovskites provide a prospective solution with their compact interlayer spacing, their inherent structure, characterized by octahedra tilting, indirectly hinders carrier transport due to the generation of self-trapped excitons (STEs) caused by strong electron-phonon coupling.
View Article and Find Full Text PDFInvestigation of the Reduction in Distributed Acoustic Sensing Signal Due to Perforation Erosion by Using CFD Acoustic Simulation and Lighthill's Acoustic Power Law.
Sensors (Basel)
September 2024
Petroleum Engineering Department, Texas A&M University, College Station, TX 77843, USA.
Article Synopsis
- Distributed Acoustic Sensing (DAS) is used for monitoring sound from perforation holes during hydraulic fracturing, and it can help estimate perforation erosion caused by proppant injection.
- The research employed a Computational Fluid Dynamics (CFD) acoustic simulator to examine the acoustic response of fluid flow through perforations of varying sizes and established a linear relationship between sound pressure levels and flow rates.
- The findings indicate that as the perforation diameter increases, the DAS signal decreases, providing crucial insights for fracture design and evaluating perforation diameter growth during hydraulic treatment.
Pressure-Induced Molding of Black Phosphorus@TiCT Composite Electrode and Its Implications on the Lithium Storage.
ACS Appl Mater Interfaces
October 2024
Key Laboratory of Functional Materials Physics and Chemistry (Ministry of Education), College of Physics, Jilin Normal University, Changchun 130103, China.
For the first time, an innovative pressure quenching technique is used to create the integrated electrode of the black phosphorus (BP) @TiCT composite material, doing away with the requirement for adhesive additives and simplifying time-consuming processes. Through the formation of Ti-O-P bonds with BP, TiCT MXenes can function as conductive additives and affect the interlayer gap. Additionally, we have found that there is a critical synthetic pressure threshold (300 kN) at which the performance of BP@TiCT-integrated electrodes can be improved: too high of a pressure prevents lithium-ion transport because of mesopore reduction; too low of a pressure prevents Ti-O-P chemical bond formation between the two components; and suboptimal pressure does not allow for density enhancement for better electron conduction.
View Article and Find Full Text PDFWant AI Summaries of new PubMed Abstracts delivered to your In-box?
Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!