Ultrasound induced formation of paraffin emulsion droplets as template for the preparation of porous zirconia.

The paraffin particles were prepared by quenching process after sonicating the solution of paraffin and water at 80 degrees C. The resultant paraffin particles were then used as template for the preparation of macroporous zirconia materials. For this, zirconium normal butoxide (ZNB) modified with triethanolamine (TEA) was first hydrolyzed by water containing the dispersed paraffin particles with the surfactant, Sodium di(2-ethylhexyl) sulfosuccinate. This resulted in the formation of a slurry consisting of hydrolyzed sol and paraffin particles. After centrifugation, a cake packed with hydrated sol and paraffin particles were obtained which was then subjected to heat treatment. The sample obtained after heat treatment contained finely dispersed pores in the size range from 40 nm to 2 microm. Moreover, using the present approach it has also been observed that, change in pore size of zirconia wall is possible with a change in size of the paraffin particles. Thus, the present approach is a novel way of producing porous materials as the particle size of the template could be changed and templates become hard when they were molded as compared to the conventional methods in which there is no change in phase for the templates under 100 degrees C.