We present a high-capacity ultrafast all-optical time demultiplexer that can be employed to retrieve 40 gigabits/second (Gb/s) base-rate channels from a 640 Gb/s single-polarized signal. The demultiplexer utilizes ultrafast effects of filtered chirp of a semiconductor optical amplifier. Excellent demultiplexing performance is shown at very low switching powers: +8 dBm (640 Gb/s data) and -14 dBm (40 GHz clock). The demultiplexer has a simple structure and, in principle, allows monolithic integration.
Download full-text PDF |
Source |
---|---|
http://dx.doi.org/10.1364/ol.32.000835 | DOI Listing |
Sensors (Basel)
December 2024
Department of Mechanical Engineering, National Taiwan University, No. 1, Sec. 4, Roosevelt Road, Taipei 10617, Taiwan.
Adhesive joining has the severe limitation that damages/defects developed in the bondline are difficult to assess. Conventional non-destructive examination (NDE) techniques are adequate to reveal disbonding defects in fabrication and delamination near the end of service life but are not helpful in detecting and monitoring in-service degradation of the joint. Several techniques suitable for long-term joint integrity monitoring are proposed.
View Article and Find Full Text PDFVital signs such as heart rate (HR) and respiration rate (RR) are essential physiological parameters that are routinely used to monitor human health and bodily functions. They can be continuously monitored through contact or contactless measurements performed in the home or a hospital. In this study, a contactless Doppler radar W-band sensing system was used for short-range, contactless vital sign estimation.
View Article and Find Full Text PDFSensors (Basel)
November 2024
Department of Civil Engineering and Architecture, Tallinn University of Technology, 19086 Tallinn, Estonia.
Detecting defects in plates is crucial across various industries due to safety risks. While ultrasonic bulk waves offer point-by-point inspections, they are time-consuming and limited in coverage. In contrast, guided waves enable the rapid inspection of larger areas.
View Article and Find Full Text PDFThe optical single sideband (SSB) transmitter based on dual modulation of an electro-absorption modulation laser (D-EML) has attracted considerable attention for its capability of monolithic integration and high output power. A model-based modulation method has been developed recently for generating high-quality optical SSB signals with this D-EML scheme. However, this method requires accurate characterization of the EML's chirps and pre-compensation for frequency responses of all-optical/electrical components, as well as the path difference between two driving signals.
View Article and Find Full Text PDFThe linear frequency swept light source is a critical device for several sensing applications, including FMCW LiDAR, with which the maximum sensing distance is determined by the coherence length of the light source and the spatial resolution is limited by the frequency scan nonlinearity. Here, we report what we believe to be a novel approach to generate highly coherent optical linear frequency sweeps (LFS) with a Fourier domain mode-locked (FDML) opto-electronic oscillator (OEO) deploying carrier suppressed single sideband (CS-SSB) modulation enabled by a dual-parallel Mach-Zehnder modulator (DP-MZM), with the coherence length determined by the fixed frequency laser used in the OEO, without the need of an expensive high-speed arbitrary waveform generator (AWG). Concurrently, a radio frequency (RF) LFS synchronized with the optical LFS is also generated with the FDML OEO.
View Article and Find Full Text PDFEnter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!