Purpose: To develop a laboratory model aimed at duplicating the failure process of post and core restorations. The load pattern applied was to be repetitive (fatigue) and multivectorial. To determine and compare the resistance under fatigue loading of seven endodontic post/natural root combinations: stainless steel-, titanium-, ceramic-, composite-fiber/epoxy-, two glass-fiber/epoxy- and glass-fiber/acrylic posts.
Materials And Methods: The repetitive, alternating and multivectorial intraoral force pattern was reproduced by subjecting the specimens to the rotating cantilever beam test. To this end, the samples were designed as rotation-symmetric structures comprising a root, a post, periodontal ligament- and bone analogs and a restoration analog. The following posts were tested: Unimetric-Ti, Unimetric-SS, Biopost, Composipost, Easypost, DT Lightpost, Everstickpost. The samples were spun around their long axes while being clamped into a revolving collet on one end and loaded normal to their long axis on the other end. The aim was to determine the load level at which 50% of the specimens survived- and 50% fractured before 10E6 cycles. The 50% means were determined using the staircase procedure.
Results: In increasing order of magnitude, the resistances to fatigue loading were as follows: Biopost, Unimetric-Ti, Unimetric-SS, Composipost, Easypost, Everstickpost, DT Lightpost.
Significance: The fatigue resistance of the two fibrous posts with the highest fatigue resistance was twice that of any of the ceramic or metal posts.
Download full-text PDF |
Source |
|---|---|
| http://dx.doi.org/10.1016/j.dental.2006.12.001 | DOI Listing |
Publication Analysis
Top Keywords
Similar Publications
Comparison of Bicortical Headless Cannulated Screw Fixations, Tension Band Fixations, and Kirschner Wire Fixations of a Jones Fracture: A Biomechanical Study.
J Am Podiatr Med Assoc
January 2025
‡Canakkale Onsekiz Mart University Medical Faculty, Department of Orthopedics and Traumatology, Çanakkale, Turkey.
Background: The aim of study was to biomechanically compare the fixation of Jones fracture using headless cannulated screw, tension band, and two Kirschner wires.
Methods: A total of 60 fourth-generation, fifth metatarsal synthetic bone models were divided into three groups according to the fixation techniques. A vertical load, oriented from plantar to dorsal and lateral to medial, was applied to the metatarsal specimen that were potted with molding material.
Polyurethane-grafted graphene oxide from repurposed foam mattress waste.
RSC Adv
January 2025
Department of Chemistry, Carnegie Mellon University 4400 Fifth Avenue Pittsburgh PA 15213 USA
Polyurethanes (PU) make up a large portion of commodity plastics appearing in applications including insulation, footwear, and memory foam mattresses. Unfortunately, as thermoset polymers, polyurethanes lack a clear path for recycling and repurposing, creating a sustainability issue. Herein, using dynamic depolymerization, we demonstrate a simple one-pot synthesis for preparation of an upcycled polyurethane grafted graphene material (PU-GO).
View Article and Find Full Text PDFPrognostics of the knee osteoarthritis induced by cyclic loading activities. A model-based analysis.
Comput Methods Biomech Biomed Engin
January 2025
College of Engineering and Technology, American University of the Middle East, Egaila, Kuwait.
Repetitive mechanical stresses on the knee joint during daily activities accumulate fatigue damage in the articular cartilage (AC), leading to wear and knee osteoarthritis (KOA). Effective treatments remain limited, underscoring the need for predictive approaches to identify KOA early. This study proposes a mathematical model to estimate AC degradation under cyclic loading from walking.
View Article and Find Full Text PDFOptimized Photochromic Performance of Spiropyran through Incorporation into Hydrogen-Bonded Organic Frameworks and Applications in Anticounterfeiting and Information Encryption.
ACS Appl Mater Interfaces
January 2025
School of Materials Science and Engineering, Zhejiang Sci-Tech University, Hangzhou 310018, China.
Photostimulus-responsive fluorescent materials are promising for anticounterfeiting and UV printing due to rapid response and simple preparation. In this paper, we propose a novel strategy to prepare photostimulus-responsive materials SP@HOF-olefin by integrating the photochromic molecule spiropyran (SP) with postsynthetic modified hydrogen-bonded organic frameworks (HOF-olefin). Compared to SP@HOF, the composites SP@HOF-olefin exhibit enhanced photochromic properties, such as a fast response speed, pronounced color contrast, and exceptional fatigue resistance.
View Article and Find Full Text PDFCharacterization of Fatigue Properties of Fiber-Reinforced Polymer Composites Based on a Multiscale Approach.
Polymers (Basel)
January 2025
Department of Mechanical Engineering, Hanyang University, 222 Wangsimri-ro, Seongdong-gu, Seoul 04763, Republic of Korea.
This study presents a methodology for characterizing the constituent properties of composite materials by back-calculating from the laminate behavior under fatigue loading. Composite materials consist of fiber reinforcements and a polymer matrix, with the fatigue performance of the laminate governed by the interaction between these constituents. Due to the challenges in directly measuring the properties of individual fibers and the polymer matrix, a reverse-engineering approach was employed.
View Article and Find Full Text PDFWant AI Summaries of new PubMed Abstracts delivered to your In-box?
Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!