Vertically aligned carbon-nanotube (CNT) arrays were fabricated in the thin-film anodic aluminum oxide (AAO) templates on silicon wafers utilizing a niobium (Nb) thin film as the source electrode. The average diameter of the CNTs was 25 nm, and the number density was 3 x 10(10) cm(-2). The CNT arrays synthesized at 700 degrees C and above exhibited Schottky behavior even at 300 K, with energy gaps between 0.2 eV and 0.3 eV. However, individual CNTs obtained by removal of the template behaved as resistors at 300 K. The CNT/Nb oxide/Nb junction is thought to be responsible for the Schottky behavior. This structure can be a useful cornerstone in the fabrication of nanotransistors operating at room temperature.
Download full-text PDF |
Source |
|---|---|
| http://dx.doi.org/10.1002/smll.200400114 | DOI Listing |
Publication Analysis
Top Keywords
Similar Publications
Trench MOS Schottky Diodes: A Physics-Based Analytical Model Approach to Charge Sharing.
Micromachines (Basel)
January 2025
Power Solutions Group, Onsemi, Scottsdale, AZ 85250, USA.
Trench MOS Barrier Schottky (TMBS) rectifiers offer superior static and dynamic electrical characteristics when compared with planar Schottky rectifiers for a given active die size. The unique structure of TMBS devices allows for efficient manipulation of the electric field, enabling higher doping concentrations in the drift region and thus achieving a lower forward voltage drop (VF) and reduced leakage current (IR) while maintaining high breakdown voltage (BV). While the use of trenches to push electric fields away from the mesa surface is a widely employed concept for vertical power devices, a significant gap exists in the analytical modeling of this effect, with most prior studies relying heavily on computationally intensive numerical simulations.
View Article and Find Full Text PDFAn electrically conductive dinuclear aluminium complex for the fabrication of a Schottky diode.
RSC Adv
January 2025
Department of Chemical and Pharmaceutical Sciences, University of Trieste Via L. Giorgieri 1 Trieste 34127 Italy
Electrical performances of a biphenyl-derived amido Schiff base ligand L and its dinuclear Al(iii) complex (complex 1) were investigated in a metal-semiconductor (MS) junction. Electrical studies revealed that complex 1 significantly enhanced the electrical conductivity and improved the characteristics of a Schottky barrier diode (SBD). The - characteristics demonstrated that complexation of ligand L with Al(iii) ion increased the conductivity by two orders of magnitude (conductivity of L = 1.
View Article and Find Full Text PDFExploring Moiré Superlattices and Memristive Switching in Non-van der Waals Twisted Bilayer BiOSe.
ACS Appl Mater Interfaces
January 2025
Department of Physics, Indian Institute of Technology Guwahati, Guwahati 781039, India.
The discovery of moiré physics in two-dimensional (2D) materials has opened new avenues for exploring unique physical and chemical properties induced by intralayer/interlayer interactions. This study reports the experimental observation of moiré patterns in 2D bismuth oxyselenide (BiOSe) nanosheets grown through one-pot chemical reaction methods and a sonication-assisted layer separations technique. Our findings demonstrate that these moiré patterns result from the angular stacking of the nanosheets at various twist angles, leading to the formation of moiré superlattices (MSLs) with distinct periodicities.
View Article and Find Full Text PDF2D metallic transition metal dichalcogenides: promising contact metals for 2D GaN-based (opto)electronic devices.
Phys Chem Chem Phys
January 2025
Jiangxi Provincial Key Laboratory of Advanced Electronic Materials and Devices, Jiangxi Science & Technology Normal University, Nanchang 330018, China.
Owing to their high light absorption coefficient, excellent electronic mobility, and enhanced excitonic effect, two-dimensional (2D) GaN materials hold great potential for applications in optoelectronic and electronic devices. As the metal-semiconductor junction (MSJ) is a fundamental component of semiconductor-based devices, identifying a suitable metal for contacting semiconductors is essential. In this work, detailed first-principles calculations were performed to investigate the contact behavior between the GaN monolayer (ML) and a series of 2D metals MX (M = Nb, Ta, V, Mo, or W; X = S or Se).
View Article and Find Full Text PDF"Nano-In-Nano" Schottky Diodes Fabricated by Combining Self-Aligned Nanogap Patterning with Bottom-Up ZnO Nanowire Growth.
ACS Appl Electron Mater
January 2025
Electrical Engineering Division, Engineering Department, University of Cambridge, Cambridge CB3 0FA, U.K.
Nanoscale semiconductors offer significant advantages over their bulk semiconductor equivalents for electronic devices as a result of the ability to geometrically tune electronic properties, the absence of internal grain boundaries, and the very low absolute number of defects that are present in such small volumes of material. However, these advantages can only be realized if reliable contacts can be made to the nanoscale semiconductor using a scalable, low-cost process. Although there are many low-cost "bottom-up" techniques for directly growing nanomaterials, the fabrication of contacts at the nanoscale usually requires expensive and slow techniques like e-beam lithography that are also hard to scale to a level of throughput that is required for commercialization.
View Article and Find Full Text PDFWant AI Summaries of new PubMed Abstracts delivered to your In-box?
Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!