We report on rapid in situ analysis of liquid metal melts under reduced ambient pressure by laser-induced breakdown spectroscopy (LIBS) using a transportable system. LIBS denotes a method in which characteristic optical emission line intensities of excited species in laser-generated plasma plumes are used for a quantitative chemical analysis of target materials. It is a fast, noncontact method that can be carried out under various atmospheric conditions, allowing large working distances between the sample under investigation and the detection system. For these reasons, LIBS is applicable in particular for process control in metallurgy under reduced ambient pressure. This was demonstrated for two types of vacuum devices under production conditions at a steel mill. The results of these experiments, including calibration curves for Cr, Ni, and Mg in liquid steel, are presented. The influence of variations in the ambient pressure on the results of the LIBS analysis is discussed within the frame of a generalized shock-wave model for the expansion of the laser-induced plasma plume.
Download full-text PDF |
Source |
|---|---|
| http://dx.doi.org/10.1366/000370204773580310 | DOI Listing |
Publication Analysis
Top Keywords
Similar Publications
Enhancing Patient-Centric Drug Development: Coupling Hot Melt Extrusion with Fused Deposition Modeling and Pressure-Assisted Microsyringe Additive Manufacturing Platforms with Quality by Design.
Pharmaceutics
December 2024
Drug Product Development, Continuus Pharmaceuticals, Woburn, MA 01801, USA.
In recent years, with the increasing patient population, the need for complex and patient-centric medications has increased enormously. Traditional manufacturing techniques such as direct blending, high shear granulation, and dry granulation can be used to develop simple solid oral medications. However, it is well known that "one size fits all" is not true for pharmaceutical medicines.
View Article and Find Full Text PDFStable Reusability of Nanocellulose Aerogels with Amino Group Modification in Adsorption/Desorption Cycles for CO Capture.
Materials (Basel)
January 2025
Departamento de Química Ambiental, Universidad Católica de la Santísima Concepción, Concepción 4070129, Chile.
This study evaluated the stability and reusability of amino-functionalized nanocellulose aerogels as CO-adsorbent materials. The modified aerogels, synthesized via a controlled silylation using N-[3-(trimethoxysilyl) propyl] ethylenediamine (DAMO), demonstrated excellent thermal stability up to 250 °C (TGA) and efficient CO adsorption through chemisorption, which was the main adsorption mechanism. The performance of the aerogels was assessed using both adsorption isotherms and the decay pressure technique, revealing that CO adsorption capacity increased with higher amino group loading (4.
View Article and Find Full Text PDFLaminated Two-Terminal All-Perovskite Tandem Solar Cells with Transparent Conductive Adhesives.
ACS Appl Mater Interfaces
January 2025
Institute of Microstructure Technology (IMT), Karlsruhe Institute of Technology (KIT), Hermann-von-Helmholtz-Platz 1, Eggenstein-Leopoldshafen 76344, Germany.
Established sequential deposition of multilayer two-terminal (2T) all-perovskite tandem solar cells possesses challenges for fabrication and limits the choice of materials and device architecture. In response, this work represents a lamination process based on a transparent and conductive adhesive that interconnects the wide-bandgap (WBG) perovskite top solar cell and the narrow-bandgap (NBG) perovskite bottom solar cell in a monolithic 2T all-perovskite tandem solar cell. The transparent conductive adhesive (TCA) layer combines Ag-coated poly(methyl methacrylate) microspheres with an optical adhesive.
View Article and Find Full Text PDFControlling the stability of monodisperse phospholipid-coated microbubbles by tuning their buckling pressure.
J Colloid Interface Sci
January 2025
BIOS/Lab on a Chip Group, Max Planck Center Twente for Complex Fluid Dynamics, MESA+ Institute for Nanotechnology, Faculty of Electrical Engineering, Mathematics and Computer Science, University of Twente, P.O. Box 217, Enschede, 7500 AE, the Netherlands. Electronic address:
Hypothesis: Monodisperse phospholipid-coated microbubbles, with a size and resonance frequency tuned to the ultrasound driving frequency, have strong potential to enhance sensitivity, efficiency, and control in emerging diagnostic and therapeutic applications involving bubbles and ultrasound. A key requirement is that they retain their gas volume and shell material during physiologic pressure changes and withstand the overpressure during intravenous injection. The shell typically comprises a mixture of a phospholipid (e.
View Article and Find Full Text PDFAssociation between joint exposure to ambient air pollutants and carotid plaque: The mediating role of cardiometabolic risk factors.
Ecotoxicol Environ Saf
January 2025
Beijing Municipal Key Laboratory of Clinical Epidemiology, Department of Epidemiology and Health Statistics, School of Public Health, Capital Medical University, Beijing, China; Harvard T.H. Chan School of Public Health, 655 Huntington Ave, Boston, MA 02115, USA. Electronic address:
Background: Research has shown that exposure to joint air pollution is related to atherosclerosis, but little evidence has been found for carotid plaques. Our objective is to assess the association between exposure to joint air pollutants and carotid plaque and explore the mediating role of cardiometabolic factors in this relationship.
Methods: The Beijing Health Management Cohort (BMHC) study followed participants recruited from 2013 to 2014 until December 31, 2020.
Want AI Summaries of new PubMed Abstracts delivered to your In-box?
Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!