Electrochemistry of TEMPO in the aqueous liquid/vapor interfacial region: measurements of the lateral mobility and kinetics of surface partitioning.

A new method is described to simultaneously determine the kinetics of surface partitioning and the lateral diffusion constant of redox active amphiphiles. It concerns water-soluble amphiphiles for which the surface adsorption equilibrium constant and the solution diffusion constant are measured independently. The method involves cyclic voltammetric experiments carried out at the air/water interface with microband electrodes aligned with the plane of the water surface. Typically, 100 nm wide, 1.0 cm long microband electrodes are fabricated by the vacuum vapor deposition of gold films on glass. The front face of the electrode substrates are coated with impermeable, dimensionally stable, polymer barrier films with thickness L in the range of approximately 0.1-1.0 microm. Fracturing such gold-coated glass substrates exposes gold microbands. The recorded voltammetric current sensitively depends on the barrier film thickness, the surfactant surface diffusion constant, Dsurf, and its rate constant of desorption, kdes. For a given surfactant, such as the nitroxyl piperidine free radical TEMPO featured in this report, large currents are observed with microband electrodes that do not carry a barrier film (L = 0). This is because the surfactant surface population diffusing along the air/water interface can be directly electro-oxidized at the edge of the microband. Smaller currents are measured in the presence of a barrier film, since, in those instances, the surface population may contribute to the voltammetric current only via a mechanism involving surfactant desorption from the water surface into bulk, where it contributes to the three-dimensional solution diffusion processes. The quantitative interpretation of the voltammetric experiments was made possible with finite element simulations with FEMLAB. These produce a set of calibration curves, Dsurf versus log kdes, for each value of the barrier film thickness. The intersection of the calibration curves determines the unique values of Dsurf and kdes. For TEMPO, Dsurf = 4.4 +/- 1.2 x 10(-5) cm2/s and kdes >/= 2 x 10(4) s(-1). Surfactant desorption rate constants of this magnitude have not been previously experimentally accessible. Since, in our earlier report (Wu, D. G.; Malec, A. D.; Head-Gordon, M.; Majda, M. J. Am. Chem. Soc. 2005, 27, 4490-4496), we showed that TEMPO is not immersed in water and that it diffuses along the interface hydrogen-bonded to just one or two water molecules, its Dsurf value approximates the water diffusion constant in the aqueous liquid-vapor interfacial region.