In this study, the removal of methylene blue (MB) from aqueous solution by peat was analyzed. The peat was collected from a peatland at Arroio do Silva Beach, in Santa Catarina state, in the south of Brazil. Adsorption was conducted using varied initial concentrations of the MB solutions and three different temperatures (35, 45 and 60 degrees C). An adsorption time of around 4.5h was sufficient to reach the equilibrium for all temperatures, in the concentration range studied. Percentage removal was greater for diluted solutions, but the absolute amount of MB adsorbed by the peat at equilibrium increased with an increase of the initial concentration, corroborating the efficacy of the material as an adsorbent. Temperature influenced slightly the reaction, which was endothermic. Results indicated a multi-layered process and the data were analyzed considering pseudo-first-order, pseudo-second-order and intraparticle diffusion approaches. The latter two mechanisms seem to be significant in the rate-controlling step.
Download full-text PDF |
Source |
|---|---|
| http://dx.doi.org/10.1016/j.jhazmat.2006.10.053 | DOI Listing |
Publication Analysis
Top Keywords
Similar Publications
A chemically modified DNAzyme-based electrochemical sensor for binary and highly sensitive detection of reactive oxygen species.
Chem Sci
January 2025
School of Chemistry and Materials Science, Jiangsu Normal University Xuzhou 221116 China
Reactive oxygen species (ROS) play a critical role in regulating various physiological processes. To gain a comprehensive understanding of their distinct functions in different physiological events, it is imperative to detect binary ROS simultaneously. However, the development of the sensing method capable of binary ROS detection remains a significant challenge.
View Article and Find Full Text PDFEfficient Phytoremediation of Methyl Red and Methylene Blue Dyes from Aqueous Solutions by .
ACS Omega
January 2025
Department of Chemistry, University at Albany - State University of New York (SUNY), 1400 Washington Avenue, Albany, New York 12222, United States.
The contamination of water with dyes stemming from the discharge of industrial waste poses significant environmental risks and health concerns. In this study, the phytoremediation potential of the wetland plant was investigated (as a function of plant biomass, pH, contact time, and initial dye concentration) for the removal of methylene blue and methyl red dyes from wastewater. The experimental adsorption capacities under the optimum conditions were found to be 1.
View Article and Find Full Text PDFAll-in-one photothermal/catalytic flexible membrane for highly efficient desalination and organic pollutant degradation.
Nanoscale
January 2025
College of Chemical Engineering, State Key Laboratory of Chemical Resource Engineering, Beijing University of Chemical Technology, Beijing 100029, China.
Interfacial solar vapor generation (ISVG) accompanied by photocatalytic degradation holds immense potential to mitigate water scarcity and pollution. Distinct from the two detached functional components (photothermal agent and photocatalyst) in a conventional evaporator, in this study, an all-in-one photothermal/catalytic agent, nitrogen-containing honeycomb carbon nanosheets (NHC), was engineered for synergistic high-efficiency steam generation and photocatalysis functions. It was demonstrated that the superoxide radical generated on the surface of NHC conferred its catalytic activity to the photodegradation of organic pollutants under full solar spectrum irradiation.
View Article and Find Full Text PDFMagnesium-doped lithium manganese oxide composite with mesoporous silica for methylene blue dye and heavy metal removal.
Anal Methods
January 2025
CSIR-Central Salt and Marine Chemicals Research Institute (CSIR-CSMCRI), G. B. Marg, Bhavnagar, 364 002, India.
In this study, magnesium-doped lithium manganese oxide nanoparticles were prepared through a solid-state reaction technique, and their surface was modified with mesoporous silica. The surface-modified material exhibited a significantly enhanced BET surface area from 5.791 to 66.
View Article and Find Full Text PDFSynergizing Monte Carlo simulations and experimental insights for efficient cationic dye removal using natural fluorapatite.
J Mol Model
January 2025
Processes, Materials and Environment Laboratory (LPME), Faculty of Sciences and Technology of Fez, Sidi Mohamed Ben Abdellah University, B.P. 2202, Fez, Morocco.
Context: Natural fluorapatite (FAP) has been investigated as an adsorbent for the removal of dyes such as methylene blue (MB) and crystal violet (CV) from aqueous solutions. Effective dye removal is crucial for water treatment, particularly for industrial wastewater containing toxic dyes. FAP, a naturally abundant material, was characterized using XRD, FTIR, and SEM analysis.
View Article and Find Full Text PDFWant AI Summaries of new PubMed Abstracts delivered to your In-box?
Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!