A new process for the remediation of soil contaminated with hydrocarbons is proposed. The innovation consists on coupling an advanced oxidative method, using a Fenton-type catalyst, with the application of ultrasonic energy. The use of ultrasonic energy not only assists the desorption of the contaminants from the soil, but also promotes the formation of OH radicals, which are the oxidant agents involved in the oxidation process. Different Fenton-like catalysts were employed in the present study; however, the highest removal of toluene and xylenes were obtained with iron sulfate and copper sulfate, respectively. Also, hydrogen peroxide was tested at different concentrations, and it was found that increasing its concentration enhanced the removal of all the contaminants. Finally, it was demonstrated that applying ultrasonic energy to the reacting system process noticeably enhanced the global efficiency of the process due to a synergistic effect in conjunction with the hydrogen peroxide concentration and type of catalyst.
Download full-text PDF |
Source |
|---|---|
| http://dx.doi.org/10.1016/j.jhazmat.2006.09.044 | DOI Listing |
Publication Analysis
Top Keywords
Similar Publications
Ultrasonic backscattering model of lamellar duplex phase microstructures in polycrystalline materials.
Ultrasonics
January 2025
School of Information Science and Technology, Beijing University of Technology, Beijing 100124 China.
Carbon steel and low alloy steel are pearlitic heat-resistant steels with a lamellar microstructure. There are good mechanical properties and are widely used in crucial components of high-temperature pressure. However, long-term service in high-temperature environments can easily lead to material degradation, including spheroidization, graphitization, and thermal aging.
View Article and Find Full Text PDFSize Engineering of TiCT Nanosheets for Enhanced Supercapacitance Performance.
Molecules
January 2025
Key Laboratory for Photonic and Electronic Bandgap Materials, Ministry of Education, School of Physics and Electronic Engineering, Harbin Normal University, Harbin 150025, China.
In this research, we synthesized a series of TiCT nanosheets with varying lateral dimensions and conducted a thorough investigation into the profound relationship between the electrochemical performance of TiCT materials and their lateral sizes. This study innovatively incorporates a clever combination of small-sized and large-sized TiCT nanosheets in the electrode preparation process. This strategy yields excellent results at low scan rates, with the fabricated electrode achieving a high volumetric capacitance of approximately 658 F/g.
View Article and Find Full Text PDFImpact of Radial Electrode Coverage on the Performance of Liquid-Deployed PMUTs: A Dynamic and Kinematic Study.
Micromachines (Basel)
January 2025
Faculty for the Built Environment, University of Malta, MSD 2080 Msida, Malta.
This paper highlights the optimisation of a key design parameter essential to the development of PMUTs, which are part of the transmitting components of microsensors. These microsensors are designed for use in the Structural Health Monitoring of reinforced concrete structures. Enhancing the effectiveness of the transmitting component allows for greater spacing between microsensors, which in turn reduces the number of devices needed to implement a full structural health monitoring system.
View Article and Find Full Text PDFResearch on Dry Coupling Technology in the Ultrasonic Non-Destructive Testing of Concrete.
Micromachines (Basel)
January 2025
College of Mechanical & Electrical Engineering, Central South University, Changsha 410083, China.
In the health monitoring and safety assessments of concrete structures, ultrasonic non-destructive testing (NDT) technology has become an indispensable tool due to its non-destructive nature, efficiency, and precision. However, when used in inspecting irregular concrete surfaces, traditional planar ultrasonic transducers often encounter energy loss and signal attenuation induced by poor interface coupling, which significantly reduces the accuracy and reliability of the test results. To address this problem, this article proposes a point-contact dry coupling ultrasonic transducer solution, which enables efficient acquisition of ultrasonic signals within concrete without the need for couplants.
View Article and Find Full Text PDFA Novel Temperature Drift Compensation Algorithm for Liquid-Level Measurement Systems.
Micromachines (Basel)
December 2024
Key Laboratory of Micro/Nano Devices and Systems, Ministry of Education, North University of China, Taiyuan 030051, China.
Aiming at the problem that ultrasonic detection is greatly affected by temperature drift, this paper investigates a novel temperature compensation algorithm. Ultrasonic impedance-based liquid-level measurement is a crucial non-contact, non-destructive technique. However, temperature drift can severely affect the accuracy of experimental measurements based on this technology.
View Article and Find Full Text PDFWant AI Summaries of new PubMed Abstracts delivered to your In-box?
Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!