A novel sensor array using seven room-temperature ionic liquids (ILs) as sensing materials and a quartz crystal microbalance (QCM) as a transducer was developed for the detection of organic vapors at ambient and elevated temperatures. Ethanol, dichloromethane, benzene, and heptane were selected as representative gas analytes for various kinds of environmental pollutants and common industrial solvents. The QCM/IL sensors responded proportionately and reversibly to the organic vapor concentrations (i.e., ethanol, heptane, and benzene) in the gas phase from 0 to 100% saturation at room and elevated temperatures (e.g., 120 degrees C) but deviated from this linear relationship at high concentrations for dichloromethane, a highly volatile compound. Linear discriminant analysis was used to analyze the sensing patterns. Excellent classifications were obtained for both known and unknown concentrations of vapor samples. The correct classifications were 100% for known concentration samples and 96% for samples with unknown concentrations. Thermodynamics and ATR-FT-IR studies were conducted to understand specific molecular interactions, the strength of the interaction between ILs and organic vapors, and the degree of ordering that takes place upon dissolution of the vapors in ILs. The different response intensity of the QCM/IL sensors to the organic vapors depends on the different solubilities of organic vapors in ILs and varying molecular/ion interactions between each organic vapor and IL. The diverse set of IL studied showed selective responses due to structural differences. Therefore, a sensor array of ILs would be able to effectively differentiate different vapors in pattern recognitions, facilitating discrimination by their distinctive patterns in response to organic vapors in both room and high temperatures.
Download full-text PDF |
Source |
---|---|
http://dx.doi.org/10.1021/ac0608669 | DOI Listing |
J Phys Chem B
January 2025
Department of Chemistry, Sungkyunkwan University, Suwon 16419, Republic of Korea.
Physical vapor deposition is widely used in the fabrication of organic light-emitting diodes and has the potential to adjust the density and orientation through substrate temperature control, which may lead to enhanced electrical performance. However, it is unclear whether this enhanced property is because of the horizontal molecular orientation or the increased density. The effects of the density and orientation on the electrical properties of a potential electron transport material, (3-dibenzo[c,h]acridin-7-yl)phenyl)diphenylphosphine oxide (TPPO-dibenzacridine), were investigated.
View Article and Find Full Text PDFSensors (Basel)
January 2025
Department of Biomedical Engineering, Yonsei University, Wonju 26493, Republic of Korea.
This study presents the fabrication of a sustainable flexible humidity sensor utilizing chitosan derived from mealworm biomass as the primary sensing material. The chitosan-based humidity sensor was fabricated by casting chitosan and polyvinyl alcohol (PVA) films with interdigitated copper electrodes, forming a laminate composite suitable for real-time, resistive-type humidity detection. Comprehensive characterization of the chitosan film was performed using Fourier-transform infrared (FTIR) spectroscopy, contact angle measurements, and tensile testing, which confirmed its chemical structure, wettability, and mechanical stability.
View Article and Find Full Text PDFInt J Environ Res Public Health
December 2024
Institute of Integrated Atmospheric Environment, 1-2-8 Koraku, Bunkyo, Tokyo 112-0004, Japan.
Concerns regarding the health risks associated with employe exposure to volatile chemicals during gasoline refueling necessitates rigorous investigation and effective countermeasures. This study aims to evaluate the efficacy of vapor recovery systems in mitigating exposure risks during gasoline refueling. Employee exposure to volatile organic compounds, aldehydes, carbon monoxide, and fine particulate matter (PM) was assessed at gasoline stations with and without vapor recovery systems.
View Article and Find Full Text PDFFoods
January 2025
Department of Chemical Organic Technology and Polymeric Materials, Faculty of Chemical Technology and Engineering, West Pomeranian University of Technology, Pułaskiego 10, 70-322 Szczecin, Poland.
In order to establish the differences in packaging containing various essential oils, polylactide (PLA)-based polymeric films incorporating poly(ethylene glycol) (PEG), clove (C), grapefruit (G), rosemary (R), and tea tree (T) essential oils were obtained and subsequently analyzed. In addition to examining structure and morphology, the polymer films underwent analyses that are particularly important with regard to contact with food. Mechanical and antioxidant properties, water vapor transmission rate (WVTR), and analysis of barrier properties against ultraviolet (UV) radiation, as well as the migration of ingredients into food simulants such as 10% / solutions of ethanol, 3% / acetic acid solution, and isooctane, were among the critical studies conducted.
View Article and Find Full Text PDFJ Am Chem Soc
January 2025
School of Chemistry, Chemical Engineering and Biotechnology, Nanyang Technological University, 21 Nanyang Link, 637371, Singapore.
Photodynamic therapy (PDT) holds promise as a cancer treatment modality due to its potential for enhanced therapy precision and safety. To enhance deep tissue penetration and minimize tissue adsorption and phototoxicity, developing photosensitizers activated by second near-infrared window (NIR-II) light shows significant potential. However, the efficacy of PDT is often impeded by tumor microenvironment hypoxia, primarily caused by irregular tumor vasculature.
View Article and Find Full Text PDFEnter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!