Cerium(IV) tungstate powder was chemically synthesized and exploited as adsorbent material for the decontamination study of cobalt and europium ions from radioactive waste solutions under simulated conditions using batch technique. The influences of pH, particle size and temperature have been reported. The uptake of europium was found to be slightly greater than that of cobalt and the apparent sorption capacity increases with increase in temperature. Thermodynamic parameters such as changes in Gibbs free energy (DeltaG degrees), enthalpy (DeltaH degrees), and entropy (DeltaS degrees) were calculated. The numerical value of DeltaG degrees decreases with an increase in temperature, indicating that the sorption reaction of each ion was spontaneous and more favorable at higher temperature. The positive values of DeltaH degrees correspond to the endothermic nature of sorption processes and suggested that chemisorption was the predominant mechanism. A comparison of kinetic models applied to the sorption rate data of each ion was evaluated for the pseudo first-order, the pseudo second-order, intraparticle diffusion and homogeneous particle diffusion kinetic models. The results showed that both the pseudo second-order and the homogeneous particle diffusion models were found to best correlate the experimental rate data. The numerical values of the rate constants and particle diffusion coefficients were determined from the graphical representation of the proposed models. Activation energy (E(a)) and entropy (DeltaS++) of activation were also computed from the linearized form of Arrhenius equation.

Download full-text PDF

Source
http://dx.doi.org/10.1016/j.jhazmat.2006.07.041DOI Listing

Publication Analysis

Top Keywords

particle diffusion
12
ceriumiv tungstate
8
tungstate powder
8
cobalt europium
8
europium ions
8
increase temperature
8
deltag degrees
8
deltah degrees
8
kinetic models
8
rate data
8

Similar Publications

Phosphorus (P) movement in soils is influenced by flow velocities, diffusion rates, and several soil characteristics and properties. In acidic soils, P is tightly bound to soil particles, reducing its availability to plants. Organomineral fertilizers combine organic matter with mineral nutrients, enhancing P fertilization efficiency, and reducing environmental impacts.

View Article and Find Full Text PDF

Controlled-release microparticles offer a promising avenue for enhancing patient compliance and minimizing dosage frequency. In this study, we aimed to design controlled-release microparticles of Glipizide utilizing Eudragit S100 and Methocel K 100 M polymers as controlling agents. The microparticles were fabricated through a simple solvent evaporation method, employing various drug-to-polymer ratios to formulate different controlled-release batches labeled as F1 to F5.

View Article and Find Full Text PDF

Predicting per- and polyfluoroalkyl substances removal in pilot-scale granular activated carbon adsorbers from rapid small-scale column tests.

AWWA Water Sci

March 2024

Department of Civil, Construction, and Environmental Engineering, North, Carolina State University, Raleigh, North, Carolina, USA.

Per- and polyfluoroalkyl substances (PFAS) occur widely in drinking water, and consumption of contaminated drinking water is an important human exposure route. Granular activated carbon (GAC) adsorption can effectively remove PFAS from water. To support the design of GAC treatment systems, a rapid bench-scale testing procedure and scale-up approach are needed to assess the effects of GAC type, background water matrix, and empty bed contact time (EBCT) on GAC use rates.

View Article and Find Full Text PDF

Characterization, adsorption kinetic and in vitro release behavior of curcumin loaded with porous mannitol and porous lactose: Template agent method vs. Pore-forming agent method.

Food Res Int

January 2025

Key Laboratory of Modern Preparation of TCM, Ministry of Education, Institute for Advanced Study, Jiangxi University of Chinese Medicine, Nanchang 330004, China. Electronic address:

Polyvinylpyrrolidone K30 was used as the templating agent, and ammonium bicarbonate was used as the pore-forming agent to make porous mannitol and porous lactose by the template and pore-forming agent method, respectively. Compared with the template method, the porous particles prepared by the pore-forming agent method have larger pore diameter (320.276 nm and 250.

View Article and Find Full Text PDF

Probing the Self-Assembly dynamics of cellulose nanocrystals by X-ray photon correlation spectroscopy.

J Colloid Interface Sci

December 2024

Wallenberg Wood Science Center, KTH Royal Institute of Technology, SE-100 44 Stockholm, Sweden; Department of Fibre and Polymer Technology, KTH Royal Institute of Technology, SE-100 44 Stockholm, Sweden. Electronic address:

Hypothesis: Charge-stabilized colloidal cellulose nanocrystals (CNCs) can self-assemble into higher-ordered chiral nematic structures by varying the volume fraction. The assembly process exhibits distinct dynamics during the isotropic to liquid crystal phase transition, which can be elucidated using X-ray photon correlation spectroscopy (XPCS).

Experiments: Anionic CNCs were dispersed in propylene glycol (PG) and water spanning a range of volume fractions, encompassing several phase transitions.

View Article and Find Full Text PDF

Want AI Summaries of new PubMed Abstracts delivered to your In-box?

Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!