Introduction: In this study, we investigated ultramorphology, surface roughness, and microhardness of permanent and deciduous tooth enamel after various stripping methods.
Methods: One hundred twenty deciduous and permanent teeth (n = 60 each) were used. Qualitative (scanning electron microscopy) and quantitative (surface roughness and microhardness tests) experiments were carried out in the following experimental groups: group 1, stripping disk; group 2, diamond-coated metal strip; group 3, stripping disk and Sof-Lex discs (3M-ESPE, Seefeld, Germany); group 4, diamond-coated metal strip and Sof-Lex discs; group 5 (chemical stripping), 37% orthophosphoric acid in conjunction with diamond-coated metal strip; group 6 (control), no stripping. Surface roughness values (Ra) for permanent and deciduous enamel were evaluated with Welch analysis of variance (ANOVA) and Tamhane tests, and Kruskal-Wallis and Mann-Whitney tests, respectively. Microhardness values were evaluated statistically with Kruskal-Wallis, 1-way ANOVA, and Duncan tests.
Results: Deciduous and permanent teeth showed similar results in terms of surface roughness and surface morphology. Groups 3 and 4 had the smoothest deciduous and permanent enamel surfaces, whereas chemical stripping (group 5) produced the roughest surfaces in both enamel types. Stripping did not lead to a significant change in the microhardness of permanent enamel.
Conclusions: All stripping methods significantly roughened the enamel surfaces. Polishing the stripped surface with Sof-Lex discs decreased the roughness.
Download full-text PDF |
Source |
|---|---|
| http://dx.doi.org/10.1016/j.ajodo.2006.01.021 | DOI Listing |
Publication Analysis
Top Keywords
Similar Publications
Uncovering the Dynamics of Li-Au Alloying and Li Nucleation at the Au/LiPON Interface with In Situ Contrast and Surface Roughness Contrast Imaging via Scanning Electron Microscopy.
JACS Au
December 2024
Department of Materials Design Innovation Engineering, Nagoya University, Furo-cho, Chikusa-ku, Nagoya 464-8603, Aichi, Japan.
Controlling the nucleation, growth, and dissolution of Li is crucial for the high cycling stability in rechargeable Li metal batteries. The overpotential for Li nucleation (η) on Li alloys such as Li-Au is generally lower than that on metal current collectors (CCs) with very limited Li solubility like Cu. However, the alloying process of CC and its impact on the Li nucleation kinetics remain unclear.
View Article and Find Full Text PDFOptimizing CNC turning of AISI D3 tool steel using Al₂O₃/graphene nanofluid and machine learning algorithms.
Heliyon
December 2024
School of Mechanical Engineering, Institute of Technology, Wallaga University, P.O. Box 395, Nekemte, Ethiopia.
Turning AISI (American Iron and Steel Institute) D3 tool steel can be challenging due to a lack of optimal process parameters and proper coolant application to achieve high surface quality and temperature control. Machine learning helps in predicting the optimal parameters, whereas nanofluids enhance cooling efficiency while preserving both the tool and the workpiece. This work intends to utilize advanced machine learning approaches to optimize process parameters with the application of hybrid nanofluids (AlO/graphene) during the CNC turning of AISI D3.
View Article and Find Full Text PDFEffect of the crystalline structure of ceramic orthodontic brackets on the adherence of and : An study.
Dent Res J (Isfahan)
November 2024
Department of Orthodontics, Faculty of Dentistry, Tehran Azad University of Medical Sciences, Tehran, Iran.
Background: With recent increases in demand for the esthetic aspects of orthodontic treatments, the use of ceramic brackets has gained more popularity. Dental demineralization is a frequent, undesired effect of microbial biofilm adhesion to orthodontic appliances. The crystalline structure of ceramics results in different material properties, and its possible effect on microbial adhesion was investigated in this study.
View Article and Find Full Text PDFUtilizing Solvent Repulsion between Dimethylformamide and Isopropanol to Manipulate Sn Distribution for Bifacial CuZnSn(S,Se) Solar Cells.
ACS Appl Energy Mater
December 2024
School of Chemistry, University of Bristol, Cantocks Close, BS8 1TS Bristol, U.K.
Rationalizing the role of chemical interactions in the precursor solutions on the structure, morphology, and performance of thin-film CuZnSn(S,Se) (CZTSSe) is key for the development of bifacial and other photovoltaic (PV) device architectures designed by scalable solution-based methods. In this study, we uncover the impact of dimethylformamide (DMF) and isopropanol (IPA) solvent mixtures on cation complexation and rheology of the precursor solution, as well as the corresponding morphology, composition, and PV performance of CZTSSe thin-film grown on fluorine-doped tin oxide (FTO). We find that increasing the proportion of IPA leads to a nonlinear increase in dynamic viscosity due to the strong repulsion between DMF and IPA, which is characterized by an interaction cohesion parameter of 3.
View Article and Find Full Text PDFDesign, characterisation, and clinical evaluation of a novel porous Ti-6Al-4V hemipelvic prosthesis based on Voronoi diagram.
Biomater Transl
September 2024
Orthopaedic Research Institute and Department of Orthopaedics, West China Hospital, Sichuan University, Chengdu, Sichuan Province, China.
Three-dimensional printed Ti-6Al-4V hemipelvic prosthesis has become a current popular method for pelvic defect reconstruction. This paper presents a novel biomimetic hemipelvic prosthesis design that utilises patient-specific anatomical data in conjunction with the Voronoi diagram algorithm. Unlike traditional design methods that rely on fixed, homogeneous unit cell, the Voronoi diagram enables to create imitation of trabecular structure (ITS).
View Article and Find Full Text PDFWant AI Summaries of new PubMed Abstracts delivered to your In-box?
Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!