Test of a chemical timing method for measuring absolute vibrational relaxation rate constants for S1 p-difluorobenzene.

A chemical timing (CT) method for measuring absolute rate constants for collisional vibrational relaxation has been tested for the 5(1) state of S(1) p-difluorobenzene (pDFB) where an alternative method exists to provide benchmark values. The CT method was originally developed to treat vibrational energy transfer (VET) in large molecules excited to high vibrational levels where the intramolecular vibrational redistribution (IVR) resulting from large vibrational state densities completely eliminates vibrational structure in the emission spectrum. Here we apply the same method to a low-lying state (5(1) with epsilon(vib) = 818 cm(-1)) located in the low-density region of the vibrational manifold where IVR plays no role. For high vibrational levels, the chemical timing method involves addition of high O(2) pressures (kTorr) to a low-pressure pDFB sample, introducing vibrational structure in the fluorescence spectrum. Response of this spectrum to vibrational relaxation by Ar is then examined. For levels such as 5(1), the fully structured fluorescence spectrum allows the rate constant for single-collision VET into the surrounding vibrational field to be measured directly without the presence of O(2). The measurements of 5(1) VET have been repeated with various O(2) pressures (kTorr) for comparison with the O(2)-free benchmark. In the presence of O(2), the rate constant for VET by Ar is (4.0 +/- 0.5) x 10(6) Torr(-1) s(-1) and independent of high O(2) pressure variations. The rate constant as found by the standard O(2)-free method is (3.6 +/- 0.4) x 10(6) Torr(-1) s(-1). This comparison suggests that the chemical timing method is capable of providing a reasonably accurate measure of the VET rate constant for high vibrational levels provided that details of the kinetics are known.