Molecular weight dependent charge carrier mobility in poly(3,3' '-dioctyl-2,2':5',2' '-terthiophene).

Poly(3,3' '-dioctyl-2,2':5',2' '-terthiophene), a polymer recently used for the fabrication of organic field effect transistors, has been fractionated into five fractions distinctly differing in their molecular weights (Mn), with the goal of determining the influence of the degree of polymerization (DPn) on its principal physicochemical parameters. It has been demonstrated that within the Mn range studied (from 1.5 kDa to 10.5 kDa by SEC), corresponding to DPn from 10 to 38, the polymer band gap steadily decreases with growing molecular weight, which is clearly manifested by an increasing bathochromic shift of the band originating from the pi-pi* transition. The same trend is observed for the HOMO level, determined from the onset of the p-doping in cyclic voltammetry, which shifts from -5.10 eV to -4.90 eV for the lowest and the highest molecular weight fractions, respectively. The most pronounced influence of DPn has been found for the charge carriers' mobility-one of the most important parameters of field effect transistors (FETs) fabricated from this polymer. A fourfold increase in DPn results in an increase of the carriers' mobility by more than 3 orders of magnitude. Comparison of these results with those obtained for fractionated regioregular poly(3-hexylthiophene) shows a strikingly similar behavior of both polymers with respect to the molecular weight.