Adsorptive removal of parachlorophenol (PCP) and 2,4,6-trichlorophenol (TCP) from aqueous solutions by activated carbon prepared from coconut shell was studied and compared with activated carbon of commercial grade (CAC). Various chemical agents in different concentrations were used (KOH, NaOH, CaCO(3), H(3)PO(4) and ZnCl(2)) for the preparation of coconut shell activated carbon. The coconut shell activated carbon (CSAC) prepared using KOH as chemical agent showed high surface area and best adsorption capacity and was chosen for further studies. Batch adsorption studies were conducted to evaluate the effect of various parameters such as pH, adsorbent dose, contact time and initial PCP and TCP concentration. Adsorption equilibrium reached earlier for CSAC than CAC for both PCP and TCP concentrations. Under optimized conditions the prepared activated carbon showed 99.9% and 99.8% removal efficiency for PCP and TCP, respectively, where as the commercially activated carbon had 97.7% and 95.5% removal for PCP and TCP, respectively, for a solution concentration of 50mg/L. Adsorption followed pseudo-second-order kinetics. The equilibrium adsorption data were analysed by Langmuir, Freundlich, Redlich-Peterson and Sips model using non-linear regression technique. Freundlich isotherms best fitted the data for adsorption equilibrium for both the compounds (PCP and TCP). Similarly, acidic pH was favorable for the adsorption of both PCP and TCP. Studies on pH effect and desorption revealed that chemisorption was involved in the adsorption process. The efficiency of the activated carbon prepared was also tested with real pulp and paper mill effluent. The removal efficiency using both the carbons were found highly satisfactory and was about 98.7% and 96.9% as phenol removal and 97.9% and 93.5% as AOX using CSAC and CAC, respectively.
Download full-text PDF |
Source |
---|---|
http://dx.doi.org/10.1016/j.jhazmat.2006.05.045 | DOI Listing |
Environ Sci Pollut Res Int
January 2025
The State University of New York College of Environmental Science and Forestry, Syracuse, USA.
Polychlorinated biphenyls (PCBs) are persistent organic pollutants and are emitted during e-waste activities. Once they enter into the environment, PCBs could pose toxic effects to environmental compartments and public health. Reductive dechlorination offers a sustainable solution to manage the PCBs-contaminated environment.
View Article and Find Full Text PDFSci Rep
January 2025
Department of Environmental Engineering, Kwangwoon University, Seoul, 01897, Republic of Korea.
This study explores the enhanced adsorption performance of activated carbon felt (ACF) for Cu(II) and Cd(II) ions, achieved using a dual-synergistic approach combining MnO coating and plasma treatment. ACF's intrinsic properties, including a high surface area (~ 1000-2000 m²/g), large porosity, and excellent mechanical stability, make it a promising material for environmental applications. However, its limited surface functional groups hinder its adsorption efficiency for heavy metals.
View Article and Find Full Text PDFEnviron Res
January 2025
Chemical Process Engineering, P.O. Box 4300, FIN-90014 University of Oulu, Oulu, Finland.
A low-cost and renewable magnetite-pine bark (MPB) sorbent was evaluated in continuous-flow systems for the removal of various pharmaceuticals from municipal wastewater effluent following membrane bioreactor (MBR) treatment. A 33-day small-scale column test (bed volume: 791 cm) was conducted using duplicate columns of biochar (BC, Novocarbo) and activated carbon (AC, ColorSorb) as reference for two columns of BC and MPB in order to compare the efficiency of AC and MPB. After the small-scale column test, the pharmaceutical concentrations were generally below the detection limit.
View Article and Find Full Text PDFEnviron Res
January 2025
Department of Civil and Environmental Engineering, School of Environment and Society, Institute of Science Tokyo, Meguro-ku, Tokyo, 152-8552, Japan.
The treatment of antibiotic wastewater often faces the challenge of simultaneously and effectively degrading multiple components under complex conditions. To address this challenge, magnetite nanoparticles doped ultrafine activated charcoal powder (MNPs/UACP), which effectively catalyzed the decomposition of HO into •OH and HO•, was prepared using chemical co-precipitation. Under optimum conditions (i.
View Article and Find Full Text PDFJ Phys Chem A
January 2025
Departamento de Química, Instituto Tecnológico de Aeronáutica, São José dos Campos, 12228-900 São Paulo, Brazil.
Polycyclic aromatic hydrocarbons (PAHs) exhibit intriguing characteristics that position them as promising candidates for advancements in organic semiconductor technologies. Notably, tetracene finds substantial utility in Electronics due to its application in organic light-emitting diodes (OLEDs) and organic field-effect transistors (OFETs). The strategic introduction of an isoelectronic boron-nitrogen (B,N) pair to replace a carbon-carbon pair in acenes introduces changes in the electronic structure, allowing for the controlled modulation of diradical characteristics.
View Article and Find Full Text PDFEnter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!