Fresnel lens to concentrate solar energy for the photocatalytic decoloration and mineralization of orange II in aqueous solution.

Chemosphere

Universidad de Castilla-La Mancha, Departamento de Ingeniería Química, Escuela Técnica Superior de Ingenieros Industriales, Avda. Camilo José Cela, 1, 13071 Ciudad Real, Spain.

Published: November 2006

The decoloration and mineralization of the azo dye orange II under conditions of artificial ultraviolet light and solar energy concentrated by a Fresnel lens in the presence of hydrogen peroxide and TiO(2)-P25 was studied. A comparative study to demonstrate the viability of this solar installation was done to establish if the concentration reached in the focus of the Fresnel lens was enough to improve the photocatalytic degradation reaction. The degradation efficiency was higher when the photolysis was carried out under concentrated solar energy irradiation as compared to UV light source in the presence of an electron acceptor such us H(2)O(2) and the catalyst TiO(2). The effect of hydrogen peroxide, pH and catalyst concentration was also determined. The increase of H(2)O(2) concentration until a critical value (14.7 mM) increased both the solar and artificial UV oxidation reaction rate by generating hydroxyl radicals and inhibiting the (e(-)/h(+)) pair recombination, but the excess of hydrogen peroxide decreases the oxidation rate acting as a radical or hole scavenger and reacting with TiO(2) to form peroxo-compounds, contributing to the inhibition of the reaction. The use of the response surface methodology allowed to fit the optimal values of the parameters pH and catalyst concentration leading to the total solar degradation of orange II. The optimal pH range was 4.5-5.5 close to the zero point charge of TiO(2) depending on surface charge of catalyst and dye ionization state. Dosage of catalyst higher than 1.1 gl(-1) decreases the degradation efficiency due to a decrease of light penetration.

Download full-text PDF

Source
http://dx.doi.org/10.1016/j.chemosphere.2006.04.057DOI Listing

Publication Analysis

Top Keywords

fresnel lens
12
solar energy
12
hydrogen peroxide
12
decoloration mineralization
8
degradation efficiency
8
catalyst concentration
8
solar
6
catalyst
5
lens concentrate
4
concentrate solar
4

Similar Publications

Spatially selective imaging (SSI) involves sampling a group of pixels from different positions on an encoded object to display a decoded image. Here, SSI is achieved by using off-axis cylindrical Fresnel lens arrays to decode multiple images from an encoded print of structural color pixels. Each image is optically retrieved by separately placing different "keys" (arrays of lenses in different pseudorandom configurations) over the same encoded print, and then each image is digitally reconstructed for visualization.

View Article and Find Full Text PDF

Background: Reduction of spontaneous nystagmus by fixation, a characteristic feature of peripheral nystagmus, is important for differentiating between peripheral and central vestibular disorders. In the emergency room, Frenzel goggles are recommended to observe spontaneous nystagmus for the differential diagnosis of acute vestibular syndrome. We developed a portable loupe with a Fresnel lens to observe nystagmus.

View Article and Find Full Text PDF

New Design Scheme for and Application of Fresnel Lens for Broadband Photonics Terahertz Communication.

Sensors (Basel)

November 2024

State Key Laboratory of ASIC and System, Key Laboratory for Information Science of Electromagnetic Waves (MoE), School of Information Science and Technology, Fudan University, Shanghai 200433, China.

In terahertz communication systems, lens antennas used in transceivers are basically plano-convex dielectric lenses. The size of a plano-convex lens increases as the aperture increases, and thinner lenses have longer focal lengths. Through theory and simulation, we designed a Fresnel lens suitable for the terahertz band to meet the requirements of large aperture and short focal length, and simulated the performance, advantages, and disadvantages of the terahertz Fresnel lens.

View Article and Find Full Text PDF

A single-exposure method for complex amplitude reconstruction in beam quality analysis is proposed, utilizing lens-free coherent amplitude modulation imaging (LF-CAMI). This approach leverages a partially saturated diffraction pattern to reconstruct the complex amplitude of a measured laser beam. The corresponding intensity images near the beam waist along the axial direction are determined directly via the Fresnel diffraction formula.

View Article and Find Full Text PDF

Optoacoustic lenses for lateral sub-optical resolution elasticity imaging.

Photoacoustics

February 2025

Optics and Photonics Group, Faculty of Engineering, University of Nottingham, University Park, Nottingham, NG7 2RD, Nottinghamshire, United Kingdom.

In this paper, we demonstrate for the first time the focusing of gigahertz coherent phonon pulses propagating in water using picosecond ultrasonics and Brillouin light scattering. We achieve this by using planar Fresnel zone plate and concave lenses with different focal lengths. Pump light illuminating the optoacoustic lens generates a focusing acoustic field, and Brillouin scattered probe light allows the acoustic field to be continuously monitored over time.

View Article and Find Full Text PDF

Want AI Summaries of new PubMed Abstracts delivered to your In-box?

Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!