Many polyurethane elastomers display excellent mechanical properties and adequate biocompatibility. However, many medical-grade polyurethanes are prepared from aromatic diisocyanates and can degrade in vivo to carcinogenic aromatic diamines, although the question of whether the concentrations of these harmful degradation products attain physiologically relevant levels is currently unresolved and strongly debated. It is therefore desirable to synthesize new medical-grade polyurethanes from less toxic aliphatic diisocyanates. In this paper, biocompatible segmented polyurethane elastomers were synthesized from aliphatic diisocyanates (1,4-diisocyanatobutane (BDI) and lysine methyl ester diisocyanate (LDI)), novel diurea diol chain extenders based on tyrosine and tyramine, and a model poly(ethylene glycol) (PEG) diol soft segment. The objectives were to design a hard segment similar in structure to that of MDI-based polyurethanes and also investigate the effects of systematic changes in structure on mechanical and biological properties. The non-branched, symmetric polyurethane prepared from BDI and a tyramine-based chain extender had the highest modulus at 37 degrees C. Introduction of symmetric short-chain branches (SCBs) incorporated in the tyrosine-based chain extender lowered the modulus by an order of magnitude. Polyurethanes prepared from LDI were soft polymers that had a still lower modulus due to the asymmetric SCBs that hindered hard segment packing. Polyurethanes prepared from tyramine and tyrosine chain extenders thermally degraded at temperatures ranging from 110 to 150 degrees C, which are lower than that reported previously for phenyl urethanes. All four polyurethanes supported the attachment, proliferation, and high viability of MG-63 human osteoblast-like cells in vitro. Therefore, the non-cytotoxic chemistry of these polyurethanes make them good candidates for further development as biomedical implants.

Download full-text PDF

Source
http://dx.doi.org/10.1016/j.actbio.2005.02.007DOI Listing

Publication Analysis

Top Keywords

aliphatic diisocyanates
12
chain extenders
12
polyurethanes prepared
12
biocompatible segmented
8
polyurethanes
8
diurea diol
8
diol chain
8
polyurethane elastomers
8
medical-grade polyurethanes
8
hard segment
8

Similar Publications

Exploring the Chemical Permeation Resistance and Surface Adsorption Properties of Polyurethane Coatings.

Langmuir

December 2024

Shanghai Key Laboratory of Advanced Polymeric Materials, School of Materials Science and Engineering, East China University of Science and Technology, Shanghai 200237, China.

This work explores the adsorption and permeation of chemical warfare agents on polymer coatings to assess their protective potential. Two highly cross-linked aliphatic polyurethanes (PUs) were synthesized from two diisocyanate trimers, and their adsorption and permeation of dimethyl methylphosphonate (DMMP) and 2-chloroethyl ethyl sulfide (CEES) were analyzed using quartz crystal microbalance with dissipation and gas chromatography. The study revealed distinct adsorption properties for each agent and the PU.

View Article and Find Full Text PDF

Polyurethane (PU) plays a critical role in elastomers, adhesives, and self-healing materials. We selected the most commonly used aromatic isocyanates, 4,4'-methylene diphenyl diisocyanate (MDI) and tolylene-2,4-diisocyanate (TDI), and the most commonly used aliphatic isocyanates, hexamethylene diisocyanate (HDI), isophorone diisocyanate (IPDI), and dicyclohexylmethane-4,4'-diisocyanate (HMDI), as raw materials, combined with polytetramethylene ether glycol (PTMG) and 1,4-butanediol (BDO) to successfully synthesize five PU materials. The effects of isocyanate structure on polymerization rate, hydrogen bonding, thermal properties, phase separation, wettability, self-healing performance, adhesion, and mechanical properties were systematically investigated.

View Article and Find Full Text PDF

Advancing Food Packaging: Exploring Cyto-Toxicity of Shape Memory Polyurethanes.

Materials (Basel)

September 2024

Grupo de Química Macromolecular (LABQUIMAC), Departamento de Química Física, Facultad de Ciencia y Tecnología, Universidad del País Vasco UPV/EHU, CSIC, 48940 Leioa, Spain.

Cytotoxicity is a critical parameter for materials intended for biological applications, such as food packaging. Shape-memory polyurethanes (SMPUs) have garnered significant interest due to their versatile properties and adaptability in synthesis. However, their suitability for biological applications is limited by the use of aromatic isocyanates, such as methylene diphenyl 4,4'-diisocyanate (MDI) and toluene diisocyanate (TDI), which are commonly used in SMPU synthesis but can generate carcinogenic compounds upon degradation.

View Article and Find Full Text PDF

Synthesis of Dimethyl Hexane-1,6-dicarbamate with Methyl Carbamate as Carbonyl Source over MCM-41 Catalyst.

ACS Omega

October 2024

CAS Key Laboratory of Green Process and Engineering, National Engineering Research Center of Green Recycling for Strategic Metal Resources, Institute of Process Engineering, Chinese Academy of Sciences, Beijing 100190, China.

Dimethyl hexane-1,6-dicarbamate (HDC), the vital intermediate for nonphosgene production of hexamethylene-diisocyanate (HDI), was effectively synthesized via carbonylation of 1,6-hexanediamine (HDA) using methyl carbamate (MC) as a carbonyl source over a silanol-rich MCM-41 catalyst. The effects of reaction conditions, including the reaction temperature, molar ratio of raw materials, methanol dosage, catalyst dosage, and reaction time, on the HDC yield were evaluated. Under the reaction conditions with a reaction temperature of 190 °C, a molar ratio of HDA, MC, and methanol of 1:6:50, a catalyst dosage of 10 wt %, and a reaction time of 3 h, the yield of HDC can reach as high as 92.

View Article and Find Full Text PDF

A Study of Hydroxyl-Terminated Block Copolyether-Based Binder Curing Kinetics.

Polymers (Basel)

August 2024

School of Materials Science and Engineering, Beijing Institute of Technology, Beijing 100081, China.

In order to determine the curing reaction model and corresponding parameters of hydroxyl-terminated block copolyether (HTPE) and provide a theoretical reference for its practical application, the non-isothermal differential scanning calorimetry (DSC) method was used to analyze the curing processes of three curing systems with HTPE and N-100 (an aliphatic polyisocyanate curing agent), isophorone diisocyanate (IPDI), and a mixture of N-100 and IPDI as curing agents. The results show that the curing activation energy of N-100 and HTPE was about 69.37 kJ/mol, slightly lower than the curing activation energy of IPDI and HTPE (75.

View Article and Find Full Text PDF

Want AI Summaries of new PubMed Abstracts delivered to your In-box?

Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!