A high-resolution transmission electron microscopy (HRTEM) investigation of a family of supported Ru catalysts prepared from Ru hydroxyl-terminated poly(amidoamine) dendrimer-metal nanocomposite (DMN) precursors has been conducted. Ru particle sizes observed following deposition of DMNs on a HRTEM grid can be controlled within a 0.9-1.4 nm range depending on the metal-to-dendrimer molar ratio. The average particle size in this case correlates well with the theoretically predicted particle size from the molar loading of Ru in the dendrimer. Upon impregnation of Ru-DMNs on Al(2)O(3) and subsequent thermal removal of the dendrimer via reduction at 300 degrees C, significant sintering of the Ru particles was observed. Nevertheless, the resulting supported Ru particles maintained a narrow particle size distribution and average particle size below 2.5 nm. These particle sizes no longer correlate with the metal-to-dendrimer molar ratio but do correlate with the metal-to-dendrimer weight ratio, suggesting that the dendrimer may be acting as a "sintering-control" agent on the catalyst surface. This process is not affected by the surface area of the support, since almost identical particle size distributions were obtained on three different commercial supports.
Download full-text PDF |
Source |
|---|---|
| http://dx.doi.org/10.1021/jp057025a | DOI Listing |
Publication Analysis
Top Keywords
Similar Publications
Modeling absorbed alpha particle dose from diffusing alpha-emitters radiation therapy in changing tissue volumes.
Med Phys
January 2025
Department of Medical Physics, Memorial Sloan Kettering Cancer Center, New York, New York, USA.
Background: Diffusing alpha-emitters Radiation Therapy ("Alpha DaRT") is a promising new radiation therapy modality for treating bulky tumors. Ra-carrying sources are inserted intratumorally, producing a therapeutic alpha-dose region with a total size of a few millimeter via the diffusive motion of Ra's alpha-emitting daughters. Clinical studies of Alpha DaRT have reported 100% positive response (30%-100% shrinkage within several weeks), with post-insertion swelling in close to half of the cases.
View Article and Find Full Text PDFOptimization of x-ray dark-field CT for human-scale lung imaging.
Med Phys
January 2025
Department of Engineering Physics, Tsinghua University, Beijing, China.
Background: X-ray grating-based dark-field imaging can sense the small angle scattering caused by object's micro-structures. This technique is sensitive to the porous microstructure of lung alveoli and has the potential to detect lung diseases at an early stage. Up to now, a human-scale dark-field CT (DF-CT) prototype has been built for lung imaging.
View Article and Find Full Text PDFCe1-xMnxVO4 with Improved Activity for Low-Temperature Catalytic Reduction of NO with NH3.
Chem Asian J
January 2025
Fudan University, Department of Environmental Science and Engineering, Shanghai Handan Road 220, 200433, Shanghai, CHINA.
Novel Ce1-xMnxVO4 catalysts prepared via modified hydrothermal synthesis were used in selective catalytic reduction of NO using NH3 (NH3-SCR). The Ce1-xMnxVO4 catalysts displayed optimum NO removal efficiency at 250 oC. Physicochemical properties including crystal type, morphology, particle size, elemental composition, BET surface area, chemical bond, and valence state were studied by XRD, TEM, EDS, N2 adsorption-desorption, Raman spectroscopy, and XPS.
View Article and Find Full Text PDFInvestigation of corrosion and water absorption of biomass natural coir fiber/hBN reinforced epoxy hybrid composites using different optimisation approaches.
Sci Rep
January 2025
Centre for Advanced Materials and Innovative Technologies, Vellore Institute of Technology, Chennai, 600127, Tamilnadu, India.
Agricultural waste or agro-waste, including natural fibers and particles from various crop parts, is increasingly recognized as a significant contributor to environmental issues. However, from a circular economy perspective, these materials present an opportunity to be repurposed into new, eco-friendly products. The present study, specifically focuses on understanding the effect of different factors, such as the particulate loading and the size (coir and hBN - 1 to 5 wt%; Coir Powder size (100-200 μm) of the particles on composite's corrosion rates and water absorption properties.
View Article and Find Full Text PDFOptimizing key parameters for grinding energy efficiency and modeling of particle size distribution in a stirred ball mill.
Sci Rep
January 2025
Minerals Beneficiation and Agglomeration Department, Minerals Technology Institute, Central Metallurgical Research & Development Institute (CMRDI), P.O. Box 87, Helwan, Cairo, 11722, Egypt.
Fine grinding using a stirred ball mill can enhance ore liberation but incurs high energy consumption, which can be minimized by optimizing operating conditions. This study explores the impact of key operational parameters-grinding time, stirrer tip speed, solid concentration, and feed size-on grinding efficiency, evaluated using specific energy inputs, in stirred milling of Egyptian copper ore. The particle size distribution (PSD) of ground products was simulated using the Gates-Gaudin-Schuhmann model (GGS) and the Rosin-Rammler-Benne (RRB) function.
View Article and Find Full Text PDFWant AI Summaries of new PubMed Abstracts delivered to your In-box?
Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!