Model of the mass transport to the surface of animal cells cultured in a rotating bioreactor operated in micro gravity.

Biotechnol Bioeng

Department of Mechanical Engineering, Tecnológico de Monterrey, Eugenio Garza Sada 2501, Monterrey, Nuevo León 64849, Mexico.

Published: June 2006

AI Article Synopsis

Article Abstract

A mathematical model is used to investigate the transport of dissolved oxygen from the bulk fluid to the surface of aggregates of animal cells cultured in a rotating bioreactor. These aggregates move through different regions of the bioreactor with a local flow field and concentration distribution that vary with time. The time variation of the Sherwood number and the surface concentration for a range of parameters typical of a cell science experiment executed in the Rotating Wall Perfused Vessel (RWPV) bioreactor in space are investigated. The Reynolds numbers experienced by the aggregate are generally low (Re < 1) and the Peclet numbers range from O(1) to O(100). Comparison of the results from the numerical solution of the mathematical model with those from a quasi-steady model, using a steady-state correlation for mass transport on a sphere, indicate that the quasi-steady assumption is not a good model to compute the instantaneous Sherwood number. This indicates a significant history effect in the Sherwood number response to the variations of acceleration of the aggregates in the bioreactor. A high resistance to the mass transport from the bulk fluid to the surface of the aggregate exists for the bioreactor operated in micro gravity. The difference between the surface concentration and the free stream concentration was as high as 30% for aggregates larger than 3 mm. Diffusion reduces the variations of the free stream concentration resulting in a nearly constant value for the concentration at the surface of the aggregates.

Download full-text PDF

Source
http://dx.doi.org/10.1002/bit.20864DOI Listing

Publication Analysis

Top Keywords

mass transport
12
sherwood number
12
animal cells
8
cells cultured
8
cultured rotating
8
rotating bioreactor
8
bioreactor operated
8
operated micro
8
micro gravity
8
mathematical model
8

Similar Publications

Microplastics (MP) are known to be ubiquitous. The pathways and fate of these contaminants in the marine environment are receiving increasing attention, but still knowledge gaps exist. In particular, the link between mass-based MP quantification and oceanographic parameters is often lacking.

View Article and Find Full Text PDF

Groundwater-dependent ecosystems in areas with industrial land use are at risk of exposure to a PFAS chemicals. We investigated one such system with several known PFAS source areas, where high and low permeability sediments (glacial) coupled with groundwater-lake and groundwater/surface-water interactions created complex 'source to seep' dynamics. Using heat-tracing and chemical methods, numerous preferential groundwater discharge zones were identified and sampled across the upper Quashnet River stream-wetland system in Mashpee, MA, USA, downgradient of Joint Base Cape Cod (JBCC).

View Article and Find Full Text PDF

Bombyx mori bidensovirus (BmBDV), a significant pathogen in the sericulture industry, holds a unique taxonomic position due to its distinct segmented single-stranded DNA (ssDNA) genome and the presence of a self-encoding DNA polymerase. However, the functions of viral non-structural proteins, such as NS2, remain unknown. This protein is hypothesized to play a role in viral replication and pathogenesis.

View Article and Find Full Text PDF

Synthesis of P(AM/AA/SSS/DMAAC-16) and Studying Its Performance as a Fracturing Thickener in Oilfields.

Polymers (Basel)

January 2025

Engineering Research Center of Oil and Gas Field Chemistry, Universities of Shaanxi Provence, Xi'an Shiyou University, Xi'an 710065, China.

In order to solve the problems of long dissolution and preparation time, cumbersome preparation, and easy moisture absorption and deterioration during storage or transportation, acrylamide (AM), acrylic acid (AA), sodium p-styrene sulfonate (SSS), and cetyl dimethylallyl ammonium chloride (DMAAC-16) were selected as raw materials, and the emulsion thickener P(AM/AA/SSS), which can be instantly dissolved in water and rapidly thickened, was prepared by the reversed-phase emulsion polymerization method. DMAAC-16, the influence of emulsifier dosage, oil-water ratio, monomer molar ratio, monomer dosage, aqueous pH, initiator dosage, reaction temperature, reaction time, and other factors on the experiment was explored by a single-factor experiment, and the optimal process was determined as follows: the oil-water volume ratio was 0.4, the emulsifier dosage was 7% of the oil phase mass, the initiator dosage was 0.

View Article and Find Full Text PDF

This article systematically investigated the improvement effect of polypropylene fiber (PPF) on the mechanical and freeze-thaw properties of alkali-activated fly ash slag concrete (AAFSC) with high fly ash content and cured at room temperature. Fly ash and slag were used as precursors, with fly ash accounting for 80% of the total mass. A mixed solution of sodium hydroxide and sodium silicate was used as alkali activator, and short-cut PPF was added to improve the performance of AAFSC.

View Article and Find Full Text PDF

Want AI Summaries of new PubMed Abstracts delivered to your In-box?

Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!