Purpose: The purpose of this in vitro study was to measure heat generated at the implant-bone interface caused by exothermic setting reaction of 2 impression plasters.
Materials And Methods: The study consisted of 20 titanium-alloy abutment impressions connected to a titanium-alloy cylindrical implant embedded in an acrylic-resin mandible in a 37 degrees C water bath. There were 2 types of impression plaster used, Snow-White (Kerr, Romulus, MI) and Xantano (Kulzer, Dormagen, Germany). Temperature changes were recorded via embedded thermocouples at the cervix and implant surface apex. Analysis of variance for repeated measures was used to compare 2 treatment groups.
Results: Temperature increased less at the implant apex (1.5 degrees-2.1 degrees C) than at the implant cervix (7.4 degrees-10.5 degrees C). Differences between the 2 impression plasters were statisticallysignificant only at the implant cervical level (P < 0.05). A lower temperature increase was shown with the Snow-White compared with the Xantano. Although both plasters generated an exothermic reaction on setting (mean temperature change 22 degrees C), the increase in the temperature rate of the Snow-White was slower than the Xantano.
Conclusions: Under the conditions of the present study, Snow-White impression plaster appears to be safer to use in implant prosthodontics compared with the Xantano because of its slower and lower exothermic reaction at the implant-bone interface. However, use of the material with the rapid setting time would require more care, such as limiting the volume of material used (e.g., by using a custom tray).
Download full-text PDF |
Source |
|---|---|
| http://dx.doi.org/10.1097/01.id.0000202424.82293.7b | DOI Listing |
Publication Analysis
Top Keywords
Similar Publications
Immediate dental implant placement with and without Platelet-Rich Fibrin (PRF) in esthetic zone: A comparative study.
Natl J Maxillofac Surg
November 2024
Department of Oral and Maxillofacial Surgery, Maulana Azad Institute of Dental Sciences, New Delhi, India.
Context: Biomaterials such as platelet-rich fibrin (PRF) have shown to improve healing and osseointegration.
Aims: The aim of this study was to clinically and radiographically evaluate and compare immediate implants placed with and without PRF.
Settings And Design: This prospective and comparative study was conducted among 30 patients in the Department of Oral and Maxillofacial Surgery, Govt.
Signs of in-vivo aging of zirconia from explanted dental implants with porous coating after several years in function.
Acta Biomater
January 2025
MATEIS, UMR CNRS 5510, INSA, FR- 7 Avenue Jean Capelle, 69621 Villeurbanne cedex, France. Electronic address:
The present study investigated the in vivo aging of yttria-stabilized zirconia (YSZ) oral implants (ZiUnite®) removed after 37 to 181 months. These implants featured a porous zirconia surface to enhance osseointegration. They were placed in prospective clinical investigations and had to be explanted due to peri-implant bone breakdown.
View Article and Find Full Text PDFOsseointegration and fixation opportunities of sacroiliac instrumentation: a preclinical evaluation in a large animal model.
J Spine Surg
December 2024
Surgical and Orthopaedic Research Laboratories, Prince of Wales Clinical School, University of New South Wales, Sydney, AUS.
Background: Implant fixation is often the cornerstone of musculoskeletal surgical procedures performed to provide bony fixation and/or fusion. The aim of this study was to evaluate how different design features and manufacturing methods influence implant osseointegration and mechanical properties associated with fixation in a standardized model in cancellous bone of adult sheep.
Methods: We evaluated the performance of three titanium alloy implants: (A) iFuse-TORQ implant; (B) Fenestrated Sacroiliac Device; and (C) Standard Cancellous Bone Screw in the cancellous bone of the distal femur and proximal tibia in 8 sheep.
A finite element analysis to assess tibial bone fracture in malleolar regions following total ankle replacement: Influences of implant designs and implant-bone interfacial conditions.
Foot Ankle Surg
January 2025
Biomechanics Research Laboratory, School of Mechanical & Materials Engineering, Indian Institute of Technology Mandi, Mandi, Himachal Pradesh 175075, India. Electronic address:
Background: Tibial bone fractures in the malleolar regions are a major concern during the early postoperative period of total ankle replacement (TAR), affecting patient outcomes such as stability and recovery. Design, placement, and anatomic misalignment of implant components can contribute to malleolar fractures. The aim of this study is to understand the influence of implant design features, including keel, peg, stem, and bar type design, and bone-implant interfacial conditions on malleolar fracture following TAR.
View Article and Find Full Text PDFImplant failure of the Compress prosthesis: a case report.
J Med Case Rep
January 2025
Department of Orthopaedic Surgery, Nagoya University Graduate School of Medicine, Nagoya University Hospital, 65 Tsurumai, Showa, Nagoya, Aichi, 466-8550, Japan.
Background: The Compress is designed to achieve bone formation and stability by applying pressure at the bone-implant interface, minimizing the likelihood of aseptic loosening, which is a complication of stem implants. Herein, we report two cases of implant failure using the Compress.
Case Presentation: Case 1 describes a 36 year-old Japanese man who underwent extraarticular tumor resection, Compress arthroplasty, and reconstruction with a gastrocnemius flap after preoperative chemotherapy for a secondary malignant giant cell tumor in the right distal femur.
Want AI Summaries of new PubMed Abstracts delivered to your In-box?
Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!