The purpose of this study was to evaluate the production feasibility of triaxial whiteware using sand from cast iron moulds as a raw material instead of silica, and recycled glass in place of feldspar. Formulations were prepared using sand, glass waste, and white-firing clay such that only 50% of the composition was virgin material (clay). The ceramic bodies were formed by pressing and fired at different temperatures (between 1100 and 1300 degrees C). Specimens were characterized in terms of green density prior to firing; and their flexural strength, linear shrinkage, and water absorption were measured after firing. The microstructure was determined by scanning electron microscopy. Possible environmental impacts of this recycling process were also evaluated, through solubility and leaching tests, according to Brazilian standards. Gaseous emissions during the firing process were also analysed. The results showed that it is possible to produce triaxial ceramics by using such alternative raw materials.
Download full-text PDF |
Source |
|---|---|
| http://dx.doi.org/10.1177/0734242X06061155 | DOI Listing |
Publication Analysis
Top Keywords
Similar Publications
A smartphone label-free and automated thermo-analytical method based on image analysis to detect microplastics.
Sci Total Environ
December 2024
Laboratory of Biosensors and Bioanalysis (LABB), Department of Biological Chemistry, IQUIBICEN, University of Buenos Aires and CONICET, CABA, Argentina.
Microplastics (MPs) are in some ways the expected product of man-made plastics that are considered as a pollutant ubiquitous in the environment. This is particularly notorious in continental waters, along coastlines, and especially in the North Pacific Gyre, sometimes called the Pacific Garbage Patch. Even now, there is growing concern that MPs can harm wildlife, enter the food chain, and end up in the human body.
View Article and Find Full Text PDFHigh strength, self-activating ability and fast adhesion of polyurethane adhesives based on rosin structure in different environments.
Mater Horiz
December 2024
College of Chemical Engineering, Nanjing Forestry University, Jiangsu Province, Nanjing, 210037, PR China.
Underwater adhesives hold significant relevance in daily life and applications. Despite great efforts, the development of high-performance underwater adhesives through a simple and effective method remains a difficult challenge. Herein, a high adhesion and environmentally stable polyurethane underwater adhesive (DAP-PU) was developed based on rosin with a hydrogenated phenanthrene ring skeleton to design hydrophobic domains, and combined with multi-strength hydrogen bonding interactions to construct "polar hydrophobic domains".
View Article and Find Full Text PDFShort-Beam Shear Strength of New-Generation Glass Fiber-Reinforced Polymer Bars Under Harsh Environment: Experimental Study and Artificial Neural Network Prediction Model.
Polymers (Basel)
November 2024
Civil and Environmental Engineering Department, King Fahd University of Petroleum & Minerals, Dhahran 31261, Saudi Arabia.
In this study, the short-beam shear strength (SBSS) retention of two types of glass fiber-reinforced polymer (GFRP) bars-sand-coated (SG) and ribbed (RG)-was subjected to alkaline, acidic, and water conditions for up to 12 months under both high-temperature and ambient laboratory conditions. Comparative assessments were also performed on older-generation sand-coated (SG-O) and ribbed (RG-O1 and RG-O2) GFRP bars exposed to identical conditions. The results demonstrate that the new-generation GFRP bars, SG and RG, exhibited significantly better durability in harsh environments and exhibited SBSS retentions varying from 61 to 100% in SG and 90-98% in RG under the harshest conditions compared to 56-69% in SG-O, 71-80% in RG-O1, and 74-88% in RG-O2.
View Article and Find Full Text PDFDragonfly-Inspired Transparent Superhydrophobic Coatings with Low Haze and High Mechanical Robustness.
ACS Appl Mater Interfaces
December 2024
Department of Materials Science and State Key Laboratory of Molecular Engineering of Polymers, Advanced Coatings Research Center of Ministry of Education of China, Fudan University, Shanghai 200438, China.
Transparent superhydrophobic coatings hold significant potential for applications such as windows and reflectors. However, issues such as fragility and high haze have limited their practicality. Drawing inspiration from dragonfly structures, we developed a transparent superhydrophobic coating by etching the polystyrene microsphere array semiembedded on a silicon oxide matrix and subsequently depositing the methyltrichlorosilane-derived nanofilaments.
View Article and Find Full Text PDFCharacterizing major and trace element concentrations, and radioactivity in bulk glass samples from the trinity atomic test.
J Environ Radioact
December 2024
1 Kiowa Lane, White Rock, NM, 87547, USA.
Glass fragments (16 green glasses and 2 red glasses) were handpicked from crushed Trinitite. X-ray diffraction studies revealed that these samples were essentially pure glass with the exception of minor amounts (less than 4 wt%) of quartz (which acts as a diluent) in some samples. The concentrations of 45 elements in the Trinity glasses were determined using Instrumental Neutron Activation Analysis.
View Article and Find Full Text PDFWant AI Summaries of new PubMed Abstracts delivered to your In-box?
Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!