The successful application of electrochemical technology, employing a dimensionally stable anode (DSA((R))), for the remediation of wastewater from the oil extraction industry has been demonstrated. Samples from the oil-water separation box of an effluent treatment plant were submitted to voltammetry, chronoamperometry and electrolysis studies using a DSA anode of nominal composition Ti/Ru(0.34)Ti(0.66)O(2). Electrolysis of the oily wastewater lead to a time-dependent reduction in chemical oxygen demand (COD) in the sample that could be attributed to: (i) the direct oxidation of oil components at the electrode, by the metal oxide itself or by OH() radicals available at the electrode surface, (ii) the indirect oxidation of oil components by intermediate oxidising agents formed in parallel reactions (ex. ClO(-)), and (iii) the aggregation of suspended oil droplets by electroflotation. The largest reduction (57%) in COD was obtained following electrolysis of an oily sample for 70 h at 50 degrees C with a current density of 100 mA cm(-2). The stability of DSA electrodes for use in oily wastewater remediation has been assessed.
Download full-text PDF |
Source |
---|---|
http://dx.doi.org/10.1016/j.chemosphere.2005.12.036 | DOI Listing |
ACS Appl Mater Interfaces
January 2025
Department of Physics, National Institute of Technology Nagaland, Chumukedima, Dimapur 797103, India.
An exceedingly porous and interwoven fibrous structure was achieved in this study by interlocking titanium carbide (TiC) MXenes onto the electrospun mats using poly(vinylidene fluoride) (PVDF) as the base polymer. The fibrous membrane was further modified with the inclusion of zinc oxide (ZnO) and tungstite (WO·HO) nano/microstructures via annealing and hydrothermal approaches. Through these strategic interfaced morphological developments in novel TiC/ZnO/WO·HO heterostructures, our findings reveal enhanced wettability and charge-segregation desirable for promoting oil-water separation and photoreactivity, respectively.
View Article and Find Full Text PDFRSC Adv
January 2025
Hainan Provincial Key Laboratory of Natural Rubber Processing, Agricultural Products Processing Research Institute, Chinese Academy of Tropical Agricultural Sciences Zhanjiang 524001 P. R. China
Addressing the environmental challenges posed by oil spills and industrial wastewater is critical for sustainable development. Graphene aerogels demonstrate significant potential as highly efficient adsorbents due to their high specific surface area, excellent structural tunability and outstanding chemical stability. Among available fabrication methods, the hydrothermal self-assembly technique stands out for its low cost, high tunability and good scalability.
View Article and Find Full Text PDFInt J Biol Macromol
December 2024
Institute of Chemicobiology and Functional Materials, School of Chemical Engineering, Nanjing University of Science and Technology, 200 Xiao Ling Wei, Nanjing 210094, China. Electronic address:
Water purification has always been a critical yet challenging issue. In this study, an organic-inorganic composite membrane was developed using 2,2,6,6-tetramethylpiperidine-1-oxyl radical (TEMPO)-oxidized bacterial cellulose (BC) nanofibers and hydroxyapatite nanowires (HAPNW) with tunable wettability for advanced membrane separation applications. The resulting free-standing TEMPO-BC/HAPNW filter membrane exhibited strong mechanical strength, high flexibility, exceptional deformability, and a high pure water flux of up to 800 L·m·h due to its porous architecture and inherent hydrophilicity.
View Article and Find Full Text PDFMembranes (Basel)
December 2024
Department of Mechanical Engineering, Mount Vernon Nazarene University, 800 Martinsburg Rd, Mt Vernon, OH 43050, USA.
The development of affordable ceramic membranes is essential for reducing expenses and optimizing the treatment of oily wastewater. There is an urgent demand for membranes that are not only affordable and easy to operate but also stable and capable of managing high fluxes to address the increasing volumes of oily wastewater. The significant production demands associated with many commercially available ceramic membranes, primarily due to the use of specialised raw materials and intricate processing methods, limiting their suitability for many wastewater treatment applications.
View Article and Find Full Text PDFJ Hazard Mater
December 2024
College of Materials Science and Chemical Engineering, Harbin Engineering University, Harbin 150001, China; Nanhai Institute of Harbin Engineering University, Sanya 572024, China. Electronic address:
The rational use of solar energy to achieve photothermal conversion is an attractive strategy to promote the efficient removal of radioactive Cs and Sr from nuclear wastewater. Herein, a photothermal adsorbent of composite aerogel with three-dimensional porous structure is fabricated by integrating prussian blue analogues (PBAs) and straw biochar into the chitosan (CS) and waste leather scrap hydrolysate (WLSH) aerogel matrix (CS/WLSH/C/PBAs). The local heating effect generated by CS/WLSH/C/PBAs aerogel induce to generate steam, accelerating the enrichment of Cs and Sr in the solution, which increase their interaction with the CS/WLSH/C/PBAs and improves their adsorption rates and capacities.
View Article and Find Full Text PDFEnter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!