A full-scale and two pilot-scale upflow sulfur-oxidizing denitrification (SOD) columns were evaluated using metal plating wastewater as feed. The sludge was autotrophically enriched, and inoculated in the SOD columns attached to the effluent line of three metal plating wastewater treatment facilities. The effects of activated carbon and aeration were also studied, and found effective for the removal of suspended solids and ammonia, respectively. The results showed that the constituents, such as the total nitrogen, nitrates, nitrites, ammonia, chemical oxygen demand (COD), and heavy metals, were effectively removed. The pH was observed to be maintained at 7-8 due to the alkalinity supplied by the sulfur-calcium carbonate (SC) pellet. The denitrification efficiency and start-up period were observed to be affected by the influent quality. Chromium, iron, nickel, copper, and zinc--the major heavy metal components of the influent--were effectively reduced at certain concentrations. Other metal ions were also detected and reduced to undetectable concentrations, but no trends in the comparison with denitrification were observed. From the results it can be concluded that SOD is effective for the removal of nitrogen, particularly nitrates, without a drastic pH change, and can effectively remove minute concentrations of heavy metals and COD in metal plating wastewaters.
Download full-text PDF |
Source |
|---|---|
| http://dx.doi.org/10.1080/10934520500299604 | DOI Listing |
Publication Analysis
Top Keywords
Similar Publications
Deciphering and Enhancing Rate-Determining Step of Sodium Deposition towards Ultralow-Temperature Sodium Metal Batteries.
Angew Chem Int Ed Engl
January 2025
National University of Singapore, Chemistry, 3 Science Drive 3, 117543, Singapore, SINGAPORE.
Achieving high ionic conductivity and stable performance at low temperatures remains a significant challenge in sodium-metal batteries (SMBs). In this study, we propose a novel electrolyte design strategy that elucidates the solvation structure-function relationship within mixed solvent systems. A mixture of diglyme and 1,3-dioxolane was developed to optimize the solvation structure towards superior low-temperature electrolyte.
View Article and Find Full Text PDFBreaking Anionic Solvation Barrier for Safe and Durable Potassium-ion Batteries Under Ultrahigh-Voltage Operation.
Angew Chem Int Ed Engl
January 2025
Northeast Normal University, Faculty of Chemistry, Remin Street 5268, 130024, Changchun, CHINA.
Ultrahigh-voltage potassium-ion batteries (PIBs) with cost competitiveness represent a viable route towards high energy battery systems. Nevertheless, rapid capacity decay with poor Coulombic efficiencies remains intractable, mainly attributed to interfacial instability from aggressive potassium metal anodes and cathodes. Additionally, high reactivity of K metal and flammable electrolytes pose severe safety hazards.
View Article and Find Full Text PDFSynergistic Modulation of Solid- and Cathode-Electrolyte Interphase via a Lithium Salt Additive toward Stable Sodium Metal Batteries.
Nano Lett
January 2025
Eastern Institute for Advanced Study, Eastern Institute of Technology, Ningbo, Zhejiang 315200, P. R. China.
Constructing feasible sodium metal batteries (SMBs) faces complex challenges in stabilizing cathodes and sodium metal anodes. It is imperative, but often underemphasized, to simultaneously regulate the solid-electrolyte interphase (SEI) to counter dendrite growth and the cathode-electrolyte interphase (CEI) to mitigate cathode deterioration. Herein, we introduce lithium 2-trifluoromethyl-4,5-dicyanoimidazolide (LiTDI) as an efficacious additive in a carbonate-based electrolyte to extend cycle lifespan of full SMBs: the capacity retention reaches 77.
View Article and Find Full Text PDFGuide-wire and K-wire readjustment jig for osteotomy and osteosynthesis: An instrument.
J Clin Orthop Trauma
February 2025
Joints and Spine Clinic, Mahavir Nagar, Kandivali West, Mumbai, 400067, India.
Introduction: Numerous orthopaedic procedures including dynamic hip screw plating and various osteotomies require placement of a reference guide pin or K wire to direct bone cuts or for drilling screw holes. Appropriate positioning of these wires is a critical component of surgery. Irrespective of whether one is a seasoned surgeon or an apprentice, these wires often need repositioning and readjustment.
View Article and Find Full Text PDFRevealing the Principles of Confining Electroplated Lithium beneath the CVD Grown Single Layer 2D Materials.
Small
January 2025
MOE Key Laboratory for Nonequilibrium Synthesis and Modulation of Condensed Matter, Shaanxi Province Key Laboratory of Advanced Materials and Mesoscopic Physics, School of Physics, Xi'an Jiaotong University, Xi'an, 710049, P. R. China.
Owing to the nanoscale thickness, excellent mechanical and chemical stabilities, 2D materials including graphene and hexagonal boron nitride have emerged as promising artificial solid electrolyte interphase (SEI) candidates for lithium metal batteries. However, whether the implementation of 2D materials is beneficial to electrochemical performance remains controversial, and the key to confining the electroplated Li beneath the 2D materials remains elusive. Here, a nanocrystalline graphene (NG) film is synthesized on high-carbon Cu and the Li plating/stripping behavior on Cu grown with different 2D materials is investigated.
View Article and Find Full Text PDFWant AI Summaries of new PubMed Abstracts delivered to your In-box?
Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!