This study considered the impact of wind mixing on the efficiency of BOD removal and the first order biodegradation constant for organic matter in a primary facultative pond. Wind speeds of 1-4 m/s blowing from the effluent end of the pond towards the influent created surface-water flows of up to 0.94 m/s as determined by orange and coconut drogues moving in the opposite direction to the bulk hydraulic flow of 0.217 m/s. This was sufficient to cause mixing of the water column resulting in loss of stratification in terms of chlorophyll a, temperature and dissolved oxygen. BOD and chlorophyll a concentrations were spatially and temporally homogeneous throughout this large pond. BOD removal efficiency was only 50.30% as opposed to a projected value of 79% despite an acceptable surface organic loading of 350 kgBOD5/ha/d and an actual k value for BOD removal using influent sewage samples of 0.29 d-1 close to the projected value of 0.30 d-1. It would seem that wind mixing reduced pond efficiency by destroying stratification and thus reducing the microbial activity necessary to consume organic material. Mixing also increased the mean chlorophyll a concentration compared to stratified facultative ponds receiving similar loads and non-motile algae dominated the water column.
Download full-text PDF |
Source |
---|
J Environ Manage
January 2025
Chemical Engineering Department, Faculty of Industrial Technology, Institut Teknologi Bandung, Jl. Ganesha 10, Bandung, 40132, Indonesia; Research Center for Biosciences and Biotechnology, Institut Teknologi Bandung, Jl. Ganesha 10, Bandung, 40132, Indonesia.
This article reviews the role of membrane systems in treating palm oil mill effluent (POME), a waste generated by the palm industry. The review focuses on various membrane systems such as microfiltration (MF), ultrafiltration (UF), nanofiltration (NF), and reverse osmosis (RO), highlighting their effectiveness in removing pollutants and recovering water. Special attention is given to hybrid systems integrating membrane bioreactors (MBRs) and other advanced processes to enhance fouling control, improve water quality, and promote sustainability.
View Article and Find Full Text PDFBiotechnol Notes
December 2024
Department of Chemistry, Faculty of Science, Agriculture, and Engineering, University of Zululand, Private Bag X1001, KwaDlangezwa, 3886, South Africa.
Nanotechnology is a rapidly expanding field with diverse healthcare, agriculture, and industry applications. Central to this discipline is manipulating materials at the nanoscale, particularly nanoparticles (NPs) ranging from 1 to 100 nm. These NPs can be synthesized through various methods, including chemical, physical, and biological processes.
View Article and Find Full Text PDFHeliyon
January 2025
African Centre of Excellence in Future Energies and Electrochemical Systems (ACE-FUELS), Federal University of Technology, Owerri, PMB 1526, Imo State, Nigeria.
The management of wastewater and agricultural wastes has been limited by the separate treatment processes, which exacerbate pollution and contribute to climate change through greenhouse gas emissions. Given the energy demands and financial burdens of traditional treatment facilities, there is a pressing need for technologies that can concurrently treat solid waste and generate energy. This study aimed to evaluate the feasibility of producing bioelectricity and biohydrogen through the microbial treatment of blackwater and agricultural waste using a dual-chamber Microbial Fuel Cell (MFC).
View Article and Find Full Text PDFEnviron Sci Pollut Res Int
January 2025
Department of Environmental Health, Health Promotion Research Center, Zahedan University of Medical Sciences, Zahedan, Iran.
Sci Rep
January 2025
Department of Chemistry, College of Basic Sciences, Yadegar-E-Imam Khomeini (RAH) Shahre Rey Branch, Islamic Azad University, Tehran, Iran.
This study presents the development and characterization of manganese ferrite (MnFeO)-based nanocomposites with graphite oxide (GO) and chitosan (CS) for efficient dye removal from textile wastewater and aqueous solution. Comprehensive characterization was performed using FT-IR, Raman, XRD, BET, SEM, DRS and Zeta potential techniques. XRD analysis confirmed the cubic spinel structure of MnFeO, with characteristic peaks at 2θ = 32, 35, 48, 53, 62, and 64°.
View Article and Find Full Text PDFEnter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!