Speciation of Zn associated with diatoms using X-ray absorption spectroscopy.

Environ Sci Technol

Aqueous and Environmental Experimental Geochemistry Group--LMTG, UMR 5563, CNRS, 14 Avenue Edouard Belin, 31400 Toulouse, France.

Published: June 2005

The long- and short-term interactions between zinc, an essential but also toxic element, and freshwater and marine diatoms are not well understood partly because of a lack of information on Zn speciation on the surface and inside the cells. In this work, interactions of aqueous Zn2+ with marine (Skeletonema costatum) and freshwater (Achnanthidium minutissimum, Navicula minima, and Melosira varians) diatoms were studied using conventional macroscopic techniques, while the local atomic structure of metal ions adsorbed on their surface or incorporated into the cells was characterized by in-situ Zn K-edge X-ray absorption fine structure (XAFS) spectroscopy on both intact and liophylized samples. At the cell surface for all diatom species studied, Zn was tetrahedrally coordinated with oxygen at approximately 2.00 +/- 0.02 A and monodentately bonded to one or two carboxylate groups; these results are consistent with the surface speciation model developed from macroscopic adsorption experiments. The atomic environment of Zn incorporated into freshwater diatoms during long-term growth in normal nutrient media was distinctly differentfrom that of adsorbed Zn: it was dominated by O (and/or N) neighbors in a tetrahedral arrangement at 1.97 +/- 0.02 A in the first atomic shell, with the presence of 1 phosphorus and 2 carbons in the Zn second shell. Contrasting speciation of intracellular zinc was revealed for the marine species Skeletonema costatum in which Zn was coordinated to 2 O/N atoms and 2 sulfur groups in the form of cysteine-histidine complexes and/or zinc thiolate clusters. These new structural data strongly suggest: (i) the predominant > R-COO- ligand binding of Zn atthe diatom surface; (ii) the nonspecific storage of Zn in the form of carboxylate/phosphate groups inside the cell of freshwater species; and (iii) the highly specific thiol-ligand coordination of intracellular zinc for marine S. costatum species.

Download full-text PDF

Source
http://dx.doi.org/10.1021/es0480419DOI Listing

Publication Analysis

Top Keywords

x-ray absorption
8
skeletonema costatum
8
+/- 002
8
intracellular zinc
8
surface
5
speciation
4
speciation associated
4
diatoms
4
associated diatoms
4
diatoms x-ray
4

Similar Publications

Synthesis of P(AM/AA/SSS/DMAAC-16) and Studying Its Performance as a Fracturing Thickener in Oilfields.

Polymers (Basel)

January 2025

Engineering Research Center of Oil and Gas Field Chemistry, Universities of Shaanxi Provence, Xi'an Shiyou University, Xi'an 710065, China.

In order to solve the problems of long dissolution and preparation time, cumbersome preparation, and easy moisture absorption and deterioration during storage or transportation, acrylamide (AM), acrylic acid (AA), sodium p-styrene sulfonate (SSS), and cetyl dimethylallyl ammonium chloride (DMAAC-16) were selected as raw materials, and the emulsion thickener P(AM/AA/SSS), which can be instantly dissolved in water and rapidly thickened, was prepared by the reversed-phase emulsion polymerization method. DMAAC-16, the influence of emulsifier dosage, oil-water ratio, monomer molar ratio, monomer dosage, aqueous pH, initiator dosage, reaction temperature, reaction time, and other factors on the experiment was explored by a single-factor experiment, and the optimal process was determined as follows: the oil-water volume ratio was 0.4, the emulsifier dosage was 7% of the oil phase mass, the initiator dosage was 0.

View Article and Find Full Text PDF

The use of biomass feedstocks for producing high-value-added chemicals is gaining significant attention in the academic community. In this study, near-infrared carbon dots (NIR-CDs) with antimicrobial and bioimaging functions were prepared from branches and leaves using a novel green synthesis approach. The spectral properties of the synthesized NIR-CDs were characterized by ultraviolet-visible (UV-Vis) absorption and fluorescence spectroscopy.

View Article and Find Full Text PDF

Rhabdophane, CePO∙HO, nanoparticles were prepared by mechanochemical synthesis with different durations and thoroughly characterized by various characterization techniques. X-ray diffraction analysis showed that the optimal synthesis duration was 15 min, since, in this case, pure rhabdophane is obtained, without traces of contamination by the vessel material. The size of the obtained nanoparticles, as determined from high-resolution transmission electron microscopy images, was around 5 nm.

View Article and Find Full Text PDF

The findings highlight the potential for broadening the use of shell aggregates in construction applications. This research investigated the viability of incorporating milled seashells as fine sand replacements for natural calcareous sand in the production of self-compacting mortar. These results highlight a promising avenue for coastal industries to reduce waste while enhancing the durability of construction materials.

View Article and Find Full Text PDF

Synthesis of Nanocrystal-Embedded Bulk Metallic Glass Composites by a Combination of Mechanical Alloying and Vacuum Hot Pressing.

Materials (Basel)

January 2025

Research Center of Digital Oral Science and Technology, College of Oral Medicine, Taipei Medical University, Taipei 110-301, Taiwan.

Bulk metallic glasses (i.e., BMGs) have attracted a lot of research and development interest due to their unique properties.

View Article and Find Full Text PDF

Want AI Summaries of new PubMed Abstracts delivered to your In-box?

Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!