High energy efficiency and energy density, together with rapid refuelling capability, render fuel cells highly attractive for portable power generation. Accordingly, polymer-electrolyte direct-methanol fuel cells are of increasing interest as possible alternatives to Li ion batteries. However, such fuel cells face several design challenges and cannot operate with hydrocarbon fuels of higher energy density. Solid-oxide fuel cells (SOFCs) enable direct use of higher hydrocarbons, but have not been seriously considered for portable applications because of thermal management difficulties at small scales, slow start-up and poor thermal cyclability. Here we demonstrate a thermally self-sustaining micro-SOFC stack with high power output and rapid start-up by using single chamber operation on propane fuel. The catalytic oxidation reactions supply sufficient thermal energy to maintain the fuel cells at 500-600 degrees C. A power output of approximately 350 mW (at 1.0 V) was obtained from a device with a total cathode area of only 1.42 cm2.
Download full-text PDF |
Source |
|---|---|
| http://dx.doi.org/10.1038/nature03673 | DOI Listing |
Publication Analysis
Top Keywords
Similar Publications
High-performance boron nitride/graphene oxide composites modified with sodium thiosulfate for energy storage applications.
Nanoscale Adv
January 2025
School of Chemical Engineering, Yeungnam University 280 Daehak-Ro Gyeongsan 38541 Republic of Korea
Two-dimensional (2D) hybrid materials, particularly those based on boron nitride (BN) and graphene oxide (GO), have attracted significant attention for energy applications owing to their distinct structural and electronic properties. BN/GO composites uniquely combine the mechanical strength, thermal stability and electrical insulation of BN with the high conductivity and flexibility of GO, creating advanced materials ideal for the fabrication of batteries, supercapacitors and fuel cells. These hybrids offer synergistic effects, enhanced charge transport, increased surface area, and improved chemical stability, making them promising candidates for high-performance energy systems.
View Article and Find Full Text PDFSuppressing Cation Interdiffusion at CeO/ZrO Heterointerfaces via Dopant Segregation.
ACS Appl Mater Interfaces
January 2025
Hydrogen Fuel Cell Laboratory, Korea Institute of Energy Research (KIER), 152 Gajeong-ro, Yuseong-gu, Daejeon 34129, Korea.
Cation interdiffusion as a result of a chemical-potential gradient occurring at heterointerfaces is often regarded as an unfavorable side reaction and is typically suppressed through the use of a diffusion barrier layer. In this study, we propose a straightforward method for suppressing interdiffusion that involves the creation of nanometer-thick diffusion barrier layers by means of dopant segregation. Using the CeO/ZrO heterointerface in this study, we demonstrate that a Sc acceptor dopant tends to accumulate at the heterointerface during the sintering process, especially at the edge of the CeO grain boundary, thereby effectively suppressing Ce-Zr interdiffusion.
View Article and Find Full Text PDFSLC29A1 and SLC29A2 are human nicotinamide cell membrane transporters.
Nat Commun
January 2025
College of Pharmaceutical Sciences, National Key Laboratory of Advanced Drug Delivery and Release Systems, Zhejiang University, Hangzhou, China.
Nicotinamide (NAM), a main precursor of NAD+, is essential for cellular fuel respiration, energy production, and other cellular processes. Transporters for other precursors of NAD+ such as nicotinic acid and nicotinamide mononucleotide (NMN) have been identified, but the cellular transporter of nicotinamide has not been elucidated. Here, we demonstrate that equilibrative nucleoside transporter 1 and 2 (ENT1 and 2, encoded by SLC29A1 and 2) drive cellular nicotinamide uptake and establish nicotinamide metabolism homeostasis.
View Article and Find Full Text PDFApplication of bio-electrochemical systems for phosphorus resource recovery: Progress and prospects.
J Environ Manage
January 2025
School of Environmental Science and Engineering, Nanjing Tech University, Nanjing 211816, China. Electronic address:
This review focuses on applying bio-electrochemical systems (BES) for phosphorus (P) recovery. Microbial fuel cells (MFCs) degrade pollutants to generate electricity and recover P, with the structure and electrode materials playing a significant role in P recovery efficiency. Microbial electrolysis cells (MECs) recover P while simultaneously producing hydrogen or methane, with factors such as voltage and pH influencing performance.
View Article and Find Full Text PDFSynchronously degradation of biogas slurry and decarbonization of biogas using microbial fuel cells.
J Environ Sci Health A Tox Hazard Subst Environ Eng
January 2025
School of Environmental Engineering, Faculty of Environmental and Safety Engineering, Qingdao University of Science and Technology, Qingdao, China.
Two-chamber microbial fuel cell (MFC) with biogas slurry (BS) of corn stover as the anode substrate and as the cathode substrate was investigated to solve the problem of the accumulation of wastewater generated from biogas plants and to achieve low-cost separation of CO from biogas. A simple two-compartment MFC was constructed using biocatalysis and inexpensive materials without expensive catalysts. The performance of MFC (X1-W, Y1-W, Z1-W) with different biogas solution concentrations as anode substrate and MFC (X2-C, Y2-C, Z2-C) with as biocathode were compared, respectively.
View Article and Find Full Text PDFWant AI Summaries of new PubMed Abstracts delivered to your In-box?
Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!