Recently, lactate has been receiving great attention as an energy substrate in the brain. In this study, the role of lactate was evaluated by "bioradiography" system with 2-deoxy-2-[(18)F]fluoro-d-glucose ([(18)F]FDG), which is a positron emitting radiotracer for glucose uptake quantification. "Bioradiography" is the dynamic living tissue slice imaging system for positron-emitter labeled compounds. We investigated the brain energy metabolism under resting state and neural activated conditions induced by KCl addition. The monocarboxylate transporter inhibitor, alpha-cyano-4-hydroxycinnamate (4-CIN), had no effect on [(18)F]FDG uptake rate in rat brain slices before KCl addition. On the other hand, addition of 4-CIN induced larger [(18)F]FDG uptake rates under the activated condition in comparison with the control condition. Because neurons cannot utilize lactate under the 4-CIN loaded conditions, this indicates that activated neurons consume lactate as an energy substrate. The lactate concentration in the incubation medium was increased with KCl treatment in both groups and the extent was slightly greater in 4-CIN group. These results suggested that: (1) the brain mainly uses glucose, not lactate, as an energy substrate in resting state; (2) when neuron is stimulated, excess amounts of lactate might be produced in astrocytes and the lactate is mobilized as an energy substrate.
Download full-text PDF |
Source |
|---|---|
| http://dx.doi.org/10.1016/j.neures.2005.04.007 | DOI Listing |
Publication Analysis
Top Keywords
Similar Publications
Interfacial functionalization and capillary force welding of enhanced silver nanowire-cellulose nanofiber composite electrodes for electroluminescent devices.
Int J Biol Macromol
December 2024
Plant Fiber Material Science Research Center, State Key Laboratory of Pulp and Paper Engineering, School of Light Industry and Engineering, South China University of Technology, Guangzhou 510640, PR China; Guangdong Provincial Key Laboratory of Plant Resources Biorefinery, Guangzhou 510640, PR China.
The development of flexible, intelligent, and lightweight optoelectronic devices based on flexible transparent conductive electrodes (FTCEs) utilizing silver nanowires (AgNWs) has garnered increasing attention. However, achieving low surface resistance, strong adhesion to the flexible substrate, low surface roughness, and green degradability remains a challenge. Here, a composite electrode combining natural polymer cellulose nanofibers (TCNFs) with AgNWs was prepared.
View Article and Find Full Text PDFPiezoresistive Sensor Based on Porous Sponge with Superhydrophobic and Flame Retardant Properties for Motion Monitoring and Fire Alarm.
ACS Appl Mater Interfaces
December 2024
College of Chemistry and Chemical Engineering, Xi'an University of Science and Technology, Xi'an 710054, China.
Polyurethane sponge is frequently selected as a substrate material for constructing flexible compressible sensors due to its excellent resilience and compressibility. However, being highly hydrophilic and flammable, it not only narrows the range of use of the sensor but also poses a great potential threat to human safety. In this paper, a conductive flexible piezoresistive sensor (CHAP-PU) with superhydrophobicity and high flame retardancy was prepared by a simple dip-coating method using A-CNTs/HGM/ADP coatings deposited on the surface of a sponge skeleton and modified with polydimethylsiloxane.
View Article and Find Full Text PDFA novel electrochemical immunosensor for the ultrasensitive detection of vascular endothelial growth factor based on MB@Cu-MOFs/MWCNTs composite.
Mikrochim Acta
December 2024
School of Pharmacy and Bioengineering, Chongqing University of Technology, Chongqing, 400054, China.
A novel proposal is introduced with an unlabeled electrochemical immunosensor for the detection of tumor broad-spectrum biomarker vascular endothelial growth factor (VEGF165) Copper-based metal organic frameworks (Cu MOFs)-carbon nanotubes (MWCNTs) were employed as its substrates, functionalized with methylene blue (MB) for signal enhancement. Cu-MOFs-MWCNTs nanocomposites were synthesized successfully via a solvothermal method and were then deposited on the surface of a glassy carbon electrode (GCE), with the addition of methylene blue to amplify the signal. Due to the expansive specific surface area provided by the carbon nanotubes and the amino groups facilitated by the metal-organic framework nanomaterials, the anti-VEGF165 monoclonal antibody was immobilized on the electrochemical immunosensor through covalent bonding, which could bind specifically to VEGF165, thereby causing a detectable change in the current.
View Article and Find Full Text PDFHigh photothermal conversion efficiency of RF sputtered TiO Magneli phase thin films and its linear correlation with light absorption capacity.
Sci Rep
December 2024
Centre Énergie, Matériaux Télécommunications, Institut National de la Recherche Scientifique, 1650, Blvd, Lionel-Boulet, Varennes, QC, J3X-1P7, Canada.
RF-sputtering is used to deposit TiO-Magneli-phase films onto various substrates at deposition temperatures (T) ranging from 25 to 650 °C. Not only the structural, but also electrical conductivity, optical absorbance and photothermal properties of the TiO films are shown to change significantly with T. A T of 500 °C is pointed out as the optimal temperature that yields highly-crystalized pure-TiO-Magneli phase with a densely-packed morphology and a conductivity as high as 740 S/cm.
View Article and Find Full Text PDFA simple phenomenological account for the metal-induced crystallization of amorphous Ge and Si films.
Sci Rep
December 2024
Institute of Physics, University of São Paulo, São Carlos, 13560-590, SP, Brazil.
When combined with certain metal species, films of amorphous Ge or Si can have their typical crystallization temperatures decreased, by a factor of three or four, down to ~ 200 °C. The phenomenon is called metal-induced crystallization (MIC) and, since its first observation in the late 1960's, shows a great technological potential in producing (poly-)crystalline films of Ge or Si onto low-melting point substrates under reduced energy conditions. From the scientific point of view, the microscopic mechanisms behind the MIC phenomenon (still) represents a scientific challenge, where most of the proposed models are invariably influenced by the samples details giving the impression that they only apply to very specific metal-semiconductor combinations and/or circumstances.
View Article and Find Full Text PDFWant AI Summaries of new PubMed Abstracts delivered to your In-box?
Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!