Standard Reference Material 2036 (SRM 2036) is a certified transfer standard intended for the verification and calibration of the wavelength/wavenumber scale of near-infrared (NIR) spectrometers operating in diffuse or trans-reflectance mode. SRM 2036 Near-Infrared Wavelength/Wavenumber Reflection Standard is a combination of a rare earth oxide glass of a composition similar to that of SRM 2035 Near-Infrared Transmission Wavelength/Wavenumber Standard and SRM 2065 Ultraviolet-Visible-Near-Infrared Transmission Wavelength/Wavenumber Standard, but is in physical contact with a piece of sintered poly(tetrafluoroethylene) (PTFE). The combination of glass contacted with a nearly ideal diffusely reflecting backing provides reflection-absorption bands that range from 15% R to 40% R. SRM 2036 is certified for the 10% band fraction air wavelength centroid location, (10%)B, of seven bands spanning the spectral region from 975 nm to 1946 nm. It is also certified for the vacuum wavenumber (10%)B of the same seven bands in the spectral region from 10 300 cm(-1) to 5130 cm(-1) at 8 cm(-1) resolution. Informational values are provided for the locations of thirteen additional bands from 334 nm to 804 nm.
Download full-text PDF |
Source |
|---|---|
| http://dx.doi.org/10.1366/0003702053641414 | DOI Listing |
Publication Analysis
Top Keywords
Similar Publications
Ablative Treatments for Small Renal Masses and Management of Recurrences: A Comprehensive Review.
Life (Basel)
March 2024
Department of Neurosciences and Reproductive Sciences and Odontostomatology, University of Naples "Federico II", 80131 Naples, Italy.
This review focuses on ablative techniques for small renal masses (SRMs), including radiofrequency ablation (RFA), cryoablation (CA), microwave ablation (MWA), and irreversible electroporation (IRE), and discusses recurrence management. Through an extensive literature review, we outline the procedures, outcomes, and follow-up strategies associated with each ablative method. The review provides a detailed examination of these techniques-RFA, CA, MWA, and IRE-elucidating their respective outcomes.
View Article and Find Full Text PDFThe Behaviour of Stratified Fabrics of Aramid Fibres under Stabbing Conditions.
Polymers (Basel)
March 2024
Center for Research and Innovation for CBRN Defense and Ecology (CRICBRNDE), 041309 Bucharest, Romania.
This paper presents research on several factors influencing the stabbing behaviour of stratified panels made of aramid fabric Twaron SRM509 Teijin Aramid BV (Arnhem, The Netherlands). The inputs in the test campaign were the number of layers, the impact energy, and the sample size. Tests were performed on small samples (130 mm × 130 mm) on an Instron CEAST 9350 drop-tower impact system (Norwood, MA, USA) and on larger samples (400 mm × 400 mm) using a test installation with the same values of the impact energy.
View Article and Find Full Text PDFPerformance Evaluation of Input Power of Diode Laser on Machined Leather Specimen in Laser Beam Cutting Process.
Materials (Basel)
March 2023
Advanced Manufacturing Institute, King Saud University, Riyadh 11421, Saudi Arabia.
Article Synopsis
- * Performance measures analyzed include carbonization, kerf width, and material removal rate (MRR), showing that a 20 W diode laser outperformed 2.5 W and 5.5 W lasers by producing lower carbonization and kerf width, while achieving a higher MRR.
- * Optimal cutting parameters identified for chrome tanned leather are a standoff distance of 18 mm, a feed rate of 200 mm/min, and a 70% duty cycle, highlighting the benefits of using high power and the ability to adjust laser features.
Standard reference material 2036 near-infrared reflection wavelength standard.
Appl Spectrosc
April 2005
Analytical Chemistry Division, Chemical Science and Technology Laboratory, National Institute of Standards and Technology, Gaithersburg, Maryland 20899-8394, USA.
Standard Reference Material 2036 (SRM 2036) is a certified transfer standard intended for the verification and calibration of the wavelength/wavenumber scale of near-infrared (NIR) spectrometers operating in diffuse or trans-reflectance mode. SRM 2036 Near-Infrared Wavelength/Wavenumber Reflection Standard is a combination of a rare earth oxide glass of a composition similar to that of SRM 2035 Near-Infrared Transmission Wavelength/Wavenumber Standard and SRM 2065 Ultraviolet-Visible-Near-Infrared Transmission Wavelength/Wavenumber Standard, but is in physical contact with a piece of sintered poly(tetrafluoroethylene) (PTFE). The combination of glass contacted with a nearly ideal diffusely reflecting backing provides reflection-absorption bands that range from 15% R to 40% R.
View Article and Find Full Text PDFRare-earth glass reference materials for near-infrared spectrometry: correcting and exploiting temperature dependencies.
Anal Chem
February 2003
Analytical Chemistry Division, Chemical Science and Technology Laboratory, National Institute of Standards and Technology, Gaithersburg, Maryland 20899-8394, USA.
Quantitative descriptions of the location of seven near-infrared absorption bands as functions of temperature 5-50 degrees C are presented here for three recently introduced wavelength/wavenumber Standard Reference Materials (SRMs): SRM 2035, SRM 2065, and SRM 2036. For all bands in all three SRMs, locations are well described as linear models parametrized with the location at 0 degrees C (intercept) and the rate of location change per degrees C (slope). Since these materials were produced from compositionally similar melts, the slopes for each band are identical within measurement imprecision in all three SRMs; only minor differences are observed in the intercepts.
View Article and Find Full Text PDFWant AI Summaries of new PubMed Abstracts delivered to your In-box?
Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!