CFD simulation of shear-induced aggregation and breakage in turbulent Taylor-Couette flow.

J Colloid Interface Sci

Department of Chemical Engineering, Iowa State University, 2114 Sweeney Hall, Ames, IA 50011-2230, USA.

Published: May 2005

AI Article Synopsis

Article Abstract

An experimental and computational investigation of the effects of local fluid shear rate on the aggregation and breakage of approximately 10 microm latex spheres suspended in an aqueous solution undergoing turbulent Taylor-Couette flow was carried out. First, computational fluid dynamics (CFD) simulations were performed and the flow field predictions were validated with data from particle image velocimetry experiments. Subsequently, the quadrature method of moments (QMOM) was implemented into the CFD code to obtain predictions for mean particle size that account for the effects of local shear rate on the aggregation and breakage. These predictions were then compared with experimental data for latex sphere aggregates (using an in situ optical imaging method). Excellent agreement between the CFD-QMOM and experimental results was observed for two Reynolds numbers in the turbulent-flow regime.

Download full-text PDF

Source
http://dx.doi.org/10.1016/j.jcis.2004.10.075DOI Listing

Publication Analysis

Top Keywords

aggregation breakage
12
turbulent taylor-couette
8
taylor-couette flow
8
effects local
8
shear rate
8
rate aggregation
8
cfd simulation
4
simulation shear-induced
4
shear-induced aggregation
4
breakage turbulent
4

Similar Publications

Objective: We compared the protein structure and pathogenicity of clinically relevant variants of the gene with AlphaFold2 (AF2), Alpha Missense (AM), and ThermoMPNN for the first time.

Methods And Analysis: The sequences of clinically relevant Cog4 missense variants (one novel identified p.Y714F and three pre-existing p.

View Article and Find Full Text PDF

Atomic Force Microscopy of Viruses.

Subcell Biochem

December 2024

Department of Physics of the Condensed Matter, C03 and IFIMAC (Instituto de Física de la Materia Condensada). Universidad Autónoma de Madrid, Madrid, Spain.

Atomic force microscopy (AFM) makes it possible to obtain images at nanometric resolution, and to accomplish the manipulation and physical characterization of specimens, including the determination of their mechanical and electrostatic properties. AFM has an ample range of applications, from materials science to biology. The specimen, supported on a solid surface, can be imaged and manipulated while working in air, ultra-high vacuum or, most importantly for virus studies, in liquid.

View Article and Find Full Text PDF

Propagation of Orientation Across Lengthscales in Sheared Self-Assembling Hierarchical Suspensions via Rheo-PLI-SAXS.

Adv Sci (Weinh)

December 2024

Department of Industrial and Materials Science, Division of Engineering Materials, Chalmers University of Technology, Gothenburg, SE-412 96, Sweden.

Simultaneous rheological, polarized light imaging, and small-angle X-ray scattering experiments (Rheo-PLI-SAXS) are developed, thereby providing unprecedented level of insight into the multiscale orientation of hierarchical systems in simple shear. Notably, it is observed that mesoscale alignment in the flow direction does not develop simultaneously across nano-micro lengthscales in sheared suspensions of rod-like chiral-nematic (meso) phase forming cellulose nanocrystals. Rather, with increasing shear rate, orientation is observed first at mesoscale and then extends to the nanoscale, with influencing factors being the aggregation state of the hierarchy and concentration.

View Article and Find Full Text PDF

Rod-shaped silica promotes cellulose hydrolysis by inducing interior structural breakage via penetrated breaking.

Int J Biol Macromol

December 2024

Key Laboratory of Bio-Based Polymeric Materials of Zhejiang Province, Ningbo Institute of Materials Technology and Engineering, Chinese Academy of Sciences, Ningbo, Zhejiang 315201, China.

Solid acid catalysts have attracted much attention in cellulose hydrolysis due to their high product selectivity, easy preparation and reusability. However, most current researches only focus on modifying their surface functional groups but overlook the impact of carrier shape on hydrolytic performance. Herein, we synthesize a series of rod-shaped silica with varying sizes for cellulose hydrolysis to analyze the shape mode to enhance the breaking of cellulose structure during solid-solid reaction.

View Article and Find Full Text PDF

Research on the Structure and Properties of Traditional Handmade Bamboo Paper During the Aging Process.

Molecules

December 2024

State Key Laboratory of Biobased Material and Green Papermaking, Qilu University of Technology, Shandong Academy of Sciences, Jinan 250353, China.

Handmade papers, as carriers of paper-based cultural relics, have played a crucial role in the development of human culture, knowledge, and civilization. Understanding the intricate relationship between the structural properties and degradation mechanisms of handmade papers is essential for the conservation of historical documents. In this work, an artificial dry-heat-accelerated aging method was used to investigate the interplay among the mechanical properties of paper, the degree of polymerization (DP) of cellulose, the chemical composition, the hydrogen bond strength, the crystallinity, and the degree of hornification for paper fibers.

View Article and Find Full Text PDF

Want AI Summaries of new PubMed Abstracts delivered to your In-box?

Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!