Conducting poly(o-toluidine) (POT) with multiwalled carbon nanotubes (MWNTs) nanocomposite (POT-MWNTs) was synthesized by oxidative polymerization. Chloroform solutions of the material were used for the optical characterizations by means of UV-visible spectroscopy and for the fabrication of Langmuir-Schaefer (LS) films. LS films were fabricated at the air-liquid interface by using 0.1 M HCl aqueous solution as the subphase to study the electrochemical properties of the nanocomposite by means of cyclic voltammetry and photoelectrochemical techniques. The optical characterizations gave proof that the presence of MWNTs inside the polymeric matrix produced no change in the (pi-pi*) transition of POT structure, indicating that the polymeric chains were simply wrapped around and not doped by MWNTs. The electrochemical investigations highlighted significant changes in the redox properties of POT-MWNTs LS films with respect to pure POT. The cyclic voltammetric study also revealed high electrochemical stability, confirmed by the estimation of the diffusion coefficient and the photoelectrochemical response of the nanocomposite LS films. This characteristic turned out to be more evident than that obtained in our earlier studied poly(o-anisidine)-MWNTs (POAS-MWNTs) system.

Download full-text PDF

Source
http://dx.doi.org/10.1021/la035372aDOI Listing

Publication Analysis

Top Keywords

electrochemical properties
8
multiwalled carbon
8
carbon nanotubes
8
langmuir-schaefer films
8
optical characterizations
8
films
5
optical electrochemical
4
properties polyo-toluidine
4
polyo-toluidine multiwalled
4
nanotubes composite
4

Similar Publications

Fabrication of bio-mimic nanozyme based on Mxene@AuNPs and molecular imprinted poly(thionine) films for creatinine detection.

Biosens Bioelectron

December 2024

Department of Cogno-Mechatronics Engineering, College of Nanoscience and Nanotechnology, Pusan National University, Busan, 46241, Republic of Korea. Electronic address:

Creatinine (Ctn) is a biomarker for chronic kidney disease (CKD). In this study, a highly sensitive and specific detection method for Ctn based on a molecularly imprinted polymer (MIP) based electrochemical biosensor was developed. Mxene (Mx), which has high absorption properties, was modified using carbon screen-printed electrodes (SPCE).

View Article and Find Full Text PDF

The crystal phase of pseudocapacitive materials significantly influences charge storage kinetics and capacitance; yet, the underlying mechanisms remain poorly understood. This study focuses on tungsten oxide (WO), a material exhibiting multiple crystal phases with potential for energy storage. Despite extensive research on WO, the impact of different crystal structures on charge storage properties remains largely unexplored.

View Article and Find Full Text PDF

Electrolyte Anions Suppress Hydrogen Generation in Electrochemical CO Reduction on Cu.

Angew Chem Int Ed Engl

December 2024

University of Wisconsin-Madison, Chemical and Biological Engineering, 1415 Engineering Drive, 53706, Madison, UNITED STATES OF AMERICA.

In this study, we employed EC-MS to elucidate the role of halide anions in electrochemical CO2 and CO reduction. We found that the undesired hydrogen evolution reaction (HER) was significantly suppressed by the anion used. Specifically, the rates of H2 production decreased in the order KF > KCl > KI, meaning that I- most strongly suppressed HER.

View Article and Find Full Text PDF

Hierarchically Porous Polypyrrole Foams Contained Ordered Polypyrrole Nanowire Arrays for Multifunctional Electromagnetic Interference Shielding and Dynamic Infrared Stealth.

Nanomicro Lett

December 2024

School of Chemistry, Key Laboratory of Advanced Technologies of Materials (Ministry of Education), Southwest Jiaotong University, Chengdu, 610031, People's Republic of China.

As modern communication and detection technologies advance at a swift pace, multifunctional electromagnetic interference (EMI) shielding materials with active/positive infrared stealth, hydrophobicity, and electric-thermal conversion ability have received extensive attention. Meeting the aforesaid requirements simultaneously remains a huge challenge. In this research, the melamine foam (MF)/polypyrrole (PPy) nanowire arrays (MF@PPy) were fabricated via one-step electrochemical polymerization.

View Article and Find Full Text PDF

Epitaxy Orientation and Kinetics Diagnosis for Zinc Electrodeposition.

ACS Nano

December 2024

College of Energy, Soochow Institute for Energy and Materials InnovationS (SIEMIS), Key Laboratory of Advanced Carbon Materials and Wearable Energy Technologies of Jiangsu Province, Jiangsu Key Laboratory of Advanced Negative Carbon Technologies, Soochow University, Suzhou 215123, P. R. China.

An accurate assessment of the electrodeposition mechanism is essential for evaluating the electrochemical stability and reversibility of the metal anodes. Multiple strategies aimed at uniform Zn deposition have been extensively reported, yet it is challenging to clarify the Zn crystal growth regularity and activity due to the obscured physicochemical properties of as-deposited Zn. Herein, we present a protocol for elucidating the controlled epitaxial growth process of Zn crystals and quantifying their surface electrochemical activity using scanning electrochemical microscopy.

View Article and Find Full Text PDF

Want AI Summaries of new PubMed Abstracts delivered to your In-box?

Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!