This paper presents an in vivo test for assessment of regenerate axial stiffness after the distraction phase of lengthening therapy. The test result supplements radiography in evaluating bone healing and assists in determining when the regenerate stiffness is sufficient for removal of the external fixator. The test is non-invasive and does not require fixator removal. The theoretical basis for the method is that an externally applied load is shared between the fixator and the regenerating bone. The amount of load carried by the regenerate depends on its axial stiffness, which increases with advanced mineralization. By measuring the force in the fixator while applying a known external load to the limb, the load-share ratio between fixator and limb can be assessed. A load-share ratio of 100% indicates that the entire load is carried by the fixator. The ratio decreases as the regenerate structure gradually stiffens. In a clinical trial of 22 individuals with tibial lengthening, the fixator was removed when the load-share ratio dropped below 10%. None of the patients experienced fracture after removal of the fixator.
Download full-text PDF |
Source |
|---|---|
| http://dx.doi.org/10.1016/j.orthres.2004.08.024 | DOI Listing |
Publication Analysis
Top Keywords
Similar Publications
Finite element modeling of clavicle fracture fixations: a systematic scoping review.
Med Biol Eng Comput
January 2025
Department of Orthopaedics, School of Medicine, Ruijin Hospital, Shanghai Jiao Tong University, Shanghai, China.
Finite element analysis has become indispensable for biomechanical research on clavicle fractures. This review summarized evidence regarding configurations and applications of finite element analysis in clavicle fracture fixation. Seventeen articles involving 22 clavicles were synthesized from CINAHL, Embase, IEEE Xplore, PubMed, Scopus, and Web of Science databases.
View Article and Find Full Text PDFIron-histidine Coordination in Cytochrome b5: A Local Vibrational Mode Study.
Chemphyschem
January 2025
Southern Methodist University, Chemistry, 3251 Daniel Ave, 75275, Dallas, UNITED STATES.
We analyzed the intrinsic strength of distal and proximal FeN bonds and the stiffness of the axial NFeN bond angle in a series of cytochrome b5 proteins isolated from various species, including bacteria, animals, and humans. Ferric and ferrous oxidation states were considered. As assess- ment tool, we employed local vibrational stretching force constants ka(FeN) and bending force constants ka(NFeN) derived from our local mode theory.
View Article and Find Full Text PDFEffect of Clamped Member Material and Thickness on Bolt Self-Loosening Under Transverse Loads.
Materials (Basel)
January 2025
Department of Mechanical Engineering, École de Technologie Supérieure, 1100 Notre-Dame Ouest, Montreal, QC H3C 1K3, Canada.
Bolted joints, prevalent in industrial applications for component fastening, are susceptible to self-loosening-a critical issue resulting in a gradual reduction in clamping force. Gaining insight into the underlying mechanisms of self-loosening is crucial. While prior research has largely focused on evaluating component stiffness, limited attention has been given to its impact on the self-loosening behavior of bolted joints under transverse cyclic loading.
View Article and Find Full Text PDFIncreased stiffness with medial column screw supplementation of lateral locking plate for distal femur fractures: a biomechanical study.
Arch Orthop Trauma Surg
January 2025
Department of Orthopaedics, Wright State University, 30 E Apple St., Suite 2200, Dayton, OH, 45409, USA.
Introduction: We propose and assess the biomechanical stability of medial column screw supplementation in a synthetic distal femur fracture model.
Materials And Methods: Twenty-four low density synthetic femora modeling osteoporotic, intraarticular distal femur fractures with medial metaphyseal comminution were split into two fixation groups: (1) lateral locking distal femur plate (PA- plate alone) and (2) lateral locking distal femur plate with a 6.5 mm fully threaded medial cannulated screw (PWS- plate with screw).
Development and biomechanical evaluation of a 3D printed analogue of the human lumbar spine.
3D Print Med
January 2025
Musculoskeletal Biomechanics Research Lab, Department of Mechanical Engineering, McGill University, 845 Sherbrooke St. W (163), Montréal, QC, H3A 0C3, Canada.
Background: There exists a need for validated lumbar spine models in spine biomechanics research. Although cadaveric testing is the current gold standard for spinal implant development, it poses significant issues related to reliability and repeatability due to the wide variability in cadaveric physiologies. Moreover, there are increasing ethical concerns with human dissection practices.
View Article and Find Full Text PDFWant AI Summaries of new PubMed Abstracts delivered to your In-box?
Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!