Shear-induced smectic ordering and crystallisation of isotactic polypropylene (iPP) has been studied with in-situ small- and wide-angle X-ray scattering. Shear-induced smectic bundles with a periodicity of about 4 nm have been observed at temperatures below as well as above the melting point. This applies to iPP of different molecular weight and from different sources. An increase in the average molecular weight leads to a larger periodicity of the smectic layers. The smectic layers assemble in a fibrillar morphology with a length and a width up to 200 and 10 microm, respectively. After crystallisation, the smectic bundles show upon heating higher melting temperatures than their crystalline counterparts. In agreement with this behaviour, the correlation length along the smectic layer normal is of the order of tens of nanometers, much larger than the crystal thickness. We present an anisotropic drop model of smectic domains forming a conserved system in which the smectic layers can rotate. On the basis of this model we can explain the relative orientation of the smectic layers, the crystalline lamellae and the long axis of the drop, as well as the reversibility of the smectic periodicity during cooling and heating. In the supercooled melt, the smectic ordering is followed by crystallisation; during this process crystals grow epitaxially on the surface of the smectic bundles. This leads to a new picture of the shish-kebab structure in which smectic bundles rather than extended-chain crystals play the role of the shish. The crystallisation process of the smectic regions themselves indicates that the 'mesophase' previously reported in fast-quenched iPP, is a metastable state formed during the transition from the high-temperature smectic phase to a crystal. Moreover smectic domains rather than alpha crystallites form the nuclei for crystallisation of the beta phase. The high-temperature smectic phase presents an ideal model system to study the coupling between density and conformational ordering under shear flow. Our results support a nucleation and growth process for polymer crystallisation, in which smectic bundles or other mesophases are the primary nuclei.
Download full-text PDF |
Source |
---|---|
http://dx.doi.org/10.1039/b402659d | DOI Listing |
Phys Chem Chem Phys
August 2023
CAS Key Laboratory of Theoretical Physics, Institute of Theoretical Physics, Chinese Academy of Sciences, 55 East Zhongguancun Road, P. O. Box 2735, Beijing, 100190, China.
We perform molecular dynamics simulations to investigate the transition processes of [C/CMIm][NO] binary mixtures by varying the cation ratio of C to C at a fixed temperature of 400 K. The cation ratio is tuned by ranging C percentage from 0% to 100% with a fixed number of 4096 total simulated ion pairs. Our simulated-annealing results indicate that, at 400 K, pure C is a homogeneous liquid whilst pure C is an ionic liquid crystal (ILC) of smectic-B (SmB) type.
View Article and Find Full Text PDFNanoscale
September 2021
Department of Chemical Engineering, National Taiwan University, Taipei 10617, Taiwan, Republic of China.
Large-scale spatial arrangement and orientation ordering of nanorod assembly on substrates are critical for nanodevice fabrication. However, complicated processes and templates or surface modification of nanorods are often required. In this work, we demonstrate, by dissipative particle dynamics simulations, that various ordered structures of adsorbed nanorods on smooth substrates can be simply achieved by non-affinity adsorption.
View Article and Find Full Text PDFNano Lett
February 2019
Department of Chemical and Biomolecular Engineering (BK21+ Program), KAIST Institute for the NanoCentury , Korea Advanced Institute of Science and Technology (KAIST), Daejeon 34141 , Korea.
Electronic devices comprised of nanocrystal (NC) thin film are projected to demonstrate enhanced figure of merit if NC building blocks self-assemble into highly uniform, 2-dimensional (2-D) superstructures with long-range order. Despite intensive research efforts and remarkable progress, long-range assembly of colloidal anisotropic NCs into thin films with orientational and positional order has remained to be addressed. One of the most promising approaches is to dissolve excess free molecules into NC solution, which has enabled the formation of NC monolayers with exceptional quality at air/solution interface.
View Article and Find Full Text PDFACS Nano
April 2017
Department of Bioengineering, University of California, Berkeley, California 94720, United States.
The mammalian olfactory system provides great inspiration for the design of intelligent sensors. To this end, we have developed a bioinspired phage nanostructure-based color sensor array and a smartphone-based sensing network system. Using a M13 bacteriophage (phage) as a basic building block, we created structural color matrices that are composed of liquid-crystalline bundled nanofibers from self-assembled phages.
View Article and Find Full Text PDFACS Macro Lett
September 2014
Beijing National Laboratory for Molecular Sciences, Key Laboratory of Polymer Chemistry and Physics of Ministry of Education, College of Chemistry, Peking University, Beijing 100871, China.
Self-organization of liquid crystalline (LC) polyacetylene derivatives (PAs) bearing hemiphasmid side-chains was investigated. The synthesized PAs can form smectic and columnar phases, depending on the constitutions of side chains. With a nanosegregation structure, the columnar phase of PAs takes a bundle of chains as its building block, of which the chain number is precisely determined by the volume fraction of the rigid component in PAs.
View Article and Find Full Text PDFEnter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!