Polymer stent coatings may not be suitable for drug elution because of inherent proinflammatory effects. A previous study suggested a beneficial effect of a stent eluting tacrolimus from a nanoporous ceramic aluminum oxide coating in a rabbit restenosis model. We investigated whether this stent is effective in preventing in-stent restenosis in a porcine restenosis model. Thirty-four juvenile swine underwent balloon overstretch injury and were subjected to implantation of either stainless steel (bare) stents, bare stents coated with nanoporous aluminum oxide alone, and coated stents eluting 50 and 180 mug of tacrolimus (FK506). In-stent restenosis was quantified at 1 and 3 months after stent placement by histomorphometry. A significant increase of neointimal hyperplasia was noted with the stents coated with aluminum oxide alone compared with bare stents (2.92 +/- 1.02 and 1.38 +/- 0.51 mm(2), respectively; P < 0.02). In all arteries containing coated stents, particle debris was found in the media and neointima, resulting in augmented vascular inflammation. In the group of stents coated with aluminum oxide, FK506 elution at a dose 180 mug reduced neointimal hyperplasia vs. no drug elution (1.66 +/- 0.49 vs. 2.92 +/- 1.02 mm(2); 180 mug vs. ceramic alone; P < 0.03). At a dose of 50 mug stent-based delivery of FK506, no reduction of neointimal hyperplasia was found (2.88 +/- 1.31 and 2.92 +/- 1.02 mm(2), respectively; P = NS; FK506 vs. ceramic alone). In summary, particle debris shed from a drug-eluting aluminum oxide coating of a stainless steel stent counteracts potential antiproliferative effects of stent-based tacrolimus delivery in a porcine model of restenosis. We propose that stent coatings eluting drugs need to be routinely tested for being tightly anchored into the stent surface. Alternatively, omission of any coating used as a drug reservoir may eliminate inflammatory particle debris after placement of drug-eluting stents.
Download full-text PDF |
Source |
---|---|
http://dx.doi.org/10.1002/ccd.20213 | DOI Listing |
BMC Oral Health
January 2025
Department of Basic Medical Science, Faculty of Medicine, Yozgat Bozok University, Yozgat, 66100, Türkiye, Turkey.
Background: Although surface finishing processes are effective against Streptococcus mutans biofilm, the mechanism of action of saliva with different acidity values has not been studied in detail. This study aims to produce four different all-ceramic materials in a single session with CAD/CAM devices and apply two different surface finishing processes, glazing and polishing, and then determine the retention of Streptococcus mutants on the surfaces of the materials in saliva with varying levels of acidity.
Methods: Zirconia-reinforced lithium silicate (Vita Suprinity, Vita Zahnfabrik, Bad Saöckingen, Germany), monochromatic feldspar (Vitablocs Mark 2, Vita Zahnfabrik, Bad Saöckingen, Germany), leucite glass ceramic (IPS Empress CAD, Ivoclar Vivadent, Liechtenstein), and monolithic zirconia (Incoris TZI (Cerec) Sirona, Germany) were used in the study.
ACS Omega
December 2024
Department of Electrical and Photonics Engineering, Technical University of Denmark, Roskilde 4000, Denmark.
This study examines the effect of ultrathin aluminum oxide (AlO) passivation layer on the performance of the kesterite CuZnSnS (CZTS) solar cells. The AlO layer was applied at the back CZTS/Mo interface using atomic layer deposition (ALD). Our findings indicate that the interface passivation with AlO can significantly enhance the adhesion of CZTS to Mo, preventing delamination during annealing.
View Article and Find Full Text PDFLight Sci Appl
January 2025
Aalto University, Department of Electronics and Nanoengineering, Espoo, Finland.
Even though efficient near-infrared (NIR) detection is critical for numerous applications, state-of-the-art NIR detectors either suffer from limited capability of detecting incoming photons, i.e., have poor spectral responsivity, or are made of expensive group III-V non-CMOS compatible materials.
View Article and Find Full Text PDFWater Res
December 2024
Department of Chemistry and Chemical Engineering, Inha University, Incheon, 22212, Republic of Korea; Program in Biomedical Science and Engineering, Inha University, Incheon, 22212, Republic of Korea; NanoRaman Analysis Corp., 100, Inha-ro, Michuhol-gu, Incheon, Republic of Korea. Electronic address:
Nanoplastics (NPs) are growing concerns for health and the environment, being widely distributed across marine, freshwater, air, and biological systems. Analyzing NPs in real environmental samples requires pretreatment, which has traditionally been complex and often leads to underestimation in actual samples, creating a gap between real-world conditions and research findings. In this study, we propose using anodic aluminum oxide (AAO) membrane as a direct Raman substrate for particles on a filter, achieving complete recovery during separation and concentration while simplifying the pretreatment stages.
View Article and Find Full Text PDFBiosens Bioelectron
December 2024
College of Food Science and Engineering, Collaborative Innovation Center for Modern Grain Circulation and Safety, Key Laboratory of Grains and Oils Quality Control and Processing, Nanjing University of Finance and Economics, Nanjing, Jiangsu, 210023, PR China. Electronic address:
An innovative integrated three-dimensional (3D) bioprinted gastric microtissue electrochemical biosensor was developed in this study for the detection of allergen ovalbumin (OVA). In this system, OVA triggers the release of histamine from gastric microtissue, which then undergoes a redox reaction on the electrode surface, leading to an increase in the peak current. Gelatin methacrylate hydrogel serves as a scaffold for the 3D culture of RBL-2H3 and PC-12 cells for partially restoring allergic reactions in the human body in vitro.
View Article and Find Full Text PDFEnter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!